Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지)

Korean Academy of Stomatognathic Function and Occlusion (대한턱관절교합학회)
권호 표지
DOI QR코드

DOI QR Code

Three-dimensional printed complete denture fabrication using the scan data from the conventional denture-making process

통상적인 총의치 제작과정에서의 스캔 정보를 활용한 three-dimensional printed complete denture의 제작

  • Kim, Hyun-Min (Division of Prosthodontics, Department of Dentistry, Asan Medical Center) ;
  • Kim, Jong-Jin (Division of Prosthodontics, Department of Dentistry, Asan Medical Center) ;
  • Lee, Joo-Hee (Division of Prosthodontics, Department of Dentistry, Asan Medical Center) ;
  • Cha, Hyun-Suk (Division of Prosthodontics, Department of Dentistry, Asan Medical Center) ;
  • Baik, Jin (Division of Prosthodontics, Department of Dentistry, Asan Medical Center)
  • 김현민 (서울아산병원 치과보철과) ;
  • 김종진 (서울아산병원 치과보철과) ;
  • 이주희 (서울아산병원 치과보철과) ;
  • 차현석 (서울아산병원 치과보철과) ;
  • 백진 (서울아산병원 치과보철과)
  • Received : 2020.06.15
  • Accepted : 2020.07.23
  • Published : 2020.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently three-dimensional (3D) printed complete dentures are becoming more widely recognized as one of the treatment options for the edentulous patients. Korean National Healthcare, however, has not yet approved the application of the 3D printed dentures, and in the cases where the dentures should be refabricated, the conventional fabrication process needs to be entirely repeated. However, during the conventional process, the digital scan data of some key steps could be easily obtained. In this clinical case, using these data, a new pair of 3D printed dentures that improved the limitations of the first conventional dentures were successfully fabricated.

최근 three-dimensional (3D) printed denture가 완전 무치악 환자의 보철치료 시 선택할 수 있는 하나의 제작 방법으로 주목을 받고 있다. 그러나 아직까지 건강보험 총의치가 3D 프린팅 활용을 지원하지 않기 때문에 전통적인 방식만을 사용해야만 하며, 재제작이 필요할 경우 처음부터 제작과정을 반복해야 한다는 단점이 있다. 그러나 통상적인 의치 제작 과정 중 특정 단계들의 정보를 디지털 스캔하여 저장할 수 있고, 본 증례에서는 이 정보를 활용하여 통상적인 방식으로 제작된 첫번째 의치의 문제점을 보완한 새로운 의치를 3D 프린팅으로 완성하였다.

Keywords

References

  1. Oberoi G, Nitsch S, Edelmayer M, Janjic K, Muller AS, Agis H. 3D Printing - Encompassing the Facets of Dentistry. Front Bioeng Biotechnol 2018;6:172. https://doi.org/10.3389/fbioe.2018.00172
  2. Maeda Y, Minoura M, Tsutsumi S, Okada M, Nokubi T. A CAD/CAM system for removable denture. Part I: fabrication of complete dentures. Int J Prosthodont 1994;7:17-21.
  3. Kalberer N, Mehl A, Schimmel M, Muller F, Srinivasan M. CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: an in vitro evaluation of trueness. J Prosthet Dent 2019;121:637-43. https://doi.org/10.1016/j.prosdent.2018.09.001
  4. Yoon HI, Hwang HJ, Ohkubo C, Han JS, Park EJ. Evaluation of the trueness and tissue surface adaptation of CAD-CAM mandibular denture bases manufactured using digital light processing. J Prosthet Dent 2018;120:919-26. https://doi.org/10.1016/j.prosdent.2018.01.027
  5. Kattadiyil MT, Goodacre CJ, Baba NZ. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc 2013;41:407-16.
  6. Choi JJE, Uy CE, Plaksina P, Ramani RS, Ganjigatti R, Waddell JN. Bond Strength of Denture Teeth to Heat-Cured, CAD/CAM and 3D Printed Denture Acrylics. J Prosthodont 2019;29:415-21.
  7. Malik A. Flexural strength, fracture toughness, and denture tooth adhesion of computer aided milled and printed denture bases. Columbus (OH); Ohio State University; 2019. Available from: http://rave.ohiolink.edu/etdc/view?acc_num=osu1563296646075298 (updated 2020 Jun 30).
  8. Park JH, Cho IH, Shin SY, Choi YS. The treatment of an edentulous patient with $DENTCA^{(TM)}$ CAD/CAM Denture. J Korean Acad Prosthodont 2015;53:19-25. https://doi.org/10.4047/jkap.2015.53.1.19
  9. Goodacre BJ, Goodacre CJ, Baba NZ. Using Intraoral Scanning to Capture Complete Denture Impressions, Tooth Positions, and Centric Relation Records. Int J Prosthodont 2018;31:377-81. https://doi.org/10.11607/ijp.5741
  10. Sato K. This is Suction Denture. Seoul; Daehan-Narae Publishing Inc.; 2018. p. 54-107.
  11. el-Khodary NM, Shaaban NA, Abdel-Hakim AM. Effect of complete denture impression technique on the oral mucosa. J Prosthet Dent 1985;53:543-9. https://doi.org/10.1016/0022-3913(85)90644-4