• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.12-22
• /
• 2010

The variable message sign(VMS) is a facility to smoothen traffic flows and enable safe passing by providing real-time necessary information on roads, weather, transportation, and traffic regulations. The VMS also solves a feeling of uneasiness and gives a sense of psychological security by providing information to drivers. However, the VMS has a strong character of being a non-market product but a public product, so it has not normally been evaluated for its value. This research has evaluated a value of satisfaction level for traffic information users, using a contingent valuation method(CVM). As a result of evaluating the value of satisfaction level for users through division into an urban roadway and an urban highway for the cities where an intelligent transportation system(ITS) has been established, the urban highway had a value of 96.7 won/system and the urban roadway had a value of 76.3 won/system.

• International Journal of Highway Engineering
• /
• v.19 no.5
• /
• pp.163-171
• /
• 2017

PURPOSES : Traffic safety facilities are used to prevent traffic accidents before they occur by providing drivers with information on traffic situations and the geometric design of roads. However, some facilities not defined in guidelines do not meet installation criteria, yet are being installed and used in order to increase efficiency in traffic flow and prevent traffic accidents in a specific expressway zone. In this study, we have evaluated the effect of delineation system which are not defined in the guideline criteria. METHODS : Different virtual scenarios were created for roads using expressway median barrier chevron signs, with a driving simulator used to evaluate the installation and operational effect of such signs. Ten experiments were performed with left- and right-curved roads at curve radius intervals of 500 m, from 500 m to 2,500 m. RESULTS : For sections with a curve radius of more than 1,500 m, drivers had a clear tendency toward stable driving regardless of delineation system. When a chevron sign is installed on a protection fence in the road curving left, an expanded installation is recommended up to the section with a curve radius of 1,000 m. According to the analysis results for the RHB (Relative High Beta spectrum), driving concentration also improved up to a curve radius of 1,000 m. CONCLUSIONS :The experiment result indicates the extent of biasing within a lane and the manipulation amount of steering handle, were analyzed and found to be affected by curve radius and road alignment regardless of delineation system.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.470-477
• /
• 2015

VMS informs the public of traffic and weather information in real time and functions to facilitate traffic flow. However, as smart phone navigation becomes more popular with the rapid propagation of the smart phone, the efficiency and applicability of VMS are challenged. Accordingly, this study aims to investigate the drivers' preference for the traffic information service between VMS and smart phone navigation by conducting a survey using a stated preference in Busan Metropolitan City in August 2013. This study found that 60% of survey respondents prefer VMS to the smart phone navigation. Further analysis to investigate the preference focused on the smart phone users revealed that female, younger, more educated, and less experienced drivers more rely on the smart phone navigation. Consequently, this study implicates that private and governmental institutes have to take a measure to develop the integrated traffic information system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.66-73
• /
• 2006

Safety is the most important for all traffic management and control technology. This paper focuses on developing a flexible, reliable and real-time processing algorithm which is able to generate signal for the entering vehicle at the joining road through a camera and image processing technique. The images obtained from the camera located beside and upon the road can be used for traffic surveillance, the vehicle's travel speed measurement, predicted arriving time in joining area between main road and joining road. And the proposed algorithm displays the confluence safety signal with red, blue and yellow color sign. The three methods are used to detect the vehicle which is driving in setted detecting area. The first method is the gray scale normalized correlation algorithm, and the second is the edge magnitude ratio changing algorithm, and the third is the average intensity changing algorithm The real-time prototype confluence safety signal generation algorithm is implemented on stored digital image sequences of real traffic state and a program with good experimental results.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.91-102
• /
• 1999

The objective of this study is to evaluate traffic management strategies using Variable Message Signs(MCS) on urban freeways. It is well known that real-time information on traffic conditions increases driver's comfort, and reduces the risks of accidents if drivers are aware of the traffic situation in advance, they decide whether to divert from the freeway or continue on the planned route. The experimental data collected on the Olympic highway we have shown the following results : 1. when the information on both the congested freeway and uncontested diversion route is displayed on the variable message sign. an additional 1.7 percent of traffic diverted, which results in a 3.7 percent reduction in total travel time. 2 Compared with one Proposed VMS message of 'reduce the speed', the other Proposed VMS message of 'keep speed 70km/h' is found to be much more effective in reducing mean speed.

• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.101-112
• /
• 2009

Recently, with the existing speed-management by law enforcements and physical speed-reduction facilities, the country newly adopted Driver Feedback Sign (DFS) system, which displays driving speed in order to guide the driver to an advisable driving condition. DFS is mainly used in school zones due to reasons related to the ITS. Accordingly, because it is predictable that DFS will result in speed-reduction without legal forces and would have an effect on physical speed-reduction facilities, intersection, crosswalks, and road-alignments, this study will try to verify the efficiency of DFS by researching the vehicle speed in national highways and school zones, which have similar conditions to the urban arterial road. In consequence, on national highways, the drivers had a tendency to travel according to the road-environment such as urban arterial road and not reduce speed voluntarily. In school zones, drivers tend to reduce speed in mornings and afternoons when children travel to school or home, showing that the resulting effect is different according to the road-environment where DFS is installed, and the time slot of the DFS.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.4
• /
• pp.26-30
• /
• 2015

Exceeding the speed limit during vehicle driving is a key factor in the severity of lots of road accidents, and SLIF(Speed Limit Information Function) application is in the initial phase in Korea. SLIF helps the drivers to observe a speed limit when they are driving by providing alert and informing the current limit speed information based on external data using camera and/or digital map, for that reason, environmental conditions could be causes of SLIF malfunctions. In this study, design adequacy analysis of SLIF in respect of false recognition as the Korea traffic environment has been performed. As tentative results, road conditions and structure of speed limit sign as well as system performance often caused misrecognition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.42-52
• /
• 2013

In this study, value of VMS (Variable Message Sign) traffic information is estimated by using CVM (Contingent Valuation Method), which is developed to quantify the value of non-marketable goods in environmental economics. CVM is used to estimate the value of goods provided by a project under consideration and then the project feasibility can be indirectly examined on the basis of the estimated value. This study focuses on estimating to estimate value of traffic information provided through VMS, a part of the transportation system enhancement project by Korea Expressway Corporation which is aimed at mitigating traffic problems on expressways. In particular, this study analyzes value of information separately by trip purpose, information type, and traffic flow condition. A state preference survey was designed to estimate the value of non-marketable traffic information. To maximize reliability of the survey results, a pilot survey was taken before the main survey. The open-ended question method was adopted in capturing users' willingness-to-pay. Both Tobit and binary Probit models were applied in estimating the value of VMS traffic information and their parameters were estimated using the maximum likelihood estimation. The estimation results suggests that the value of traffic information perceived by users is 518.28 KRW.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.91-98
• /
• 2014

PURPOSES : This study is to develop a automate road mapping system using ARASEO(Automated Road Analysis and Safety Evaluation TOol) for road management. METHODS : The road survey van named ARASEO(Automated Road Analysis and Safety Evaluation TOol) was used to generate highway drawings for Korea National Road number 37 automatically. In order to generate the highway drawings for purpose of road management, it is required to acquired the information for highway alignment, road width and road facilities such as safety barrier and road sign. Therefore the survey van acquired and analyzed the road width, median and guardrail data using rear side laser sensor of ARASEO and recognized the traffic control sign and chevron sign using foreside camera images. Also the highway alignment which is the basic information for highway drawing can be analyzed by acquisition the every 1m positional and attitude data using GPU and IMU sensor and developed algorithm. Finally, in this research the CAD based drawing software was developed to draw highway drawing using the analysis result from ARASEO. RESULTS : This study showed the comparison result of the surveyed road width and drawing data. To make the drawing of the road, we made the Autocad ARX program witch run in CAD menu interface. CONCLUSIONS : Using this program we can create the road center line, every 500m horizontal and vertical ground plan drawing automatically.

• The Journal of the Korea Contents Association
• /
• v.15 no.8
• /
• pp.69-76
• /
• 2015

With Various signs are installed at roadside to display the message which rather confuse the drivers. The technologies using advanced lighting system and LED have improved the visibility at nighttime but the problems with plural signs have yet to be resolved. In order to solve this problem, LED and the prismatic variable message sign have been applied. But, they have been provided limited information by the display limit. This research conducted to study patent and technical trend of the existing variable message signs to understand the present technology. And, we suggested next generation display to improve providing information. Therefore, we conducted to compare the LED and the OLED by technical and economical literature review. Also, this research conducted test of luminance contrast about the LED and the OLED display in order to understand the possibility of replacing road signs.