• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.25.2-25.2
• /
• 2011

Recently, thin film capacitors used for vehicle inverters are small size, high capacitance, fast response, and large capacitance. But its applications were made up of liquid as electrolyte, so its capacitors are limited to low operating temperature range and the polarity. This research proposes using Ni-P alloys by electroless plating as the electrode instead of liquid electrode. Our substrate has a high aspect ratio and complicated shape because of anodic aluminum oxide (AAO). We used AAO because film thickness and effective surface area are depended on for high capacitance. As the metal electrode instead of electrolyte is injected into AAO, the film capacitor has advantages high voltage, wide operating temperature, and excellent frequency property. However, thin film capacitor made by electroless-plated Ni on AAO for full-filling into etched tunnel was limited from optimizing the deposition process so as to prevent open-through pore structures at the electroless plating owing to complicated morphological structure. In this paper, the electroless plating parameters are controlled by temperature in electroless Ni plating for reducing reaction rate. The Electrical properties with I-V and capacitance density were measured. By using nickel electrode, the capacitance density for the etched and Ni electroless plated films was 100 nFcm-2 while that for a film without any etch tunnel was 12.5 nFcm-2. Breakdown voltage and leakage current are improved, as the properties of metal deposition by electroless plating. The synthesized final nanostructures were characterized by scanning electron microscopy (SEM).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.118-121
• /
• 1999

PLZT thin films were fabricated with different energy density by pulsed laser deposition. PLZT films deposited on Pt/Ti/SiO$_2$/Sr substrate. This PLZT thin films of 5000$\AA$ thickness were crystallized at $600^{\circ}C$, 200mTorr $O_2$ pressure for 2 J/$\textrm{cm}^2$ laser energy density. 14/50/50 PLZT thin film showed a maximum dielectric constant value of $\varepsilon$$_{r}$=1289.9 P-E hysteresis loop of 14/ 50/50 PLZT thin film was slim ferroelectric. Leakage current density of 14/50/50 PLZT thin film was 10/ sup -7/=A/$\textrm{cm}^2$.>.

• 전자공학회논문지D
• /
• 제35D권5호
• /
• pp.33-39
• /
• 1998

The BST (Ba$_{1-x}$ Sr$_{x}$TiO$_{3}$)(50/50) thin film has been grown by RF magnetron reactive sputtering and its characteristics such as crystallization, surface roughness, and electrical properties have been investigated with varying the film thickness. The crystallization and surface roughness of BST thin film are investigated by using XRD and AFM, respectively The BST thin film anealed at 800.deg. C for 2 min has pure perovskite structure and good surface roughness of 16.1.angs.. We estimate that the thickness and dielectric constant of interface layer between BST film and electrode are 3nm and 18.9, respectively, by measuring the capacitance with various film thickness. As the film thickness increases form 80nm to 240nm, the dielectric constant at 10kHz increases from 199 to 265 and the leakage current density at 200kV/cm decreases from 0.682.mu.A/cm$^{2}$ to 0.181 .mu.A/cm$^{2}$. In the case of 240nm-thick BST thin film, the charge storage density and leakage current density at 5V are 50.5fC/.mu.m$^{2}$ and 0.182.mu.A/cm$^{2}$, respectively. The values indicate that the BST thin film is a very useful dielectric material for the DRAM capacitor.or.

• 한국재료학회지
• /
• 제9권5호
• /
• pp.509-514
• /
• 1999

Interest in the integrated capacitors, which make it possible to reduce the size of and to obtain improved electrical performance of an electronic system, is expanding. In this study, $Ta_2$O\ulcorner thin film capacitors for MCM integrated capacitors were fabricated on a Upilex-S polymer film by DC magnetron reactive sputtering and the effects of low temperature annealing at various atmospheres and substrate surface morphology on the capacitor characteristics were discussed. The low temperature($150^{\circ}C$) annealing produced improved capacitor yield irrespective of the annealing at mosphere. But the leakage current of the $O_2$-annealed film was larger than that of any other films. This is presumably mosphere. But the leakage current of the $O_2$-annealed film was larger than that of any other films. This is presumably due to the change of the $Ta_2$O\ulcorner film surface by oxygen, which was explained by conduction mechanism study. Leakage current and breakdown field strength of the capacitors fabricated on the Upilex-S film were 7.27$\times$10\ulcornerA/$\textrm{cm}^2$ and 1.0 MV/cm respectively. These capacitor characteristics were inferior to those of the capacitors fabricated on the Si substrate but enough to be used for decoupling capacitors in multilayer package. Roughness Analysis of each layer by AFM demonstrated that the properties of the capacitors fabricated on the polymer film were affected by the surface morphology of the substrate. This substrate effect could be classified into two factors. One is the surface morphology of the polymer film and the other is the surface morphology of the metal bottom electrode determined by the deposition process. Therefore, the control of the two factors is important to obtain improved electrical of capacitors deposited on a polymer film.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.108-109
• /
• 1993

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.73-74
• /
• 1998

• 한국전자파학회논문지
• /
• 제16권3호
• /
• pp.253-259
• /
• 2005

본 논문에서는 고가의 단결정 기판 대신에 저가의 실리콘 기판을 이용한 인터디지탈 구조의BaSrTiO$_{3}$(BST) 박막 가변 커패시터를 제안하였다. 저가의 실리콘 기판 위의 BST 박막은 PLD 장비를 이용하여 증착하였으며, 제작된 가변 커패시터는 4 GHz까지 측정되었다. 또한 최대 인가 전압은 50 V이며, 5 kV/cm 조건에서 약 30$\%$ 정도의 가변율을 얻는다. 저가의 실리콘 기판 위에 BST 박막을 증착, 커패시터를 구현함으로써 BST 박막을 이용한 가변 소자들을 집적화할 수 있는 가능성을 보였다.

• 한국항행학회논문지
• /
• 제16권6호
• /
• pp.1038-1043
• /
• 2012

본 연구에서는 재구성 RF 회로 설계 응용을 위해 BZN/BST/BZN 다층 유전체를 이용한 고-가변 커패시터를 설계 및 그 특성을 측정하였다. 고-가변 특성의 BST계 강유전체와 저-손실 특성의 BZN계 상유전체를 이용하여 47%의 가변성과 0.005의 $tan{\delta}$ 값을 갖는 저-손실 고-가변 BZN/BST/BZN 다층 유전체를 제작하였다. 이 다층 유전체를 이용하여 quartz 기판 위에 $327{\times}642{\mu}m2$ 크기로 제작된 가변 커패시터 칩은 15 V의 인가전압과 800 MHz 주파수에서 Q-factor가 10이고 60 %의 가변율을 달성하였다.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1080-1086
• /
• 2007

The aim of this paper is to establish the optimum fabrication condition of specimens, using the Vapor Deposition Polymerization Method(VDPM), which is one of modesto prepare functional organic thin films using a dry process, and to develop a thin film type humidity sensor which has good humidity sensitive characteristics. The inner part of the film became denser and roughness of the film surface eased as curing temperature increased so that thickness of the film could be made uniform. This also shows the appropriate curing temperature was $250^{\circ}C$. The basic structure of the humidity sensor is a parallel capacitor which consists of three layers of Aluminum/Polyimide/Aluminum. The result of SEM and AFM measurement shows that the thickness of PI thin films decreased and the refraction increased as curing temperature increased, which indicates that a capacitance-type humidity sensor utilizing polyimide thin film is fabricated on a glass substrate. The characteristics of fabricated samples were measured under various conditions, and the samples had linear characteristics in the range of 20-80 %RH, independent of temperature change, and low hysteresis characteristic.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.374-377
• /
• 2009

The characteristics of the deposited thin films of the zinc oxide (ZnO) at different oxygen pressures will be elucidated in this work. The resistivity of ZnO thin films were dominated by the carrier concentration under high oxygen pressure conditions while controlled by the carrier mobility at low oxygen ambiences. In addition, we will show the characteristics of the transparent ZnO based thin film transistor (TFT) fabricated at a full room temperature process with gate dielectric of gadolinium oxide ($Gd_2O_3$) thin films.