• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.700-706
• /
• 2003

This paper presents a 3D last design system that provides the 3-dimensional last data based on the FFD(Free Form Deformation) method. The proposed system utilizes the control points for deformation factor to convert from the 3D point cloud foot data to the 3D point cloud last data. The deformation factor of the FFD is obtained from the conventional last design technique, and constructed on the FFD lattice based on the bottom view and lateral view of the measured 3D point cloud foot data. In addition, the control points of FFD lattice is decided on the anatomical points of foot. The deformed 3D last obtained from the proposed FFD is saved as a 3D dxf foot data. The experimental results demonstrate that the proposed system have the descent 3D last data based on the openGL window.

• 한국측량학회지
• /
• 제16권1호
• /
• pp.41-50
• /
• 1998

수치화된 영상에 의해서 대상물에 대한 위치정보를 취득하면 자료의 처리 및 저장, 갱신이 매우 용이하다. 위성을 이용한 위치결정체계인 GPS는 전 세계 어디에서나 3차원 좌표를 쉽게 얻을 수 있다는 장점 때문에 여러 분야에서 그 효용성이 증대하고 있다. 공간상에 존재하는 대상물에 대한 위치정보를 효율적으로 취득하기 위해서는 수치사진측량의 자동화가 이루어져야 하며 자료취득과 처리과정이 실시간적으로 수행되어야 한다. 본 연구에서는 수치사진측량공정의 자동화를 위한 프로그램을 개발하였으며, CCD 사진기와 GPS 수신기를 장착한 이동차량을 제작함으로써 이동용 위치결정체계를 구축하였다. 또한 CCD 사진기의 좌ㆍ우측 정지영상과 GPS를 이용하여 지면에 대해 수직인 20개의 대상물에 대한 3차원 위치결정을 실시하였으며, 실시간 사진측량을 위한 기초 연구로서 동영상과 GPS를 이용하여 대상물에 대한 3차원 위치결정을 수행하고 정확도를 분석하였다.

• 구강회복응용과학지
• /
• 제36권3호
• /
• pp.196-202
• /
• 2020

최근 three-dimensional (3D) printed denture가 완전 무치악 환자의 보철치료 시 선택할 수 있는 하나의 제작 방법으로 주목을 받고 있다. 그러나 아직까지 건강보험 총의치가 3D 프린팅 활용을 지원하지 않기 때문에 전통적인 방식만을 사용해야만 하며, 재제작이 필요할 경우 처음부터 제작과정을 반복해야 한다는 단점이 있다. 그러나 통상적인 의치 제작 과정 중 특정 단계들의 정보를 디지털 스캔하여 저장할 수 있고, 본 증례에서는 이 정보를 활용하여 통상적인 방식으로 제작된 첫번째 의치의 문제점을 보완한 새로운 의치를 3D 프린팅으로 완성하였다.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.334-340
• /
• 2020

Purpose: This study aimed to compare three-dimensional adaptation with the rinsing time of the temporary crown produced using the digital light processing method. Methods: The maxillary right first molar abutment was scanned with a dental scanner. A temporary crown was designed with the scanned abutment. The designed crown was made of 10 temporary crowns using a digital light processing printer. The crowns were divided into the 5-minute and 10-minute rinsing groups; 5 temporary crown washes were performed for each group. In order to obtain the internal data, each group was scanned for a temporary crown. The three-dimensional fit was measured by superimposing the scanned internal surface data and the abutment data. The average comparison of three-dimensional adaptation was analyzed using the Mann-Whitney U test. Results: The 5-minute rinsing group showed a significantly higher adaptation of 71.42±3.08 ㎛ as compared to the 10-minute rinsing group (67.52±0.92 ㎛) (p<0.05). Conclusion: When making a temporary crown with a digital light processing method, a rinsing time of 10 minutes is appropriate.

• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.495-503
• /
• 2020

This study classified lower body shape according to thigh and waist shape to improve the fit of skinny blue jeans in adult women in their 20s. We analyzed the three-dimensional automatic measurement data, three-dimensional indirect measurement data, and index data using the three-dimensional female (20-29 years old) body scan data provided by Size Korea (6^th Korean Human Dimensional Survey Project). Factor analysis was performed to classify body type. We selected and analyzed 34 items related to thigh shape based on index items, angle items, and protrusion amount items from 99 items; consequently, seven factors were extracted and 82.39% of the total variance was explained. Cluster analysis according to factor analysis classified it into 4 types, and a post-test Duncan test was conducted to classify thigh features according to classified types. As a result, the characteristics of lower body shape according to the thigh types of women in their 20s are as follows. Lower Body Type 1 is shape with a more prominent belly and less prominent thighs. Lower Body Type 2 is a slender body figure with larger hips. Lower Body Type 3 has more prominent thighs compared to the waist and belly. Lower Body Type 4 has both a prominent belly and prominent thighs.

• 대한공간정보학회지
• /
• 제22권3호
• /
• pp.137-143
• /
• 2014

최근 정부는 정부3.0이라는 새로운 정부운영의 패러다임으로 공공데이터를 적극적으로 개방하고 공유하는 정책을 펼치고 있다. 이와 함께 국토교통부에서는 국가공간정보 및 3차원건물, 영상지도를 포함한 다양한 콘텐츠를 일반인에게 제공하는 공간정보 오픈플랫폼 통합지도서비스(이하 브이월드)를 운영하고 있다. W3C재단의 오픈데이터 현황 보고서(2013)의 평가결과 우리나라는 정부의 정책적 지원 및 계획 부분에서는 긍정적인 결과를 나타낸 반면 데이터 관리 분야에서 취약하여 이에 대한 품질개선이 필요한 실정이다. 또한, 3차원 공간정보 객체 데이터(이하 3차원 모델)의 경우 데이터 구축에 활용한 디지털항공사진영상의 최신성이 부족하여 데이터의 현행화가 필요하다. 이에 본 논문에서는 3차원 모델의 품질요소인 수직위치 정확도에 대해 공공데이터이며, 실측 데이터인 건축물 대장의 높이 데이터를 기준으로 국내표준 품질평가 기법을 적용하여 데이터 품질을 측정하고, 측정오차에 대한 원인을 분석하여 공공데이터를 활용한 3차원 모델의 수직위치 정확도 향상 및 최신성의 유지 가능성을 제시하고자 한다. 연구 수행 결과 건축물대장의 높이 값을 품질평가 기준으로 적용하였을 경우 수직위치 정확도가 향상되는 것을 확인하였으며, 건축물 대장의 재건축, 증축 정보를 활용할 경우 3차원 모델의 최신성의 유지를 할 수 있음을 확인하였다.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.153-159
• /
• 2021

Purpose: The purpose of this study was to assess the fitness of anterior and posterior interim crowns fabricated by three different additive manufacturing technologies. Methods: The working model was digitized, and single crowns (maxillary right central incisor and maxillary right first molar) were designed using computer-aided design software (DentalCad 2.2; exocad). On each abutment, interim crowns (n=60) were fabricated using three types of additive manufacturing technologies. Then, the abutment appearance and internal scan data of the interim crown was obtained using an intraoral scanner. The fitness of the interim crowns were evaluated by using the superimposition of the three-dimensional scan data (Geomagic Control X; 3D Systems). The one-way analysis of variance and Tukey posterior test were used to compare the results among groups (α=0.05). Results: A significant difference was found in the fitness of the interim crowns according to the type of additive manufacturing technology (p<0.05). The posterior interim crown showed smaller root mean square value than the anterior interim crown. Conclusion: Since the fitness of the posterior interim crown produced by three types of additive manufacturing technology were all within clinically acceptable range (<120 ㎛), it can be sufficiently used for the fabrication of interim crowns.

• 대한수학회지
• /
• 제38권3호
• /
• pp.523-559
• /
• 2001

To predict the fate of groundwater contaminants, accurate spatially continuous information is needed. Because most field sampling of groundwater contaminants are not conducted spatially continuous manner, a special estimation technique is required to interpolate/extrapolate concentration distributions at unmeasured locations. A practical three-dimensional estimations method for in situ groundwater contaminant concentrations is introduced. It consistas of two general steps: estimation of macroscopic transport process and kriging. Using field data and nonlinear optimization techniques, the macroscopic behavior of the contaminant plume is estimated. A spatial distribution of residuals is obtained by subtracting the macroscopic transport portion from field data, then kriging is applied to estimate residuals at unsampled locations. To reduce outlier effects on obtaining correlations between residual data which are needed for determining variougram models, the R(sub)p-estimator is introduced. The proposed estimation method is applied to a field data set.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.197-212
• /
• 1997

The performance of a torque converter can be expressed by the performance parameters such as flow radius and flow angle, on the mean flow path. The geometric analysis of the torque converter is required to determine these parameters for the modeling of the torque converter. In general, the blade shape is depicted by three dimensional data at the mid-surface of blade or those of the pressure and suction side. To generate three dimensional model of the blade using the data mentioned above, a consistent data format and a shape generation algorithm are required. This paper presents a useful consistent data format of the blades and an algorithm for the geometrical shape generation. By the geometric analysis program to which the shape generation algorithm is embedded, the variation of blade angles in rotating element analyzed. Then finally, the analyzed results of geometric profile of a blade are compared with those of the blade design principle, so called forced vortex theorem.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.1-6
• /
• 2003

Steady flow bench test is a practical, powerful and widely used in most engine manufacturers to give a design concept of a new engine. In order to use steady data as a performance index, it is necessary to build some database, which can correlate the port characteristics with engine data. However, it is very difficult to investigate all port shapes with experimental tools. The steady flow scheme is relatively simple and its results are bulk ones such as flow rate and momentum of flow. Therefore a CFD code can be easily applied to the port evaluation. In this study, the steady flow test was simulated through three-dimensional analysis on intake port design for comparing with experimental data and confirming the feasibility of applying analytic method . for this purpose, the effect of valve curvature on flow rate was estimated by a CFD code. Numerical results were compared with those of real steady flow tests. As a result, the results of 3-D analysis were almost consistent with experimental data.