• 한국환경과학회지
• /
• 제22권7호
• /
• pp.863-871
• /
• 2013

Dielectric discharges are an emerging technique in environmental pollutant degradation, which that are characterized by the production of hydroxyl radicals as the primary degradation species. For practical application of the plasma reactor, reactor that can handle large amounts of water are needed. Plasma research to date has focused on small-scale water treatment. This study was carried out basic study for scale-up of a single DBD (dielectric barrier discharge) plasma reactor. The degradation of N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the generation of OH radical) was used as a performance indicator of multi-plasma reactor. The experiments is divided into two parts: design parameters [effect of distance of single plasma module (1~14 cm), arrangement of ground electrode (single and multi), rector number (1~5) and power number (1~5)]; operation parameter [effect of applied voltage (60~220 V), air flow rate (1~5 L/min), electric conductivity of solution ($1.4{\mu}S/cm$, deionized water)~18.8 mS/cm (addition of NaCl 10 g/L) and pH (5~9)]. Considering the electric stability of the plasma reactor, optimum spacing between the single plasma module was 2 cm. Multi discharge electrodes - single ground electrode array was selected. Combination of power 3-plasma module 5 was the optimal combination for maximum RNO degradation. The optimum 1st voltage and air flow rate for RNO degradation were 180 V and 4 L/min, respectively. The pH and conductivity of the solution was not influencing the RNO degradation.

• 대한장애인치과학회지
• /
• 제15권1호
• /
• pp.7-13
• /
• 2019

The aim of this study was to clarify the barriers of dental treatment for special needs patients felt by dentists and to determine the dentist-related factors contributing to the obstacles in treatment planning and decision making. Questionnaires were distributed and responded by dentists working at five public-based special care clinics in South Korea. Factors divided into three parts (dentist demographics, clinical factors, and educational and administrational factors) were assessed and analyzed for correlations between dentist-related factors and dentist-felt burdens for special care treatment. Fisher's exact test and Chi-square test were used at the level of 0.05. A total of 34 dentists responded to the questionnaires. Almost all dentists had obstacles in the treatment of special needs patients in terms of the patients' lack of cooperation (94.1%), proxy communication with caregivers (94.1%), payment reward system (63.6%), deficient workforce (67.7%), and others. The longer dentists had been practicing for special needs patients, the more they were dissatisfied with the reward system and a longer time was spent for communication with patients and their caregivers (p<0.05). For specialists, more obstacles were experienced in treatment planning due to a deficiency in the clinical information obtained from their patients compared to general practitioners (p<0.05). A total of 82.4% of the respondents approved of mandatory educational programs for special care dentists. There were practitioner-based factors related to the amount of obstacles felt by special care dentists. To overcome the treatment barrier of special needs patients, in-depth education and training are required in special care dentistry.

• Journal of Periodontal and Implant Science
• /
• 제29권3호
• /
• pp.539-553
• /
• 1999

The purpose of this 6-months study was to compare the clinical and radiographic outcomes following guided tissue regeneration treating human mandibular Class II furcation defects with a bioabsorbable BioMesh barrier(test treatment) or a nonabsorbable ePTFE barrier(control treatment). Fourteen defects in 14 patients(mean age 44 years) were treated with BioMesh barriers and ten defects in 10 patients(mean age 48 years) with ePTFE barriers. After initial therapy, a GTR procedure was done. Following flap elevation, root planing, and removal of granulation tissue, each device was adjusted to cover the furcation defect. The flaps were repositioned and sutured to complete coverage of the barriers. A second surgical procedure was performed at control sites after 4 to 6 weeks to remove the nonresorbable barrier. Radiographic and clinical examinations(plaque index, gingival index, tooth mobility, gingival margin position, pocket depth, clinical attachment level) were carried out under standardized conditions immediately before and 6 months after surgery. Furthermore, digital subtraction radiography was carried out. All areas healed uneventfully. Surgical treatment resulted in clinically and statistically equivalent changes when comparisons were made between test and control treatments. Changes in plaque index were 0.7 for test and 0.4 for control treatments; changes in gingival index were 0.9 and 0.5. In both group gingival margin position and pocket depth reduction was 1.0mm and 3.0mm; clinical attachment level gain was 1.9mm. There were no changes in tooth mobility and the bone in radiographic evaluation. No significant(p${\leq }$0.05) difference between the two membranes could be detected with regard to plaque index, gingival index, gingival margin position, pocket depth, and clinical attachment level. In conclusion, a bioabsorbable BioMesh membrane is effective in human mandibular Class II furcation defects and a longer period study is needed to fully evaluate the outcomes.

• 박물관보존과학
• /
• 제22권
• /
• pp.53-68
• /
• 2019

성남시 고등동에서 확인된 조선시대 회격묘 2기는 우씨 묘역에서 발굴되어 기록을 통해 묘주와 조성 시기를 유추 할 수 있는 유구이다. 말각방형으로 합장묘인 4호묘는 수습과정 중 외곽벽에서 글씨와 그림이 확인되었으며, 보존처리 및 적외선조사 결과 만사로 판단되었다. 말각장방형 단묘인 6호묘는 파묘되면서 일부 파괴되어 수습 후 야외전시 될 예정이었다. 그러나 보존처리 결과 운아삽과 역청이 확인되고 잔존하는 형태가 조선시대 회격묘의 양상을 잘 보여주고 있어 자문회의를 통하여 실내전시로 보존방향이 변경되었다. 역청은 분석 결과 송진으로 추정되며 이물질의 혼입으로 순도는 높지 않은 것으로 확인되었다. 2기의 회격묘는 조선시대 무덤 양식의 변화 양상 등 학술연구에 있어 중요한 자료로 활용될 것으로 기대된다.

• Applied Microscopy
• /
• 제41권3호
• /
• pp.197-204
• /
• 2011

백차 열수추출물의 염증 및 피부장벽 손상완화 효과를 알아보기 위해 생후 6~7주령 암컷 SKH-1 hairless 마우스 등 부위에UVB를 12주간 조사하여 피부노화를 유발시킨 후, 실험동물을정상군(N), 대조군(UVB+saline, C), 양성대조군(UVB+0.01%retinoic acid, PC), 실험군1 (UVB+1% white tea water extract, E1), 실험군2 (UVB+2% white tea water extract, E2)로 나누어 1일 2회, 주 5일, 4주 동안 매회 200 ${\mu}L$씩 시료를 도포하여 다음과 같은 결과를 얻었다. (1) 피부 홍반도 측정에서, 실험 4주 후 C군에비해 PC, E1, E2군은 각각 31, 41, 46% 유의하게(p<0.001) 낮았다. (2) 수분함량 측정에서, 실험 4주 후 C군에 비해 PC, E1, E2군은 각각 190, 207, 225% 유의하게(p<0.001) 높았다. 경표피수분 손실량(transepidermal water loss, TEWL) 측정에서, 실험 4주후 C군에 비해 PC, E1, E2군은 각각 61, 79, 85% 유의하게(p<0.001) 낮았다. 조직학적 관찰에서, C군에 비해 E1, E2군은 표피층과 진피층의 비후, 비만세포수와 탈과립 정도가 현저하게 경감되었다. 이상의 연구결과를 종합할 때, hairless 마우스를 이용한in vivo 실험에서 백차 열수추출물 경피 도포는 자외선 조사로 인해 유발된 피부장벽 손상 및 염증 반응에 상당한 개선 효과가 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.176-177
• /
• 2016

In the last few decades, attention toward atmospheric pressure plasma (APP) has been greatly increased due to the numerous advantages of those applications, such as non-necessity of high vacuum facility, easy setup and operation, and low temperature operation. The practical applications of APP can be found in a wide spectrum of fields from the functionalization of material surfaces to sterilization of medical devices. In the secondary battery industry, separator film has been typically treated by APP to enhance adhesion strength between adjacent films. In this process, the plasma is required to have high stability and uniformity for better performance of the battery. Dielectric barrier discharge (DBD) was usually adopted to limit overcurrent in the plasma, and we developed the pre-discharge technology to overcome the drawbacks of streamer discharge in the conventional DBD source which makes it possible to produce a super-stable plasma at atmospheric pressure. Simulations for the fluid flow and electric field were parametrically performed to find the optimized design for the linear jet plasma source. The developed plasma source (Plasmapp LJPS-200) exhibits spatial non-uniformity of less than 3%, and the adhesion strength between the separator and electrode films was observed to increase 17% by the plasma treatment.

• Nutrition Research and Practice
• /
• 제9권2호
• /
• pp.117-122
• /
• 2015

BACKGROUND/OBJECTIVES: Curcumin, a major component of the Curcuma species, contains antioxidant and anti-inflammatory properties. Although it was found to induce apoptosis in cancer cells, the functional role of curcumin as well as its molecular mechanism in anti-inflammatory response, particularly in intestinal cells, has been less investigated. The intestine epithelial barrier is the first barrier and the most important location for the substrate coming from the lumen of the gut. SUBJECTS/METHODS: We administered curcumin treatment in the human intestinal epithelial cell lines, T84 and Caco-2. We examined endoplasmic reticulum (ER) stress response by thapsigargin, qPCR of XBP1 and BiP, electrophysiology by wild-type cholera toxin in the cells. RESULTS: In this study, we showed that curcumin treatment reduces ER stress and thereby decreases inflammatory response in human intestinal epithelial cells. In addition, curcumin confers protection without damaging the membrane tight junction or actin skeleton change in intestine epithelial cells. Therefore, curcumin treatment protects the gut from bacterial invasion via reduction of ER stress and anti-inflammatory response in intestinal epithelial cells. CONCLUSIONS: Taken together, our data demonstrate the important role of curcumin in protecting the intestine by modulating ER stress and inflammatory response post intoxication.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.165-168
• /
• 2000

We fabricated ramp-edge Josephson junctions with barriers formed by interface treatments instead of epitaxially grown barrier layers. A low-dielectric Sr$_2$AlTaO$_6$(SAT) layer was used as an ion-milling mask as well as an insulating layer for the ramp-edge junctions. An ion-milled YBa$_2$Cu$_3$O$_{7-x}$ (YBCO)-edge surface was not exposed to solvent through all fabrication procedures. The barriers were produced by structural modification at the edge of the YBCO base electrode using high energy ion-beam treatment prior to deposition of the YBCO counter electrode. We investigated the effects of high energy ion-beam treatment, annealing, and counter electrode deposition temperature on the characteristics of the interface-controlled Josephson junctions. The junction parameters such as T$_c$, I$_c$c, R$_n$ were measured and discussed in relation to the barrier layer depending on the process parameters.

• 한국재료학회지
• /
• 제27권7호
• /
• pp.364-368
• /
• 2017

We performed temperature dependent current-voltage (I-V) measurements to characterize the electrical properties of $Au/Al_2O_3/n-Ge$ metal-insulator-semiconductor (MIS) diodes prepared with and without $H_2O$ prepulse treatment by atomic layer deposition (ALD). By considering the thickness of the $Al_2O_3$ interlayer, the barrier height for the treated sample was found to be 0.61 eV, similar to those of Au/n-Ge Schottky diodes. The thermionic emission (TE) model with barrier inhomogeneity explained the final state of the treated sample well. Compared to the untreated sample, the treated sample was found to have improved diode characteristics for both forward and reverse bias conditions. These results were associated with the reduction of charge trapping and interface states near the $Ge/Al_2O_3$ interface.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.286-290
• /
• 2020

The formation of inorganic thin films in low-temperature solution processes is necessary for a wide range of commercial applications of organic electronic devices. Aluminum oxide thin films can be utilized as barrier films that prevent the deterioration of an electronic device due to moisture and oxygen in the air. In addition, they can be used as the gate insulating layers of a thin film transistor. In this study, aluminum oxide thin film were formed using two methods simultaneously, a thermal process and the DUV process, and the properties of the thin films were compared. The result of converting aluminum nitrate hydrate to aluminum oxide through a hybrid process using a thermal treatment and DUV was confirmed by XPS measurements. A film-based a-IGZO TFT was fabricated using the formed inorganic thin film as a gate insulating film to confirm its properties.