Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

150 kJ Compact Capacitive Pulsed Power System for an Electrothermal Chemical Gun

  • Received : 2011.11.14
  • Accepted : 2012.07.02
  • Published : 2012.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

A 150 kJ compact capacitive pulsed power system (CCPPS) capable of delivering electrical energy into an electrothermal chemical (ETC) gun on a vehicle has been studied. The CCPPS provides pulsed electrical energy into a capillary plasma injector which generates plasma of tens of thousands $^{\circ}K$ in temperature and has a nonlinear resistance depending on the current. The design requirements of the CCPPS are as follows: the maximum power of 250 MW, the pulse width of about 0.6 ms, the volume of no more than 0.5 cubic meter, the efficiency of energy transfer over 80 % and the repetition rate of 4~5 times per minute. The constructed CCPPS is composed of four 37.5 kJ capacitor bank modules in parallel to make a trapezoid pulse shape and to satisfy the design requirements. Each module is designed to achieve high reliability, safety, efficiency and energy density to endure severe operating conditions. The results of the performance test on the CCPPS using a 120 mm ETC gun are described.

Keywords

References

  1. J.W. Jung, S.H. Kim and K.S. Yang, "Overview of ETC Research in Korea," IEEE Trans. Magnetics, Vol. 39, No. 1, pp. 22-23, Jan. 2003. https://doi.org/10.1109/TMAG.2002.805918
  2. S.H. Kim, K.S. Yang, Y.H. Lee, J.S. Kim and B.H. Lee, "Electrothermal-Chemical Ignition Research on 120- mm Gun in Korea," IEEE Trans. Magnetics, Vol. 45, No. 1, pp. 341-346, Jan. 2009. https://doi.org/10.1109/TMAG.2008.2008415
  3. Y.S. Jin, H.S. Lee, G.H. Rim, J.S. Kim, J.S. Kim, J.H. Chu, J.S. Jung and D.W. Hwang, "Design and Performance of a 300 kJ Pulsed Power Module for ETC Application," IEEE Trans. Magnetics, Vol. 37, No. 1, pp. 165-168, Jan. 2001. https://doi.org/10.1109/20.911813
  4. G.Y. Sung, J.S. Kim, J.H. Chu and J.W. Jung, "Development of 2.4-MJ Capacitor Bank for Electrothermal Propulsion Technology," IEEE Trans. Plasma Science, Vol. 30, No. 5, pp. 1789-1792, Oct. 2002. https://doi.org/10.1109/TPS.2002.805421
  5. J.S. Kim, Y.H. Choi, J.H. Chu and G.Y. Sung, "Analysis on High Surge Voltages Generated in Paralleled Capacitor Banks," IEEE Trans. Magnetics, Vol. 39, No. 1, pp. 422-426, Jan. 2003. https://doi.org/10.1109/TMAG.2002.806401
  6. S.H. Kim, K.S. Yang, J.S. Kim, And Y.H Lee, "Comparison of Plastic Ablation Materials of Capillary Discharge," in Proceedings of 16th IEEE International Pulsed Power Conference, Albuquerque, New Mexico, 2007.

Cited by

  1. Operation of a 2.4-MJ Pulsed Power System for Railgun vol.42, pp.10, 2014, https://doi.org/10.1109/TPS.2013.2295225