• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.278-283
• /
• 2003

A generation rate of sludge in Korea had increased dramatically about 200 % for a decade. A requirement for high efficiency dewatering system being possible to produce the low water content cake have suggested due to the appearanceof commercial and social problems about handling of dewatered cake. The conventional dewatering system with mechanical compression device was not suitable to produce the low water content cake and didn'tcope with lots of requirements. Therefore, this paper was to develop the high efficient filter press with the compressive and heating forces through the heating plate to be built between membrane filter plates. It is possible to produce the low water content cake and improve the dewatering rate, so this equipment positively coped with several types of problems related to the sludge dewatering. The plate heated by heat transfer materials such as steam, hot water and thermo-oil made the sludge make the residual moisture within the cake to discharge easilyand to improve the dewatering efficiency of equipment. The pilot scale experiment with 500kg of cake production showed that the dewatering efficiency determined by the final water content and dewatering velocity was improved 30% more than the conventional dewatering equipment.

• 한국정보통신학회논문지
• /
• 제16권5호
• /
• pp.1029-1034
• /
• 2012

본 논문에서는 US-PCS(US-personal communications services)를 위해 사용이 가능한 저가격 고성능 FBAR (film bulk acoustic resonator) 듀플렉서(duplexer) 모듈(module)을 제시하였다. FBAR 소자는 일반적인 실리콘(Si) 기반의 공정보다 가격경쟁력이 우수한 유리(glass) 웨이퍼 기반의 패키지를 개발하여 적용하였다. FBAR 듀플렉서 모듈의 전송단(Tx)과 수신단(Rx)에서 얻어진 최대 삽입손실 특성은 각각 1.9 dB와 2.4 dB이다. 전송단 및 수신단 FBAR 소자와 본딩(bonding)된 유리 기반의 웨이퍼 및 PCB 기판과 몰딩(molding) 물질을 모두 포함하는 FBAR 듀플렉서 모듈의 전체 두께는 1.2 mm이다.

• 한국정보통신학회논문지
• /
• 제14권2호
• /
• pp.312-320
• /
• 2010

현재 운영 중인 대부분의 온라인 모니터링 시스템은 유선망과 근거리 무선망 중심으로 데이터 프로토콜 변환 동기화, 측정 장치의 유연한 운용 요구, 유지보수 등 관리 비용의 증가를 발생시킨다. 따라서 이런 문제점을 해결하기 위해 본 논문에서는 유무선 통신망과 효과적으로 연동 운용 가능한 CDMA 통신망 기반의 환정정보 모니터링 시스템 구축방안과 특히, 복수개의 자료수집 장치에 대해 효과적인 운용이 가능한 SMS 데이터 송수신 프로토콜을 제안한다. 그리고 제안된 프로토콜의 운용성과 안전성을 입증하고 SMS를 이용한 데이터 전송 및 운용 효율성을 분석한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1818-1820
• /
• 2003

In this study, we developed friendly-environment device through various applications of pulse power system and studied research about pulse energy transfer characteristics. We have studied the mutual relation between characteristics of the load impedance and consumed power of the pulse power system. The consumed power means electrical power from the wall plug. For changing the load impedance, we could change elecrode length. As results, we can get electrical characteristics between pulse generator and load. When the pulse energy was triggered the microbes, caused waste water, they were almost removed in the waste water.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.209-211
• /
• 2004

In the Langmuir-Boldgett(LB) technique, a monolayer on the water surface is transferred on to a substrate, which is raised and dipped through the surface, and one can obtain multilayers in which constituent molecules periodically are arranged in layer. The LB technique has attracted considerable interest in the fabrication of electrical and electronic device, e.g.. Many researchers have investigated the electrical properties of monolayer and multiplayer films. Dendrimers represent a new class of synthetic macromolecules sharacterized by a regularly branched treelike structure. Multiple branching yields a large number of chain ends, which distinguishes dendrimers from conventional starlike polymers and microgels. Azobenzene dendrimer is one of the dendritic macromolecules that includes the azo-group which exhibits a photochromic character. Due to the presence of the charge transfer part, the azo-group, and having a rod-shaped structure, these compounds are expected to have the potential interest in electronics and ptoelectronics, especially in nonlinear optics. In the present paper, we give a pressure stimulation into organic thin films and detect the induced displacement current.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2016-2020
• /
• 2010

Indium-zinc-oxide (IZO) films were deposited at room temperature via RF sputtering with varying the flow rate of additive nitrogen gas ($N_2$). Thin film transistors (TFTs) with an inverted staggered configuration were fabricated by employing the various IZO films, such as $N_2$-added and pure (i.e., w/o $N_2$-added), as active channel layers. For all the deposited IZO films, effects of additive $N_2$ gas on their deposition rates, electrical resistivities, optical transmittances and bandgaps, and chemical structures were extensively investigated. Transfer characteristics of the IZO-based TFTs were measured and characterized in terms of the flow rate of additive $N_2$ gas. The experimental results indicated that the transistor action occurred when the $N_2$-added (with $N_2$ flow rate of 0.4-1.0 sccm) IZO films were used as the active layer, in contrast to the case of using the pure IZO film.

• 센서학회지
• /
• 제13권1호
• /
• pp.20-26
• /
• 2004

For the disabled persons who can't use their limbs, motorized wheelchair that is activated by voice recognition module employing speaker independent method, was implemented. The wireless voice transfer device was designed and employed for the user convenience. And the wheelchair was designed to operate using voice and keypad by selection of the user because they can manipulate it using keypad if necessary. The speaker independent method was used as the voice recognition module in order that anyone can manipulate the wheelchair in case of assistance. Using the implemented wheelchair, performance and motion of the system was examined and it has over than 97% of voice recognition rate and proper movements.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.893-898
• /
• 2014

Recently, the interior permanent synchronous motor (IPMSM) has been applied to an integrated starter and generator (ISG) for hybrid electric vehicles. In the design of such a motor, thermal analysis is necessary to maximize the power density because the loss is proportional to the power of a motor. Therefore, a cooling device as a heat sink is required internally. Generally, a cooling system designed with a water jacket structure is widely used for electric motors because it has advantages of simple structure and cooling effectiveness. An effective approach to analyze an electric machine with a water jacket is a thermal equivalent network. This network is composed of thermal resistance, a heat source, and thermal capacitance that consider the conduction, convection, and radiation. In particular, modeling of the cooling channel in a network is challenging owing to the flow of the coolant. In this paper, temperature prediction using a thermal equivalent network is performed in an ISG that has a water cooled system. Then, an experiment is conducted to verify the thermal equivalent network.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권2호
• /
• pp.41-46
• /
• 2015

컴퓨터 사용 환경이 모바일 시장 및 소형 전자기기 시장 등으로 다양해짐에 따라 저전력 고성능 시스템에 대한 요구도 커지고 있다. 3차원 die-stacking 기술은 한정된 공간에서 DRAM의 집적도과 접근 속도를 높여 차세대 공정방식으로 많은 연구가 되고 있다. 이 논문에서는 3차원 구조의 DRAM 로직층에 재구성형 가속기를 구현하여 저전력 고성능 시스템을 구성하는 방법을 제안한다. 또한 재구성형 가속기의 지역 메모리로 캐시를 적용하고 활용하는 방법에 대해서 논의한다. DRAM의 로직층에 재구성형 가속기를 구현할 경우 위치적인 특성으로 데이터 전송 및 관리에 필요한 비용이 줄어들어 성능을 크게 향상시킬 수 있다. 제안된 시스템에서는 최대 24.8의 스피드업을 기록하였다.

• Journal of Information Processing Systems
• /
• 제14권1호
• /
• pp.270-279
• /
• 2018

PCI Express (PCIe) bus, which was only used as an internal I/O bus of a computer system, has expanded its function to outside of a system, with progress of PCIe switching processor. In particular, advanced features of PCIe switching processor enable PCIe bus to serve as an interconnection network as well as connecting external devices. As PCIe switching processors more advanced, it is required to consider the different adapter card architecture. This study developed multipurpose adapter cards by applying an on-board optical module, a latest optical communications element, in order to improve transfer distance and utilization. The performance evaluation confirmed that the new adapter cards with long cable can provide the same bandwidth as that of the existing adapter cards with short copper cable.