• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.157-166
• /
• 2020

The city of Suwon has introduced a dockless bike for the first time in Korea. In this study, a questionnaire was conducted for citizens to suggest improvement through satisfaction analysis. As a result of the survey, 88 % of respondents awarded the presence of a bike, and 90 % answered positively in terms of bike policy; whereas mature civic ethics showed an low satisfaction. For the purpose of usage, approximately 75 % of users mainly used for commuting, business, shopping, and the connection with mass transit. In the result of the primary means of a trip, a private car was most preferred before operation; However, it was found that mode transition has been actively carried out. This suggests significant implications for implementing sustainable urbanism. Meanwhile, The level of satisfaction significantly differed in the field of payment method, charge, usage guidance and publicity by an occupation and age groups commonly. Satisfaction in bike maintenance was statistically differed by an occupation. Satisfaction in Rental-return and registration procedures showed differences by an age groups. The results of this study will contribute to establishment related policies and to more activate dockless shared bike.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.78-88
• /
• 2014

Now, UTIS collects and provides traffic information by building RSE 1,150(unit) and OBE about 51,000(vehicle). it's inevitable to enlarge traffic information sources which use to improve quality of UTIS traffic information for Stabilizing UTIS's service. but there are missing data sections. And, In this study as a way to overcome these problems, based on BIS(Bus information system) installed and operating in the capital area to develop normal vehicle's link transit time estimation model which is used realtime collecting BMS data, we'll utilize the model to provide missing data section's information. For these problem, we selected partial section of suwon-city, anyang-city followed by drive only way or not and conducted model estimating and verification each of BMS data and UTIS traffic information. Consequently, Case2,4,6,8 presented highly credibility between UTIS communication data and estimated value but In the Case 3,5 we determined to replace communication data of UTIS' missing data section too hard for large error. So we need to apply high credibility model formula adjusting road managing condition and the situation of object section.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.2
• /
• pp.216-232
• /
• 2016

In present, the Seoul City is undergoing traffic congestion problems caused by rapid urbanization and population growth. Thus the City government has reorganized the mass transportation system since 2004 and the subway has become a very important means for public transit. Since the subway system is typically a closed environment, the indoor air quality issues have often raised by the public. Especially since a huge amount of PM (particulate matter) is emitted from ground tunnels passing through the subway train, it is now necessary to assess the characteristics and behaviors of fine PM inside the tunnel. In this study, the concentration patterns of $PM_1$, $PM_{2.5}$, and $PM_{10}$ in the Seoul subway line-2 were analyzed by real-time measurement during winter (Jan 13, 2015) and summer (Aug 7, 2015). The line-2 consisting of 51 stations is the most busy circular line in Seoul having the railway of 60.2 km length. The the one-day average $PM_{10}$ concentrations were $148{\mu}g/m^3$ in winter and $66.3{\mu}g/m^3$ in summer and $PM_{2.5}$ concentrations were $118{\mu}g/m^3$ and $58.5{\mu}g/m^3$, respectively. The $PM_{2.5}/PM_{10}$ ratio in the underground tunnel was lower than the outdoor ratio and also the ratio in summer is higher than in winter. Further the study examined structural types of underground subsections to explain the patterns of elevated PM concentrations in the line-2. The subsections showing high PM concentration have longer track, shorter curvature radius, and farther from the outdoor stations. We also estimated the outdoor PM concentrations near each station by a spatial statistical analysis using the $PM_{10}$ data obtained from the 40 Seoul Monitoring Sites, and further we calculated $PM_{2.5}/PM_{10}$ and $PM_1/PM_{10}$ mass ratios near the outdoor subway stations by using our observed outdoor $PM_1$, $PM_{2.5}$, and $PM_{10}$ data. Finally, we could develop pollution maps for outdoor $PM_1$ and $PM_{2.5}$ near the line-2 by using the kriging method in spatial analysis. This methodology may help to utilize existing $PM_{10}$ database when managing and control fine particle problems in Korea.

• Journal of Korea Port Economic Association
• /
• v.35 no.2
• /
• pp.109-126
• /
• 2019

The Panmunjom Declaration adopted by the leaders of South and North Korea on April 27, 2018, has created an environment conducive for peace and cooperation in the Korean Peninsula. In the June of last year, South Korea has joined the Organization for Cooperation between Railways (OSJD). The membership of OSJD has established a solid foundation for restoring a multimodal logistics system that connects the Korean peninsula to Eurasia countries, including China and Russia. In this paper, a questionnaire survey targeting working-level experts was conducted to find the barriers in constructing multimodal logistics that efficiently connect the port-continental railways of the Korean peninsula and the Eurasian nations. Survey items were divided into five categories-border crossing procedures, technology, facilities, operation, and government support. As a result, among the most important problems of international multimodal logistics in Eurasia that need to be solved on priority include improving transshipment facilities, eliminating inspection carried out at every country for transit, simplifying documents for customs clearance, and minimizing the changes in freight rates. In conclusion, for vitalizing the connection between the Korean peninsula and the continental railways, it is necessary to develop a transshipment system to facilitate the changes in tracks at the borders by making a joint effort with the international community. Second, railway and operational systems in South Korea, North Korea, China, and Russia should be standardized. Third, international cooperation among South Korea, North Korea, China, and Russia is essential for simplifying customs clearance at borders, priority departure of domestic cargo, sharing information about the changes in freight rates, and so on. Finally, the government should come up with measures to secure the quantity of cargo required to form block trains, while developing new business models.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.64-78
• /
• 2019

This paper explores key factors affecting taxi travel using global positioning system(GPS) data in Seoul, Korea, considering spatial dependence. We first analyzed the travel characteristics of taxis such as average travel time, average travel distance, and spatial distribution of taxi trips according to the time of the day and the day of the week. As a result, it is found that the most taxi trips were generated during the morning peak time (8 a.m. to 9 a.m.) and after the midnight (until 1 a.m.) on weekdays. The average travel distance and travel time for taxi trips were 5.9 km and 13 minutes, respectively. This implies that taxis are mainly used for short-distance travel and as an alternative to public transit after midnight in a large city. In addition, we identified that taxi trips were spatially correlated at the traffic analysis zone(TAZ) level through the Moran's I test. Thus, spatial regression models (spatial-lagged and spatial-error models) for taxi trips were developed, accounting for socio-demographics (such as the number of households, the number of elderly people, female ratio to the total population, and the number of vehicles), transportation services (such as the number of subway stations and bus stops), and land-use characteristics (such as population density, employment density, and residential areas) as explanatory variables. The model results indicate that these variables are significantly associated with taxi trips.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.55-65
• /
• 2021

In January 2020, the first COVID-19 confirmed patient occurred in Korea, and the pandemic continues to this day. In unprecedented situations, COVID-19 also affected the transportation sector, and there were no appropriate measures against changes in traffic volume and use of public transportation due to changes in citizens' lifestyles. Currently, each local government has not established separate measures for pandemic disease measures. In order to establish future disease countermeasures in the transportation sector, a predictive model was developed by analyzing the traffic volume and the number of public transportation uses, and conducting correlation analysis with the current status of COVID-19. As a result of the analysis, the traffic volume decreased, but the traffic volume decreased due to the increase in personal transportation, but it did not reach the number of public transportation uses. In addition, it was analyzed that the use of public transportation was initially affected by the number of confirmed cases, but over time, it was more sensitive to death and mortality than to the number of confirmed cases.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.1
• /
• pp.73-96
• /
• 2013

ICAO's Universal Safety Oversight Audit Programme (USOAP) was initially launched in January 1995, in response to widespread concerns about the adequacy of aviation safety oversight around the world. The recent reduction in aircraft accidents and effective role that is evaluated on the basis of these results, and in 2013 the existing 'snapshot approach' to 'regular monitoring system (USOAP-Continuous Monitoring Approach)' was converted to. ICAO aviation safety assessment of the state in today's international community 'aviation safety credibility' as objective indicators to judge the enormous impact on the aviation industry, the state is not satisfactory, especially if the results of the evaluation and expansion of code-share airline ban, reduced international air transit passengers, including premium increases business and economic penalties should. In addition, ICAO implementation of the existing laws and regulations(Prescriptive Approach), but based on the Risk-based prevention model, Proactive Approach introduced the concept of aviation safety system, including international aviation safety policy has been to switch paradigms. This new ICAO international aviation safety policy also applies to the Government of the Republic of Korea in line with the aviation safey policies have changed. In particular, the systematic implementation of safety management for the existing laws and regulations in the center of the safety oversight system of risk-based introduction of the concept of proactive safety management, and According to international standards ICAO aviation service providers operate their own Safety Management System was set out in Aviation Law ever. In addition, the aviation safety is at the center of the field of the safety of aircraft operations and maintenance for the promotion is promoting various safety policies. This new paradigm shift in the international aviation safety policy in line with our state in the international community with the most exemplary aviation safety system firmly established itself as a model, the Government will strengthen the competitiveness of our aviation plans to support. To do this, the government, airlines, aviation officials try all the practical effect would be expected.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

• Journal of Internet Computing and Services
• /
• v.21 no.4
• /
• pp.109-116
• /
• 2020

With the advent of high-speed railways, railways are one of the most frequently used means of transportation at home and abroad. In addition, in terms of environment, carbon dioxide emissions are lower and energy efficiency is higher than other transportation. As the interest in railways increases, the issue related to railway safety is one of the important concerns. Among them, visual abnormalities occur when various obstacles such as animals and people suddenly appear in front of the railroad. To prevent these accidents, detecting rail tracks is one of the areas that must basically be detected. Images can be collected through cameras installed on railways, and the method of detecting railway rails has a traditional method and a method using deep learning algorithm. The traditional method is difficult to detect accurately due to the various noise around the rail, and using the deep learning algorithm, it can detect accurately, and it combines the two algorithms to detect the exact rail. The proposed algorithm determines the accuracy of railway rail detection based on the data collected.

• Journal of Radiation Protection and Research
• /
• v.21 no.3
• /
• pp.147-153
• /
• 1996

The Korea Atomic Energy Research Institute(KAERI) conducted a intercomparison study for personnel dosimetry services in Korea to enhance the accuracy and precision of the dosimetry system. Nine types of dosimeters(6 TLD, 3 film badge) from 7 institutions took part in this intercomparison study. Each participant submitted 30 dosimeters including transit control for irradiations. Both TLDs and film badges were irradiated with Cs-137 gamma, Sr/Y-90 beta and 4 X-ray beams in ISO wide series. Four dosimeters were irradiated on phantom with same dose equivalent for each field category. The delivered dose equivalent was in the range of $0.1{\sim}10mSv$. The participants assessed the results of their dosimeter readings in terms of the ICRU operational quantities for personal monitoring, Hp(10) and Hp(0.07). Most participants except 1 dosimeter estimated the delivered dose equivalent with biases less than ${\pm}25%$ for Cs-137 and Sr/Y-90. But for X-rays, the biases exceeded ${\pm}35%$ in some cases bacause the dose evaluation algorithm was based on the ANSI N13.11 X-ray fields which are different from those given by ISO.