• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.30-41
• /
• 2017

Types of noise barrier installed for noise attenuation are largely divided into noise-absorbing format and noise-proofing format. In these days, installation of transparent noise barrier is general trend to solve problems that hinder sunshine and landscape. Some kinds of transparent boards are used to one of components in noise barriers, but in some cases, less transparency and worse pollution due to yellowing phenomena, and severe material deformation are to harm the urban aesthetics Therefore laminated-tempered glass board in that yellowing phenomena does not occur can be replaced as a transparent one to secure those shortcomings. In this paper, the structural safety against train induced vibration and the resistibility to wind load are analyzed for laminated-tempered glass system as a component of noise barrier installed on Metro railway elevated bridges. Also the appropriateness is evaluated through flexural bending performance test, compressive strength test, modulus of elasticity tests, and impact test for the system or the glass material itself. All of these processes are intended to present the deployment of logic to evaluate the adequacy for the system.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.345-349
• /
• 2013

Yellow poplar is well known commercial hardwood species in the world because of its availability, rapid growth, large size, excellent form, early natural pruning, and the good working quality of the wood. Therefore, yellow poplar (Liriodendron tulipifera L.) has been adopted in South Korea for decades ago, and its cultivating the saplings and silvicultural system have been studied. However, yellow poplar is still embroiled in controversy for utilization of use and worth. This species has not only advantages such as lower weight, light color, and higher machinability and bending processing, but also has disadvantages which are bad smell and different colors on heartwood and sapwood. In this study, the objective was that use of yellow poplar board as furniture materials by drying and painting process. Thirty years old yellow poplar was cut and dried for 7 days by high-frequency dryness. Adjustment of color tone to walnut color was conducted with multiple colorants and various number of spread times. Uniform color of yellow poplar on heartwood and sapwood was accomplished by applying 1 time stain (green), 2 times transparent primer, 1 time middle-painting (walnut), and 2 times top-painting (walnut) in sequentially. The painted yellow poplar board was used to manufacture table and dressing table. During the furniture manufacture process, no critical issues were occurred on part of jointing and painting. This painting method may be useful data for future use of yellow poplar as furniture materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.640-645
• /
• 2020

To produce an input device stably using the transparent electromagnetic pattern of an electromagnetic induction method, pattern inspection is required in advance in the production process. Various methods of inspecting the capacitive pattern for hand-touch have been proposed, but it is difficult to find the related technical data for the pattern inspection method of the transparent electromagnetic induction method. In this study, to develop an inspection system for a fused electromagnetic resonance pen sensor with a copper-etched metal mesh pattern, an inspection algorithm and method for measuring the antenna impedance inside the sensor was proposed by measuring only the exposed FPCB connector. The proposed method was configured as a control board consisting of a microprocessor that forms a loop between specific channels according to the command of a computer, a computer-controlled by the Windows program, an LCR meter measuring the impedance between specific channels, and transmitting the measurement results back to the computer. An evaluation of the proposed system and measurements of nine specimens showed that it could detect the defects of the sensor used in the actual product.

• Archives of Plastic Surgery
• /
• v.48 no.2
• /
• pp.208-212
• /
• 2021

Background There are currently no guidelines for the postoperative wound management of the hard-palate donor site in cases involving mucosal harvesting. This study describes our experiences with the use of an artificial dermis for early epithelialization and transparent plate fixation in cases involving hard-palate mucosal harvesting. Methods A transparent palatal plate was custom-fabricated using a thermoplastic resin board. After mucosal harvesting, an alginic acid-containing wound dressing (Sorbsan) was applied to the donor site, which was then covered with the plate. After confirming hemostasis, the dressing was changed to artificial dermis a few days later, and the plate was fixed to the artificial dermis. The size of the mucosal defect ranged from 8×25 to 20×40 mm. Results Plate fixation was adequate, with no postoperative slippage or infection of the artificial dermis. There was no pain at the harvest site, but a slight sense of incongruity during eating was reported. Although the fabrication and application of the palatal plate required extra steps before and after harvesting, the combination of the artificial dermis and palatal plate was found to be very useful for protecting the mucosal harvest site, and resulted in decreased pain and earlier epithelialization. Conclusions The combination of artificial dermis and a transparent palatal plate for wound management at the hard-palate mucosal donor site resolved some of the limitations of conventional methods.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.3
• /
• pp.105-112
• /
• 2017

PCI Express is a bus technology that connects the processor and the peripheral I/O devices that widely used as an industry standard because it has the characteristics of high-speed, low power. In addition, PCI Express is system interconnect technology such as Ethernet and Infiniband used in high-performance computing and computer cluster. PGAS(partitioned global address space) programming model is often used to implement the one-sided RDMA(remote direct memory access) from multi-host systems, such as computer clusters. In this paper, we design and implement a OpenSHMEM API based on PCI Express maintaining the existing features of OpenSHMEM to implement RDMA based on PCI Express. We perform experiment with implemented OpenSHMEM API through a matrix multiplication example from system which PCs connected with NTB(non-transparent bridge) technology of PCI Express. The PCI Express interconnection network is currently very expensive and is not yet widely available to the general public. Nevertheless, we actually implemented and evaluated a PCI Express based interconnection network on the RDK evaluation board. In addition, we have implemented the OpenSHMEM software stack, which is of great interest recently.

• Education of Primary School Mathematics
• /
• v.22 no.1
• /
• pp.13-27
• /
• 2019

The use of grid paper in elementary mathematics textbooks is used in numbers and calculations, figures and measurement areas. Among them, it is used most in the figure area. In spite of this utilization, it is necessary to supplement it because it is difficult to revise or supplement the trial and error that often occurs in the course of the course, as the process of using the textbook paper in the actual class. The use of grid paper in elementary mathematics textbooks is used in numbers and calculations, figures and measurement areas. Among them, it is used most in the figure area. In spite of this utilization, it is necessary to supplement it because it is difficult to revise or supplement the trial and error that often occurs in the course of the course, as the process of using the textbook paper in the actual class. In this study, we tried to find out the usability of grid paper boards which can be used more effectively than the grid paper among the teaching aids presented in the 'Development of teaching aids standards for math class' of Korea Foundation for the Advancement of Science & Creativity(2017). A questionnaire survey was conducted on the use of grid paper and grid paper board for teachers who actually use grid paper in elementary mathematics. As a result, we found out the achievement criteria of grid paper board utilization and investigated the study subject which is effective to use grid paper board. In particular, we have identified specific learning topics that are effective in each area and presented specific activities.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.24-33
• /
• 2011

This paper describes a gateway system based on a MOST network for integrating several different automotive network protocols. For transparent data communication among different protocols regardless of the high-level messages and the data format, Pseudo MOST frame was designed based on MOST frame and this pseudo MOST data frame is used as the data carrier. For automotive application, two types of gateways were developed, one board-type gateway and small-sized module-type gateways. One board-type gateway has ethernet port, video port and audio port. Meanwhile, small-sized module-type gateways are developed for video, audio, bluetooth and Flexray, respectively. Experiments with a network system using several small-sized module gateways verified efficient data communication among different network protocols and confirmed the effectiveness of the proposed gateway system for automotive network integration.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.55-63
• /
• 2015

The need for estimating the real transaction price of land is increasing in order to build foundation for transparent land transaction and fair taxation. This study looked into the applicability of cokriging combining real transaction price of land, altitude and gradient for effective price estimation on the points where the real transaction does not take place in the course of using the real transaction price of land. The real transaction price of land have been estimated using the real transaction materials of Yeongcheon, Gyeongsangbuk-do from January 2012 to June 2014, and the results have been compared with the estimation results of ordinary kriging. As a result of analyzing the mean error and root mean square error (RMSE) of the estimated price and 2,575 verification points, it was found that compared to ordinary kriging, cokriging results were more effective in terms of the real transaction price estimation and actualization. The reason that cokriging is more effective in the real transaction price estimation is because it takes account of altitude and gradient which are the forces influencing the land value.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1936-1939
• /
• 2004

This paper proposes streaming layer for personal robot's middleware. Under assumption that robot has open architecture, i.e. consists of modules created by different vendors and intercommunication between these modules is necessary, we have to consider that there are many different network interfaces. To make communication between modules possible it is necessary to develop new type of middleware. Such middleware has to support different platforms, i.e. OS, network interface, hardware, etc. In addition, it is necessary to implement effective interface between network and application in order to manage inter application communications and use network resources more effectively. Streaming layer is such interface that implements necessary functionality together with simplicity and portability. Streaming layer provides high level of abstraction and makes communication between distributed applications transparent as if are located in same module. With possibility of extension by user defined application interfaces it is suitable for distributed environments, i.e. module based architecture including small-embedded systems like as DSP board. To verify the proposed streaming layer structure it is implemented using C and tested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.693-698
• /
• 2002

For the evaluation of the plasma display panel (PDP)'s noise, vibration and sound characteristics of fanless PDP are measured and investigated. PDP is a type of two-electrode vacuum tube which operates on the same principle as a household fluorescent light. An inert gas such as argon or neon is injected between two glass plates on which transparent electrodes have been formed, and the glass is illuminated by generating discharge. For this discharge, both high voltage and currents are needed and cause an acoustic noise. We investigated the noise characteristics connected with both a electromagnetic elements from SMPS to panel through X, Y and logic board, and a mechanical elements form panel to case through transfer path which related with vibration and heat. To reduce the noise of PDP, a discharge pulse memory design related with both higher brightness and lower power consumption is important and mechanical characteristics connected with dissipation process of both heat and vibration generated by panel discharge must be investigated.