• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.111-116
• /
• 2006

정부는 BTL(Build-Transfer-Lease)사업으로 교육시설 분야에 2005년부터 3년간 13조원의 재원을 투여하여 교육시설을 획기적으로 개선하겠다고 발표하였으며, 현재 각 지역교육청별로 교육시설물에 대한 BTL 사업을 지속적으로 발주하고 있는 추세이다. 이에 본 연구에서는 교육시설물에 대한 현행 BTL 사업 적격성 평가방식의 효율성 제고를 위해 객관적이며 효율적으로 정량적 VFM 분석을 실시할 수 있는 BTL 사업 적격성 평가 시스템의 핵심 모듈을 제안하였으며, 이를 통해 명확한 BTL 사업수행 비용에 대한 예측 및 적격성 평가방식의 도입을 위한 기초자료를 제시하고자 한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.100.2-100.2
• /
• 2012

Surface texturing of crystalline silicon is carried out in alkaline solutions for anisotropic etching that leads to random pyramids of about $10{\mu}m$ in size. Recently textured pyramids size gradually reduced using new solution. In this paper, we investigated that texture pyramids size had an impact on emitter property and front electrode (Ag) contact. To make small (${\sim}3{\mu}m$) and large (${\sim}10{\mu}m$) pyramids size, texturing times control and one side texturing using a silicon nitride film were carried out. Then formation and quality of POCl3-diffused n+ emitter in furnace compare with small and large pyramids by using SEM images, simulation (SILVACO, Athena module) and emitter saturation current density (J0e). After metallization, Ag contact resistance was measured by transfer length method (TLM) pattern. And surface distributions of Ag crystallites were observed by SEM images. Also, performance of cell which is fabricated by screen-printed solar cells is compared by light I-V.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권6호
• /
• pp.316-323
• /
• 2004

This paper develops an ADWHM(Advanced Digital Watt-Hour Meter) which integrates and implements the voltage management data record function and the load management data record function in the electronic watt-hour meter. ADWHM is developed based on PIC16F874 which is 8bit micro-controller of RISK type for the easy of programing and maintenance, and electronic power signal processing module is located at front of it to reduce the computing load of processor. Also, a 16kbyte EEPROM is used to record the voltage management data and load management data for a week as well as watt-hour data and USART communication mode is used to transfer data from ADWHM to PC. The accuracy of the voltage and unt measuring for ADWHM is verified by identifying the LCD display values of the ADWHM after the voltage signals of id levels from digital function generator is applied to PT(Potential Transformer) and CT(Current Transformer) output under state which it is separated from real power line. On the its basic functions such as watt-hour data recording function, voltage management data recording function and load management data recording function was verified by showing data for three days among the collected data to PC by RS232C communication from ADWHM which was connected to real power lines for a week.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.57-63
• /
• 2015

Recently, LED is widely used in the kinds of display devices or lighting. In this paper, we fabricated LED chamber light for naval vessels to replace to conventional chamber light using incandescent lamp. The LED package of chamber light was designed with luminous intensity of 5.5 cd, color temperature of $6,000{\pm}500K$, forward voltage of 3~3.2 V and input current of 60 mA. A LED module was composed of 36 LED packages and metal PCB. The VF and luminous intensity of LED package were getting down when temperature increased. The temperature of LED chamber light was measured by changing the number of LED package and applied current for one hour when an electric current flow. The heat transfer capability have been improved by using metal PCB. The power consumption of LED chamber light reduced by 86% compared to the conventional chamber light using incandescent lamp.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.53-56
• /
• 2001

최근 무선 인터넷의 이용이 급격히 증가하고 있을 뿐만 아니가 사용사의 요구도 텍스트 기반의 무선 인터넷 데이터 서비스에서 그릴, 사운드, 영상 등의 무선 멀티미디어 데이터 서비스로 변하고 있다. 이러한 흐름에 따라, 본 논문에서는 기존에 많이 사용되는 무선 인터넷 프로토콜인 WAP(Wireless Application Protocol) 기반의 무선 인터넷 환경에서 어디서든지 원격지의 영상 이미지를 모니터링 할 수 있는 시스템을 제안하였고, 이는 기존의 고가의 인터넷 카메라 시스템과는 달리, 인터넷에 직접 연결 가능한 비디오 모듈과 PC로 구축된 서버를 사용한 저가의 효율적인 모니터링 시스템이다. 본 논문에서는 이러한 WAP 기반의 원격 화상 모니터링 시스템에 대한 설계와 구현 방법에 대해 서술하였다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1218-1225
• /
• 2016

The avionic battery discharge regulator (BDR) plays an important role in a power-conditioning unit. With its merits of high efficiency, stable transfer function, and continuous input and output currents, the non-isolated Weinberg converter (NIWC) is suitable for avionic BDR. An improved peak current control strategy is proposed to achieve high current-sharing accuracy. Current and voltage regulators are designed based on a small signal model of a three-module NIWC system. The system with the designed regulators operates stably under any condition and achieves excellent transient response and current-sharing accuracy.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.971-976
• /
• 2012

A 150 kJ compact capacitive pulsed power system (CCPPS) capable of delivering electrical energy into an electrothermal chemical (ETC) gun on a vehicle has been studied. The CCPPS provides pulsed electrical energy into a capillary plasma injector which generates plasma of tens of thousands $^{\circ}K$ in temperature and has a nonlinear resistance depending on the current. The design requirements of the CCPPS are as follows: the maximum power of 250 MW, the pulse width of about 0.6 ms, the volume of no more than 0.5 cubic meter, the efficiency of energy transfer over 80 % and the repetition rate of 4~5 times per minute. The constructed CCPPS is composed of four 37.5 kJ capacitor bank modules in parallel to make a trapezoid pulse shape and to satisfy the design requirements. Each module is designed to achieve high reliability, safety, efficiency and energy density to endure severe operating conditions. The results of the performance test on the CCPPS using a 120 mm ETC gun are described.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.187-191
• /
• 2003

이 연구는 전자해도(ENC) 데이터를 이용한 현실감 있는 3차원 해상환경 데이터베이스를 제작하는 방법에 관한 것이다. 종이해도로부터 해안선, 등심선, 수심 및 항로표지와 같은 정보를 수작업으로 digitizing해서 얻는 기존의 방법에 비해, 본 연구에서 제안하는 방법은 각종 정보를 전자해도 데이터로부터 직접 얻을 수 있기 때문에 기존의 방법보다 손쉬고 정확하게 해상환경 데이터베이스를 제작할 수 있다. 또한 국제수로기구(IHO)의 표준규격(S-57)에 따라 제작되어 전 세계적으로 통일된 규격을 가지고 있는 전자해도 데이터를 이용함으로써 국내 및 외국항에 대한 데이터베이스를 정확하게 제작할 수 있으며, 해상환경 데이터베이스 제작 이외에도 해도의 경ㆍ위도 정보를 사용하는 여러 연구 분야에 유용하게 사용될 것으로 판단된다.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1424-1429
• /
• 2007

This paper presents a simple and reliable one-touch type multi-immunosensing lab-on-a-chip (LOC) detecting antibodies as multi-disease markers using electrochemical method suitable for a portable point-of-care system (POCS). The multi-stacked LOC consists of a PDMS space layer for liquids loading, a PDMS valve layer with 50 im in height for the membrane, a PDMS channel layer for the fluid paths, and a glass layer for multi electrodes. For the disposable immunoassay which needs sequential flow control of sample and buffer liquids according to the designed strategies, reliable and easy-controlled on-chip operation mechanisms without any electric power are necessary. The driving forces of sequential liquids transfer are the capillary attraction force and the pneumatic pressure generated by air bladder push. These passive fluid transport mechanisms are suitable for single-use LOC module. Prior to the application of detection of the antibody as a disease marker, the model experiments were performed with anti-DNP antibody and anti-biotin antibody as target analytes. The flow test results demonstrate that we can control the fluid flow easily by using the capillary stop valve and the PDMS check valves. By the model tests, we confirmed that the proposed LOC is easily applicable to the bioanalytic immunosensors using bioelectrocatalysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.469-470
• /
• 2006

The purpose of this research was to investigate and to find out the optimal annealing condition to mold an aspheric glass to be used for mobile phone module having 2 megapixel and $2.5{\times}$ zoom. Taking annealing rate and re-press temperature after molding as molding variables under the identical molding temperature and pressure, a glass lens was molded. And, Form Accuracy, Lens Thickness, Refractive Index, and Modulation Transfer Function(MTF) were measured in order to observe characteristics of molded lens, and then optimal annealing conditions were determined based on the resulting data. Properties of lens molded under the optimal conditions revealed Form Accuracy[PV] $0.2047\;{\mu}m$ in aspheric surface, and $0.2229\;{\mu}m$ in plane, and MTF value was 30.3 % under 80 lp/mm.