• 한국지구과학회지
• /
• 제42권5호
• /
• pp.571-587
• /
• 2021

본 연구는 귀추가 적용된 야외 지질 답사에서 중학생들의 관찰을 통한 문제 인식과 단서 포착 과정을 조사했다. 이를 위해 진단 평가, 야외 지질 답사, 답사 정리 순서로 진행되는 8회에 걸친 프로그램을 개발하여 중학교 1학년 학생 6명에게 적용했다. 야외 지질 답사는 2회로 자료 제공, 관찰, 규칙 생성, 가설 생성, 최종 가설 발표 순서로 진행됐다. 연구 자료로 야외 지질 답사 수업 녹음 및 녹화 자료, 학생 활동지 등이 수집되어 질적으로 분석됐다. 분석 결과, 야외 지질 답사 수행에서 세 가지 관찰 양상이 나타났다. 첫째, 관찰한 후 단서로 활용한 경우, 둘째, 관찰한 후 단서로 활용하지 않은 경우, 셋째, 관찰하지 못해 단서로 활용하지 않은 경우 등이다. 각각은 단서의 지질학적 중요도, 주목도, 단서의 종류, 관찰 특징(주목도 요소), 단서 활용 내용, 단서 버림 이유 등으로 구분할 수 있다. 이러한 결과를 종합해 각 양상에 해당하는 교육적 적용 방안을 모색하여 제시했다.

• 한국주거학회논문집
• /
• 제15권6호
• /
• pp.47-56
• /
• 2004

In the North-eastern districts of China, Northern races inherited and developed their own cultural traditions. The housing of northeastern China has been changed under the influence of environment. Some tribes' housings has been developed, keeping their own peculiar style, while others have divested of their ethnic flavor. To understand these aspects of development, this study focused on the housings in Heilongjiang and Nei Monggol. As for the procedure, this study referred to the literature and carried out a field trip at the same time. The housing of northeastern China has undergone the process to fix their residence after the life of migration in common. In this process, northeastern hosing has changed variously and can be grouped into the several types by shape and material. From the point of view about living pattern, some important living features are extracted by the types.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1385-1387
• /
• 2004

This paper presents a modelling methodology using fuzzy logic and train performance simulation for determining an economical running pattern for a high speed train which minimizes energy consumption under an given trip margin. The economical running pattern is defined with an economical maximum speed in traction phase, a speed at the end of coasting. As a case study, the simulation is carried out for an economical run of korea high speed train prototype, and the results of fuzzy model described.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1132-1137
• /
• 2008

Automatic Operation based on ATO (Automatic Train Operation) is necessary for driverless Light Rail Transit business. When this kind of driverless LRT operation plan is made, TPS (Train Performance Simulation) is traditionally simulated at all-out mode and coasting mode based on manual operation. Commercial schedule speed equals to all-out speed minus $9{\sim}15%$ make-up margin. Coasting mode TPS simulation is also run at commercial schedule speed to calculate run time and energy consumption. But TPS based on manual operation should make an improvement on accuracy in case of driverless LRT operation Plan. In this paper, new fast mode TPS simulation using ATO pattern is proposed and show near actual ATO result. The actual ATO pattern can be accurately simulated with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. Normal mode TPS simulation for commercial schedule speed can be designed to have fast mode trip time plus 3 seconds/km margin recommended by korean standard LRT specification.

• 대한교통학회지
• /
• 제33권4호
• /
• pp.393-404
• /
• 2015

기존의 중력모형은 통행비용 변수만으로 존 간 특성을 설명하기 때문에 많은 한계점을 갖게 된다. 현대 도시의 통행 패턴은 거리나 비용뿐만이 아니라 존 별 특성과 교통인프라 수준 등의 영향을 받기 때문이다. 따라서 장래 통행을 합리적으로 추정하기 위해서는 이러한 특성을 고려한 모형이 개발되어야 한다. 본 연구는 이러한 관점에서 접근성 변수를 중력모형의 설명 변수로 도입하였다. 이와 함께 변수가 추가에 따른 2단계 정산기법을 제안하였다. 이는 통행저항함수의 계수를 회귀분석을 통해 우선 추정한 뒤, 존별 균형인자를 순차적으로 추정하는 방법이다. RMSE, E-norm, C.R을 활용한 접근성을 도입한 중력모형의 검증 결과, 기존의 중력모형보다 통행패턴의 구현 능력이 향상된 점을 확인하였다. 특히, 단거리 통행량 추정에 어려움을 겪은 기존 모형의 한계점을 해결하였다는 점이 주목할 만 하다. 결론적으로 본 연구는 새로운 중력모형의 정산기법을 제안함과 동시에 접근성 변수의 도입을 통해 존 간 특성을 구현하였다는 점에서 통행분포모형의 개선 가능성을 제시하였다.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.52-60
• /
• 2018

최근 자동차 산업에서는 연비향상 및 안전규제 강화에 따라 차량 경량화가 필수적으로 요구됨에 따라 DP강(Dual Phase steel), CP강(Complex Phase steel), MS강(Martensitic Steel), TRIP강(Transformation Induced Plasticity steel), TWIP강(Twinning Induced Plasticity steel) 등과 같은 인장강도 700MPa 이상인 초고장력강(Ultra High Strength Steel)의 적용이 증가하고 있다. 초고장력강을 차체에 적용하기 위해서는 용접공정이 필수적이며, 원가 측면에서 유리한 전기저항점용접(Resistance Spot Welding, RSW)이 차체 용접에서 80%이상으로 가장 많이 적용되고 있다. 초고장력강은 강도향상을 위해 합금원소 함량을 늘이기 때문에 일반적으로 용접성이 열악한 것으로 알려져 있다. 이러한 초고장력강의 저항점용접의 경우 적정 용접조건 영역이 축소되고 용접부에서 계면파단 및 부분계면파단이 발생하는 것으로 보고되어 있어 결함 및 품질을 실시간으로 예측할 수 있는 용접품질 판정 연구가 활발히 진행되고 있다. 이에 따라 본 연구에서는 저항 점 용접을 수행할 때 검출되는 2차 회로 공정 변수를 이용하여 용접부의 동저항을 모니터링하고, 이 동저항 패턴에서 용접 품질 판단에 필요한 인자들을 추출하였다. 추출한 인자들을 상관분석하여 용접 품질과의 상관성을 파악하였으며, 상관성이 높은 인자들을 이용하여 회귀분석을 실시하였다. 이를 근거로 현장 적용이 가능한 회귀 모델을 제시하였다.

• 한국자동차공학회논문집
• /
• 제20권4호
• /
• pp.60-67
• /
• 2012

Most of a driving cycle is used to measure fuel consumption (FC) and emissions for a specified vehicle. A driving cycle was reflected geography and traffic characteristics for each country, also, driving pattern is affected these parameters such as vehicle dynamics, FC and emissions. Therefore, this study is an attempt to develop a driving cycle for military operational area. The proposed methodology the driving cycle using micro-trips extracted from real-world data. The methodology is that the driving cycle is constructed considering important parameters to be affected FC. Therefore, this approach is expected to be a better representation of heterogeneous traffic behavior. The driving cycle for the military operational area is constructed using the proposed methodology and is compared with real-world driving data. The running time and total distance of the final cycle is 1461 s, 13.10 km. The average velocity is 32.25 km/h and average grade is 0.43%. The Fuel economy in the final cycle is 5.93 km/l, as opposed to 6.10 km/l for real-world driving. There were about 3% differences in driving pattern between the final driving cycle and real-world driving.

• 대한교통학회지
• /
• 제11권1호
• /
• pp.5-22
• /
• 1993

This study examines the 1980 Census and the 1987 Travel Survey data sets, in order to identify commuting trends in the Seoul Metropolitan Area. The commuting field of Seoul includes the cities and counties contiguous to Seoul, as well as Inchon, Suwon and Ansan City and Paju County. The study finds little support for the expansion of the commuting field toward distant counties of Kyonggi Province; instead an intensification of commuting within the field is more salient. The most prominent trend, within the city limit of Seoul, is that journey-to-work toward the city center has decreased whereas peripheral journeys increased considerably. The work trips have increased most in the southwestern sector of the city; a moderate increase in the northeastern and southwestern sectors; and decreases in the center and the northwestern sector of the city. Factorial analyses of the work trip data also reveal the emergence of sub-regions of journey-to-work in the peripheries of the city. Such a spatial pattern of commuting changes resemble that of population changes, and correspond in part to the layout of the subway system.

• 대한교통학회지
• /
• 제1권1호
• /
• pp.48-55
• /
• 1983

One of the major objectives of a transportation study is to provide the transportation networks for future years in order to accommodate the projected transport demand for the movement of passengers and goods utilizing the optimum "mix" of modes. To achieve this goal, the planning process starts with collection and analysis of data to determine the existing traffic demand and travel pattern, and to assign the future trip interchanges on th existing and planned networks to determine areas of improvements so that it can cope with increasing future traval demand. The purpose of this paper attempts to explain the public transport network formulation techniques which can be easily applied to the large urban area multi modal public transport system.

• 소성∙가공
• /
• 제10권6호
• /
• pp.465-470
• /
• 2001

Hole flanging experiments are performed on flat circular plates with a hole in the center and the flangeability and fracture behaviors of TRIP steels and ferrite-Bainite duplex steels were examined. In the hole flanging, deformation by lip and petalling occurs when plates are struck by punches of various shapes and high circumferential strains induced in the target material cause radial cracking and the subsequent rotation of the affected plate material in a number of symmetric petals. In all cases, failure of the plate was due to lip fracture that results from multiple localized neckings that take place around the hole periphery where straining is most severe and a somewhat regular pattern was observed in a fracture shape. The neck characteristics in flange formation and the transition from the lip to petal mode at which fracture occurs were compared with two materials.