• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1079-1081
• /
• 1999

This paper presents the standard for dividing/tieing the distribution lines and installing optimally the automated distribution switch-gear in multi-line faults. Also this paper recommends the distribution system design in consideration of the live load transfer of the concentrated load in the last load-side. This recommendation will be useful for designing the distribution network, developing the feeder automation software and operating the distribution automation system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2883-2885
• /
• 2000

ATS(Automatic Transfer Switch), the secondary power supply system prepared for' temporary power fail on main in KEPCO in industrial field or running a important system. is developed. In this development, we prove that the proposed system is safe with results in a few environment testing focused on a solution against a poor environment by making virtual environment for a solution on problems of system reliability to switch more safely.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.330-334
• /
• 2004

A new SEPIC-Flyback converter is proposed. The proposed converter is the integration of SEPIC and Flyback converter. Not only SEPIC output but also Flyback output could be fully regulated by constant frequency PWM control. Merged SEPIC and Flyback topology can share the transformer and power MOSFET. When the switch turns on, one topology operates via capacitive energy transfer. The other topology acts as inductive energy transfer while the switch is off. So, it can increase power density per one cycle. The experimental result is presented and verified.

• 대한산업공학회지
• /
• 제19권1호
• /
• pp.47-59
• /
• 1993

Recently, Broadband ISDN(B-ISDN) has received increased attention as a communication architecture which can support multimedia applications. Also, Asynchronous Transfer Mode(ATM) is considered as a promising technique to transfer and switch various kinds of media, such as telephone speech, data and motion video. Comparisons among a variety of ATM switching systems which have already been proposed will provide quite useful information for the new ATM switching system design. To facilitate the comparison, we introduce the design requirements and classification criteria for the ATM switch, and propose a performance analysis model for the Banyan network which is the basic switching fabric of most multi-stage ATM switching systems. The model is based on the standard discrete-time Markov chain analysis and can be conveniently used for extensive Banyan network analysis. The computational results are also presented.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1681-1688
• /
• 2009

This paper proposes a new fault restoration method which adopts the recloser as top agent to release the problems of the data concentration and fault processing delay of the existing DAS(distribution Automation System) under the ubiquitous distribution system. In proposed method, top agent collects the data based on the multi-casting communication with the tie switches of the interconnection point, and then selects a closed switch(tie switch) to transfer the sound outage load to other feeders based on the heuristic search strategy step by step until the load transfer work is finished. Here, a new heuristic rule is developed which can guarantee the relational load balancing and line loss from the collected voltage data. Finally, the several faults are simulated for typical multi-section and multi-interconnection distribution system to prove the effectiveness of the proposed strategy, in particular, for each simulation cases, the load balancing index and line loss index of the obtained solution from the proposed method is compared with those of all of feasible solutions.

• 대한전자공학회논문지SD
• /
• 제41권10호
• /
• pp.51-56
• /
• 2004

광소자의 재료물질로서 특성이 우수하며 열광학계수가 큰 silicon을 기반으로 한 SOI (Silicon-on-insulator)를 사용하여 열광학 1×2 광스위치를 제안, 제작하였다. SOI wafer는 도파로가 형성될 상위 Si 층(n=3.5)과 클래딩 영역이 될 산화막 매립층(n=1.5) 그리고 기판인 Si인 3층으로 이루어진다. BPM(Beam propagation method) 전산모의를 통해 20dB 이상의 누화특성을 갖는 단일모드의 1×2 비대칭 y-분기 광도파로를 형성하고, 열확산 전산모의를 통해 금속열선을 설계 제작하였다. 제작된 광스위치는 약 3.5 watts의 구동 전력에서 20dB 이상의 채널간 누화가 측정되었다.

• 한국정보과학회논문지:정보통신
• /
• 제32권2호
• /
• pp.244-253
• /
• 2005

본 논문에서는, n개의 입출력 포트를 가진 스위치로 구성된 스위치 라우터의 성능 예측 모형을 제안하고, 스위치에 장착된 버퍼의 개수 증가에 따른 성능 향상 추이를 분석하였다. Buffered 스위치기법은 크로스바 스위치 내부의 데이타 충돌 문제를 효과적으로 해결할 수 있는 방법으로 널리 알려져 있다. 제안한 성능 예측 모형은 먼저 네트워크 내부임의 스위치 입력 단에 유입되는 데이타 패킷이 스위치 내부에서 전송되는 유형을 확률적으로 분석하여 수립되었다. 제안한 모형은 스위치에 장착된 버퍼의 개수와 무관하게 출력 버퍼를 장착한 스위치의 성능, 즉 네트워크 성능 평가의 두 가지 주요 요소인 네트워크 정상상태 처리율(Normalized Throughput, NT)과 네트워크 지연시간(Network Delay)의 예측이 가능하고, 나아가서 이들로 구성된 네트워크의 성능 분석에 적용이 용이하다. 제안한 수학적 성능 분석 연구의 실효성 검증을 위하여 병행된 시뮬레이션 결과는 상호 미세한 오차 범위 내에서 모형의 예측 데이타와 일치하는 결과를 보여 분석 모형의 타당성을 입증하였다. 또한, 분석 결과 스위치 내부에 많은 버퍼를 장착할수록 정상상태 처리율의 증가율은 감소하고, 네트워크 지연시간은 증가하는 것으로 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1656-1663
• /
• 2016

A capacitive wireless power transfer (C-WPT) system uses an electric field to transmit power through a physical isolation barrier which forms a pair of ac link capacitors between the metal plates. However, the physical dimension and low dielectric constant of the interface medium severely limit the effective link capacitance to a level comparable to the main switch output capacitance of the transmitting circuit, which thus narrows the soft-switching range in the light load condition. Moreover, by fundamental limit analysis, it can be proved that such a low link capacitance increases operating frequency and capacitor voltage stress in the full load condition. In order to handle these problems, this paper investigates optimal design of double matching transformer networks for C-WPT. Using mathematical analysis with fundamental harmonic approximation, a design guideline is presented to avoid unnecessarily high frequency operation, to suppress the voltage stress on the link capacitors, and to achieve wide ZVS range even with low link capacitance. Simulation and hardware implementation are performed on a 5-W prototype system equipped with a 256-pF link capacitance and a 200-pF switch output capacitance. Results show that the proposed scheme ensures zero-voltage-switching from full load to 10% load, and the switching frequency and the link capacitor voltage stress are kept below 250 kHz and 452 V, respectively, in the full load condition.

• 한국정밀공학회지
• /
• 제30권11호
• /
• pp.1187-1192
• /
• 2013

In the case of 4 wheel drive (4-WD) type car, power switching occurs to 4-WD by operating lever or switch that operates power switching device attached in transfer case which can operate motor by electric signal. So if the RPM of motor is high, power switching will not exactly occur and can cause damage to gear in transfer case according to circumstances. So in this study, we applied 2 level of planet gear type motor spindle of motor drive part of a power train. And conducted decelerating to increase torque to switch power safe and accurately. Also, we researched efficiency of gear by designing reduction gear ratio and gear type and by calculating contact stress and bending strength. Based on researched content, we made drive head of power switching device and a reduction module which uses type that uses motor spindle as sun gear and ring gear as cover.

• 한국통신학회논문지
• /
• 제21권3호
• /
• pp.629-642
• /
• 1996

ATM switch handles the traffic for a wide range of appliations with different QOS(Quality-of-Service) requirements. In ATM switch, the priority control mechanism is needed to improve effectively the required QOS requirements. In this paper, we propose a priority control mechanism using the cell transfer ratio type and discard threshold in order to archive the cell loss probability requirement and the delay requirement of each service class. The service classes of our concern are the service class with high time priority(class 1) and the service class with high loss priority control mechanism, cells for two kind of service classes are stored and processed within one buffer. In case cells are stored in the buffer, cells for class 2 are allocated in the stored and processed within one buffer. In case cells are stored in the buffer, cells for class 2 are allocated in the shole range of the buffer and cells for class 1 are allocated up to discard threshold of the buffer. In case cells in the buffer are transmitted, one cell for class 1 is transmitted whenever the maximum K cells for class 2 are transmitted consecutively. We analyze the time delay and the loss probability for each class of traffic using Markov chain. The results show that the characteristics of the mean cell delay about cells for class 1 becomes better and that of the cell loss probability about cells for class 2 becomes better by selecting properly discard threshold of the buffer and the cell transfer ratio according to the condition of input traffic.