• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.219-226
• /
• 2006

The wastes (the needle leaves and branches) produced from thinning the forest were fermented under an anaerobic condition (pine silage) to utilize as a forage source of ruminants. An in situ trial was conducted with two ruminally fistulated Korean native cows by 4 replicates (2 bags per cow), and in vivo digestibility of pine silage was estimated with five Korean native steers by 5 replicates in incomplete double turn-over design. In order to investigate feed efficiency and carcass traits, forty eight Korean native bulls were assigned to four treatments (0%, 25%, 50%, 75% of pine silage) with a completely randomized design in 12 pens accommodating 4 animals per pen. The amounts of concentrate and roughage allowed to experimental animals were in the range of 2.5% and 0.6% of body weight, respectively. Animals had freely accessed to mineral block and water in stanchion barn.An in situ crude protein digestibility of the roughage sources when suspended for 48 hrs in the rumen was higher for feeding the pine silage than the rice straw, whereas NDF digestibility was vice versa. No differences between the treatments were observed in in vivo digestibilities of dry matter, crude protein and NDF. Daily body weight gain was significantly (P<0.01) higher for the pine silage substitutions compared with the rice straw feeding except for the 25% silage feeding. The pine silage feeding did not affect feed efficiency.In carcass traits, marbling score tended to be higher for the 50% pine silage treatment than the other treatments while back fat thickness tended to be the thinnest for the rice straw feeding. From these results, it may be recommended to substitute pine silage, as a forage source, for rice straw by 50 percent.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.255-268
• /
• 2006

Twenty four Hanwoo cull cows were assigned to 2 groups, control and melengerol acetate(MGA)+selenium supplement containing vitamin E(SeE), based on the parity(6.5±1.7 birth) and body weight (493.17±55.61kg), and the experiment was conducted to establish the reasonable fattening method of cull cows for 240 days. Average daily body gains during 240 days were 0.51kg and 0.63kg in control and MGA+SeE, respectively(P<0.10). DDMI/ADG of MGA+SeE group improved compared to control group(P<0.05). Therefore, supplementation of MGA+SeE in concentrates may accelerate both of the growth rate and feed efficiency in Hanwoo cull cows. MQI from MGA+SeE was more developed based on the larger rib-eye area and thinner backfat thickness in carcass than that from control. Marbling score for MGA+SeE tended to increase compared to control. Dietary Se supplementation significantly affected muscle Se concentration in longissimus dorsi meat of MGA+SeE group(P<0.05). Similar results to Se were obtained from α-Tocoperol concentration. During 7 days of simulated retail display, accumulations of thiobarbituric acid reactive substances(TBARS) concentration in beef was greater(P<0.05) in control than in supplemented cows. These results supported the hypothesis that supplementation of MGA+SeE improve the growth performance and carcass grade both by the growth stimulating effect of MGA+SeE and by preventing the oxidation of the longissimus dorsi muscle in Hanwoo cull cows.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.143-154
• /
• 2009

(Y $\times$ L) $\times$ D-crossbred gilts and barrows weighing $80.2\pm0.2$ kg were fed a "medium-energy" (ME) or "low-energy" (LE) diet (3.2 vs 3.0 M cal DE/kg) and slaughtered at 110, 125, or 138 kg, after which physicochemical and sensory quality traits of major primal cuts of resulting carcasses were analyzed, under a 2 (sex) $\times$ 2 (diet) $\times$ 3 (slaughter weight; SW) factorial arrangement of treatments. The ADG and ADFI were greater (P<0.01) in barrows than in gilts and also in 125- and 138-kg vs 110-kg SW. Moreover, ADG and gain:feed were greater in ME vs LE (P<0.01), whereas ADFI was greater in LE vs ME (P<0.01). Backfat thickness, which increased with increasing SW (P<0.01), was not affected by sex or diet. Carcass marbling score was greater (P<0.01) in gilts and LE than in barrows and ME, respectively. Carcass quality grade, which was superior in LE vs ME, was not affected by SW, whereas the yield grade decreased abruptly between 125- and 138-kg SW primarily due to the upper limit of carcass weight imposed on the A and B grades. Physicochemical characteristics including pH, drip loss, and variables pertaining to color of belly, ham, and loin were not affected significantly by any of the treatment factors, albeit statistically significant in some cases, in terms of quality criteria. In sensory evaluation, the acceptability of fresh belly was not influenced by any of the treatment factors. Marbling score of fresh ham was greater in LE vs ME (P<0.01) and tended to increase between 110- and 125-kg SW (P=0.10); in loin, the increase of this variable between the two SW was significant (P<0.01). Following cooking, LE was superior to ME in the acceptability in belly and ham, but the effect of SW was insignificant in any of the sensory quality traits evaluated in this study in any of the three major primal cuts. In conclusion, the present results suggest that SW can be increased to up to 138 kg without compromising carcass quality and that LE has some beneficial effects on quality of the whole carcass and the major primal cuts.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.347-362
• /
• 2020

Iron (hydro)oxides in aqueous environments are primarily formed due to mining activities, and they are known to be typical colloidal particles disturbing surrounding environments. Among them, hematites are widespread in surface environments, and their behavior is controlled by diverse factors in aqueous environments. This study was conducted to elucidate the effect of environmental factors, such as ionic composition and strength, pH, and natural organic matter (NOM) on the behavior of colloidal hematite particles. In particular, two analytical methods, such as dynamic light scattering (DLS) and single-particle ICP-MS (spICP-MS), were compared to quantify and characterize the behavior of colloidal hematites. According to the variation of ionic composition and strength, the aggregation/dispersion characteristics of the hematite particles were affected as a result of the change in the thickness of the diffuse double layer as well as the total force of electrostatic repulsion and van der Walls attraction. Besides, the more dispersed the particles were, the farther away the aqueous pH was from their point of zero charge (PZC). The results indicate that the electrostatic and steric (structural) stabilization of the particles was enhanced by the functional groups of the natural organic matter, such as carboxyl and phenolic, as the NOM coated the surface of colloidal hematite particles in aqueous environments. Furthermore, such coating effects seemed to increase with decreasing molar mass of NOM. On the contrary, these stabilization (dispersion) effects of NOM were much more diminished by divalent cations such as Ca²⁺ than monovalent ones (Na⁺), and it could be attributed to the fact that the former acted as bridges much more strongly between the NOM-coated hematite particles than the latter because of the relatively larger ionic potential of the former. Consequently, it was quantitatively confirmed that the behavior of colloidal hematites in aqueous environments was significantly affected by diverse factors, such as ionic composition and strength, pH, and NOM. Among them, the NOM seemed to be the primary and dominant one controlling the behavior of hematite colloids. Meanwhile, the results of the comparative study on DLS and spICPMS suggest that the analyses combining both methods are likely to improve the effectiveness on the quantitative characterization of colloidal behavior in aqueous environments because they showed different strengths: the main advantage of the DLS method is the speed and ease of the operation, while the outstanding merit of the spICP-MS are to consider the shape of particles and the type of aggregation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.271-276
• /
• 2017

Waterlogging strongly affects maize (Zea mays L.) growth. It is necessary to find the screening method of waterlogging tolerant maize lines. This study was to investigate the growth characters at V3 stage of maize, when is very sensitive to waterlogging. Six Korean maize inbred lines were subjected to waterlogging at V3 stage for 30 days. The 30 days waterlogging treatment significantly reduced plant height, number of expanded leaves, and SPAD value, compared with the control plants. SPAD values were significantly different among the six inbred lines, KS140 was the highest. The dry matter accumulation of aerial and root part were significantly decreased by 30 days waterlogging. KS140 was the weightiest among inbred lines. The dry matter of adventitious root showed same trend. Waterlogging treatment significantly reduced to ear length and thickness, grains filling length, grain number per ear, and maize grain. Plant height, SPAD value, and number of fully-expanded leave showed high correlation with maize grain yield, but number of senescent leaves, dry matter of adventitious root and TR ratio did not, suggesting that the former three traits may be good indicator for evaluating 30-day waterlogging tolerance of maize inbred lines. KS164 was the highest yield by increasing of grains filling length and grain number per ear of among waterlogging inbred lines. According to the results, evaluation of maize waterlogging should be consider both early growth characteristics and resilience in the later growth stages.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Horticultural Science & Technology
• /
• v.30 no.4
• /
• pp.449-462
• /
• 2012

The objectives of this study were to measure the range of motion for joints and muscle activation of upper limb for flower arrangement tasks for physical rehabilitation and to test horticultural therapy programs using flower arrangement tasks for improving upper limb function of the patients with stroke. Major flower arrangement tasks were classified with eight tasks (cutting 1, thick stem; cutting 2, thin stem; fixing 1, long stem; fixing 2, short stem; rolling a leaf; bending 1, thick stem; bending 2, thin stem; and winding, using a wire) based on the occupational analysis. When eight male university students (mean age $24.1{\pm}2.5$ years) conducted the eight flower arrangement tasks, range of motion for joints and muscle activation of upper limb were measured by a 3D motion analyzer and electromyography, respectively. Based on the results of the range of motion and muscle activation of upper limb, horticultural therapy programs using flower arrangement tasks (total 33 sessions) for improving upper limb function of the patients with stroke was conducted at a rehabilitation hospital, Seoul, South Korea and then the range of motion, grip strength, and upper limb function of the patients were tested. Among the eight flower arrangement tasks, cutting 1, winding, and bending 1 induced the highest value for the range of motion in joints of shoulder, elbow, and wrist, respectively (P < 0.001). In terms of muscle activation, eight flower arrangement tasks performed in this study showed various patterns of muscle activation and several muscles were simultaneously used for each task (P < 0.001). In addition, thickness and length of the materials used in a task had a prominent effect on the range of motion for joints and muscle activation of upper limb (P < 0.001). The stroke patients had positive effects for their range of motion of upper limb (shoulder, forearm, and elbow), grip strength, and overall upper limb function through the horticultural therapy program. Thus, this study suggested that flower arrangement tasks would be a potential horticultural activity for physical rehabilitation program. It would be interesting to apply a customized horticultural therapy program using flower arrangement tasks according to the symptoms of patient for physical rehabilitation.

• Journal of Bio-Environment Control
• /
• v.6 no.2
• /
• pp.110-116
• /
• 1997

This experiment was conducted to investigate the effects of root zone warming on fruit yield of oriental melon (Cucumis melo L. var. Makuwa) in winter season. Root zone was warmed by hot water flowing through pipe set at 35cm depth from the ridge. Treatments of minimum soil temperature at 20cm depth were 17, 21, $25^{\circ}C$ and non-warming from Jan. 18 to Apr. 18. The results are summarized as follows. 1. The blooming of female flower was faster 1 days in 17$^{\circ}C$ plot, 6 days in 21$^{\circ}C$ plot, and 7 days in $25^{\circ}C$ plot than in control plot and the days from blooming to harvesting were shorter 5 days in 17$^{\circ}C$ plot, 11 days in 21$^{\circ}C$ plot, and 12 days in $25^{\circ}C$ plot than in control plot. 2. Mean fruit weight was the highest in 21$^{\circ}C$ plot, followed $25^{\circ}C$, 17$^{\circ}C$ and control plots, respectively, and flesh thickness was the highest in $25^{\circ}C$ plot, followed by 21, 17$^{\circ}C$ and control plots, respectively. 3. Early and middle-phase yield was the highest in $25^{\circ}C$ plot, followed by 21$^{\circ}C$, 17$^{\circ}C$ and control plots but late yield was the highest in 17$^{\circ}C$ plot, followed by control, 21, and $25^{\circ}C$ plots. Total yield per 10a was higher 33% in 17$^{\circ}C$ plot, 49% in 21$^{\circ}C$ plot, and 37a in $25^{\circ}C$ plots than in control plot, harvested 1, 490kg per 10a. 4. Total yield was highest in 21$^{\circ}C$ plot, followed by $25^{\circ}C$, 17$^{\circ}C$, and control plots. Malformed and fermented fruit rates were the highest in control, followed by 17, 25, and 21$^{\circ}C$ plots and marketable fruit rate was 21, 25, 17$^{\circ}C$, and control plot in order.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.335-341
• /
• 2009

Statements of problem: Adequate bone quality and quantity were important to achieve initial stability and to prevent early failures. However there were few published data available regarding the actual effect of dimensional change in implant geometry on initial stability. Purpose: The purpose of the current study was to investigate the influence of diameter and length changes on initial stability of implants. Material and methods: Four types of dummy bone (D1, D2, D3 and D4) consisted of cortical and cancellous layers with different thickness were simulated. Implants which had similar surface area to each other ($3.5{\times}13.0-mm$, $4.0{\times}11.5-mm$, $4.5{\times}10.0-mm$, $5.0{\times}8.5-mm$) were inserted in dummy bones. Implant stability as a function of peak insertion torque and resonance frequency values were recorded for each implant. Results: 1. Bone quality was a major influential factor to achieve initial stability (P <.05). 2. In D1, D2 and D3 dummy bones, implant stability quotient values were not significantly different to each other (P >.05), however insertion torques were increased with wider and shorter implants (P <.05). 3. In D4 dummy bone, implant stability quotient values and insertion torques were decreased with wider and shorter implants (P <.05). Conclusion: From a point of view of initial stability, it is suggested that use of wide and short implant may be helpful in avoiding bone augmentation procedures in area of adequate bone quality.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.652-663
• /
• 1999

Craniosynostosis, the premature fusion of cranial sutures, presumably involves disturbance of the interactions between different tissues within the cranial sutures. Interestingly, point mutaions in the genes encoding for the fibroblast growth factor receptors(FGFRs), especially FGFR2, cause various types of human craniosynostosis syndromes. To elucidate the function of these genes in the early morphogenesis of mouse cranial sutures, we first analyzed by in situ hybridization the expression of FGFR2(BEK) and osteopontin, an early marker of osteogenic differentiation, in the sagittal suture of calvaria during embryonic(E15-E18) and postnatal stage(P1-P3). FGFR2(BEK) was intensely expressed in the osteogenic fronts, whose cells undergo differentiation into osteoprogenitor cells that ultimately lay down the bone matrix. Osteopontin was expressed throughout the parietal bones excluding the osteogenic fronts, the periphery of the parietal bones. To further examine the role of FGF-mediated FGFR signaling in cranial suture, we did in vitro experiments in E15.5 mouse calvarial explants. Interestingly, implantation of FGF2 soaked beads onto both the osteogenic fronts and mid-mesenchyme of sagittal suture after 36 hours organ culture resulted in the increase of the tissue thickness and cell number around FGF2 beads, moreover FGF4-soaked beads implanted onto the osteogenic fronts stimulated suture closure due to an accelerated bone growth, compared to FGF4 beads placed onto mid-mesenchyme of sagittal suture and BSA control beads. In addition FGF2 induced the ectopic expression of osteopontin and Msx1 genes. Taken together, these data indicate that FGF-mediated FGFR signaling has a important role in regulating the cranial bone growth and maintenance of cranial suture, and suggest that FGF-mediated FGFR signaling is involved in regulating the balance between the cell proliferation and differentiation through inducing the expression of osteopontin and Msx1 genes.