• Steel and Composite Structures
• /
• 제35권6호
• /
• pp.729-737
• /
• 2020

The goal of this study is to investigate dynamic responses of laminated composite beams under a moving load with thermal effects. The governing equations of problem are derived by using the Lagrange procedure. The transverse-shear strain and rotary inertia are considered within the Timoshenko beam theory. The material properties of laminas are considered as the temperature dependent physical property. The differential equations of the problem are solved by the Ritz method. The solution step of dynamic problem, the Newmark average acceleration method is used in the time history. A compassion study is performed for accuracy of used formulations and method. In the numerical results, the effects of velocity of moving load, temperature values, the fiber orientation angles and the stacking sequence of laminas on the dynamic responses of the composite laminated beam are investigated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.919-924
• /
• 2001

The purpose of this study is to prepare the basic data for the development of building board with expanded perlite. Each paste was mixed with four levels of water cement ratio(30, 40, 50, 60%), and expanded perlite was substituted with four levels of substitutive ratio(20, 40, 60, 80%) for the each paste. The physical property, compressive strength, bending strength and thermal conductivity of each cement composite which is made through previously described method were analyzed and the result was as follow. In the case of 80 percent substitutive ratio, the cement composite had a mechanical defect which was resulted from lack of paste content. In the case of 40 and 60percent substitutive ratio, the cement composite had sufficient strength, light weight and low thermal conductivity for application to fire resisting board.

• 한국주조공학회지
• /
• 제25권2호
• /
• pp.88-94
• /
• 2005

The microstructure and mechanical property of the ceramic reinforced AC4C matrix composites processed by squeeze casting were investigated. In this study Kaowool and Saffil fiber which are ceramic reinforcements are used as preform materials. As a matrix material, Al-7wt.%Si-0.3wt.%Mg(AC4C) has been used. In case of Kaowool and Saffil/AC4C composites, 7.5 MPa squeezing pressure and minimum 7.0% binder amount are needed to produce sound composite materials. The tensile strength of Kaowool/ AC4C composite is lower than the matrix metal and this can be explained by the melt unfilling due to formed cluster of Kaowool reinforcements. But the mechanical properties of hardness, wear resistance and thermal expansion are better than the matrix materials due to the strengthening effect of ceramic reinforcements.

• 한국표면공학회지
• /
• 제45권1호
• /
• pp.1-7
• /
• 2012

Multi-walled carbon nanotube (MWCNT) aluminum composite powders were deposited to form coatings using a high velocity oxygen fuel (HVOF) spraying process. High thermal energy and contact with atmospheric oxygen were supplied as the MWCNT aluminum composite particles were exposed to a gas flow field at high temperature (${\sim}3.0{\times}10^3$ K) during HVOF spraying. As a result, the particles underwent full or partial melting and rapid solidification due to the high thermal energy, and the exposure to oxygen induced the interfacial reaction of MWCNTs within the particle. The electrical and mechanical properties of MWCNT aluminum composite coatings were evaluated based on microstructure analysis. Electrical resistivity, elastic modulus, and micro-hardness, of the MWCNT aluminum composite coatings were higher than those of pure aluminum coating. The contribution of MWCNTs to the aluminum matrix can be attributed to their high electrical conductivity, dispersion hardening and anchoring effects. The relationship among the properties and the interaction of the MWCNTs with the aluminum matrix is discussed.

• Composites Research
• /
• 제33권5호
• /
• pp.302-308
• /
• 2020

본 연구는 탄소 복합소재를 이용하여 오토클레이브와 진공백(Vacuum Bag Only) 공정으로 소재의 열전도 계수를구하고 경화 거동 모델을 통해 표면부와 내부의 경화 거동을 예측 및 비교하였다. 공정에 따른 열전도 계수의 변화로 인해 내부 온도가 표면부와 차이를 보였다. 오토클레이브 공정의 경우 높은 열전도 계수를 통하여 표면부와 내부의 온도는 거의 일치를 하였으며, 경화 거동 역시 유사하게 진행이 되었다. 하지만, 진공백 공정의 경우 표면부와 내부의 경화 거동이 많은 차이를 보였다. 이 차이는 부품 내부의 품질 및 공기 배출에 영향을 준다. 기계적 물성 차이를 확인하고자 0도 단방향 시편으로 압축시험을 수행하였고, 그 결과 진공백 성형이 조금 낮은 물성을 갖는다는 것을 확인하였다.

• 한국포장학회지
• /
• 제23권2호
• /
• pp.67-74
• /
• 2017

In this work, the effects of nano $TiO_2$ on functionality and stability of low density polyethylene (LDPE) composite films were investigated for food packaging application. LDPE-nano $TiO_2$ composite films were prepared with various $TiO_2$ contents (0, 0.5, 1.0, 3.0 and 5.0wt%) by melt-extrusion and their basic properties such as crystallinity, chemical bonds and surface morphology were examined by XRD, FTIR and SEM. Ultraviolet (UV) light barrier property of as-prepared LDPE-nano $TiO_2$ composite films was also studied and the presence of nano $TiO_2$ resulted in significant improvement of UV light barrier compared to the pure LDPE film. To evaluate influence of nano $TiO_2$ on LDPE properties required as packaging material, thermal, mechanical, gas barrier and optical properties of LDPE-nano $TiO_2$ composite films were characterized with various analytical techniques including TGA, UTM, OTR, WVTR and UV-vis spectroscopy. As a result, except optical property of LDPE, no significant effects were found in other properties. Opacity of pure LDPE was greatly increased with increasing concentration of nano $TiO_2$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2021-2025
• /
• 2007

Performance of single cell at solid oxide fuel cell (SOFC) system is largely affected by electrocatalytic and thermal properties of cathode. Samarium-based perovskite oxide material is recently recognized as promising cathode material for intermediate temperature-operating SOFC due to its high electrocatalytic property. Perovskite structured $Sm_{0.5}Sr_{0.5}CoO_{3-\delta}$ and its composite material, $Sm_{0.5}Sr_{0.5}CoO_{3-\delta}/Sm_{0.2}Ce_{0.8}O_{1.9}$ were investigated in terms of area specific resistance (ASR), thermal expansion coefficient (TEC), thermal cycling and long term performance. $Sm_{0.2}Ce_{0.8}O_{1.9}$ was used as electrolyte material. Electrochemical ac impedance spectroscopy (EIS) and dilatometer were used to measure the cathodic properties. Composite cathode ($Sm_{0.5}Sr_{0.5}CoO_{3-\delta}$: $Sm_{0.2}Ce_{0.8}O_{1.9}$ = 6:4) showed a good ASR of 0.13${\Omega}$ $cm^2$ at 650$^{\circ}C$ and its TEC value was 12.3${\times}$10-6/K at 600$^{\circ}C$ which is similar to the value of ceria-based electrolyte of 11.9${\times}$10-6/K. Performance of composite cathode was maintained with no degradation even after 13 times thermal cycle test.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.122-127
• /
• 2000

The thermal expansion, thermal stability, mechanical strength and infrared radiative property of Al2TiO5-clay composites, prepared from synthesized Al2TiO5 and clay, were investigated to develop a material for far infrared radiators. The emittance of composites containing 10~50 wt% clay, heated at 1,20$0^{\circ}C$ for 3 h, increased with increasing clay content and emittance was about 0.3 and 0.92 in the ranges of 3,400~2,500 cm-1 and 2,500~400cm-1, respectively. The bulk density and bending strength of the Al2TiO5-clay composites increased with increasing clay content. 50 wt% Al2TiO5-50 wt% clay composite, heat-treated at 1,20$0^{\circ}C$, had an adequate strength for infrared radiators; 80 MPa. The degree of thermal expansion hysteresis decreased with increasing clay content and the mean thermal expansion coefficient increased with increasing clay content. The thermal expansion coefficient of 50 wt% Al2TiO5-50 wt% clay composite heated at 1,20$0^{\circ}C$ was 5.78$\times$10-6/$^{\circ}C$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.421-424
• /
• 2006

Nafion/Pt/Polypyrrole composite membranes were fabricated by chemical in-situ polymerization of pyrrole monomers with Pt precursors in Nafion matrix for DMFC. We demonstrated that positively charged pyrrolinum groups of polypyrrole particles were co-interacted with sulfonic groups of Nafion as verified by FT-IR results. Mutual interaction between $Nafion-SO_3^-$ (or negatively charged Pt precursors) and Polypyrrole$-NH_2^+$ influenced the physical properties of pristine Nafion. Thermal property proton conductivity, methanol permeability, and cell performance of pristine and modified Nafion were analyzed for an application of DMFC membrane. Thermal stabilities of sulfonic groups and side chains in Nafion/Pt/polypyrrole composite membranes were higher than those of Nafion due to mutual interaction between sulfonic groups of Nafion and pyrrolinum groups of polypyrrole. Methanol permeabilities of Nafion/Pt/Polypyrrole composite were reduced more proton conductivities with the increase in the content of Pt particles. As a result of that, the enhancement of cell performance by Nafion/Pt/Polypyrole O2 relative to Nafion was more pronounced under the specific experimental condition such as high temperature and more concentrated methanol solution.

• Carbon letters
• /
• 제1권3_4호
• /
• pp.154-157
• /
• 2001

Composite adsorbents were prepared by mixing water plant sludge with phenolic resin having the ratio of 1 : 1, 1 : 2, and 1 : 3 respectively, curing from $100^{\circ}C$ to $170^{\circ}C$ under $N_2$ atmosphere, and then activating with $N_2$ at $700^{\circ}C$. Thermal property, specific surface area and morphology of the composite adsorbents as well as their precursors were measured by TGA, BET and SEM respectively. Removal efficiency of the composite adsorbents to ${NH_4}^+$ and TOC was compared with those of commercial zeolite and activated carbon. The adsorbents presented very promising TOC removal efficiency of 98%, which was identical level to that of commercial activated carbon while they displayed removal efficiency, only 32%, of ${NH_4}^+$. Therefore, this composite adsorbent considered as the alternative material of commercial activated carbon, used as an expensive removal agent of organic substances and THM in water treatment plant and it also suggested a possibility of practical application in other processes.