• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.331-340
• /
• 2012

In the deep sub-micron ICs, growing amounts of on-die memory and scaling effects make embedded memories increasingly vulnerable to reliability and yield problems. Spare columns are often included in memories to repair defective cells or bit lines during production test. In many cases, the repair process will not use all spare columns. Schemes have been proposed to exploit these unused spare columns to store additional check bits which can be used to reduce the miscorrection probability for triple errors in single error correction-double error detection (SEC-DED). These additional check bits increase the dimensions of the parity check matrix (H-matrix) requiring extra area overhead. A method is proposed in this paper to efficiently fill the extra rows of the H-matrix on the basis of similarity of logic between the other rows. Optimization of the whole H-matrix is accomplished through logic sharing within a feasible operating time resulting in reduced area overhead. A detailed implementation using fuse technology is also proposed in this paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2557-2562
• /
• 2012

In order to maintain order in the genetic information at cells, it need ongoing monitoring and recovery system. DNA is accomplished by a combination of base pairs, Wrong base pairs is formed with a much more lower frequency than the normal DNA. if it does not modify and was accumulate, the Cells were died. In this study, mistakes of DNA replication and repair of the damaged part was introduced engineering concepts by mimicking DNA repair functions. It was presented recover the complementary part of the previously announced and presented an efficient algorithm at find and recover the complementary part.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.293-297
• /
• 2012

In order to maintain order in the genetic information at cells, it need ongoing monitoring and recovery system. DNA is accomplished by a combination of base pairs, Wrong base pairs is formed with a much more lower frequency than the normal DNA. if it does not modify and was accumulate, the Cells were died. In this study, mistakes of DNA replication and repair of the damaged part was introduced engineering concepts by mimicking DNA repair functions. It was presented recover the complementary part of the previously announced and presented an efficient algorithm at find and recover the complementary part.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.119-126
• /
• 2005

The geometrical parameters, vibrational frequencies, and relative energies of H$_2$(A$_{n+1}$X$_{2n}$)H$_2$ (A=C or Si, X=O or S, n = 1-2) oligomers have been investigated using high level ab initio quantum mechanical techniques with large basis sets. The equilibrium geometries have been optimized at the self-consistent field (SCF), the coupled cluster with single and double excitation (CCSD), and the CCSD with connected triple excitations [CCSD(T)] levels of theory. The highest level of theory employed in this study is cc-pVTZ CCSD(T). Harmonic vibrational frequencies and IR intensities are also determined at the SCF level of theory with various basis sets and confirm that all the optimized geometries are true minima. Also zero-point vibrational energies have been considered to predict the dimerization and the relative energies.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.25 no.3
• /
• pp.300-311
• /
• 2019

Purpose: The purpose of this study was to review and synthesize the existing literature on the experience of nursing students in simulation. Methods: A systematic review was undertaken using meta-ethnography. Eight databases were searched up to January 2014 for peer-reviewed studies, written in Korean and English, that reported primary data, used identifiable and interpretative qualitative methods, and offered a valuable contribution to the synthesis. Results: Nine studies were identified, with quality appraisal undertaken. Three key concepts were generated: ambivalence of simulation practice, learning by reflection, and building up of the competency as a future nurse. Six sub-concepts emerged: double sidedness of simulation setting; feeling ambivalence of simulation; learning from others; learning from self-reflection; improvement of confidence by role experience; and internalization of nursing knowledge. A line of argument has been developed based on the themes generated. Conclusion: The findings from this qualitative synthesis and other related literature indicated the importance of capability of educator and extension of the simulation system to facilitate effective simulation-based education.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.1
• /
• pp.28-31
• /
• 2010

A magnetic field calculation method for toroidal type winding which has circular section was developed. At first, the equation for magnetic field by single filament coil was extended using numerical integration to estimate the entire interesting region of solenoid, especially winding region itself. And then, the magnetic field by toroidal arrangement of solenoids was computed with a coordinate transformation of vector fields. The superconducting magnet with toroidal arrangement can be made up of several tens of solenoid type double pancake windings for some applications such as superconducting magnetic energy storage system(SMES). In this system, the field calculation on the high-Tc superconducting(HTS) tape itself is very important because the entire system can be reached to a fault by magnetic stress of conductor or the critical current of superconducting tape can be dramatically reduced under its self field condition. To make matters worse, 3-dimensional analysis is indispensable for this type of magnet and the most of commercial programs with finite element method can be taken too much time for analysis and design. In this paper, a magnetic field calculation method for toroidal type winding with circular section was induced.

• BMB Reports
• /
• v.44 no.9
• /
• pp.584-589
• /
• 2011

The mammalian ste20-like kinase (MST) pathway is important in the regulation of apoptosis and cell cycle and emerges as a novel tumor suppressor pathway. MST-induced phosphorylation of Salvador homolog 1 (SAV1), which is a scaffold protein, has not been evaluated in detail. We performed a mass spectrometric analysis of the SAV1 protein that was co-expressed with MST2. Phosphorylation was detected at Thr-26, Ser-27, Ser-36 and Ser-269. Although single or double mutations had little effects, the mutation of all four residues in SAV1 to Ala (SAV1-4A) had inhibitory effects on the MST pathway. MST2-mediated induction of SAV1-4A protein levels, SAV1-4A interaction with MST2 and the self-dimerization of SAV1-4A were weaker compared to those of wild-type SAV1. SAV1-4A inhibited MST2- and K-RasG12V-induced cell death of MCF7 cells. These results suggest that MST-mediated phosphorylation of four residues within SAV1 may be important in the induction of cell death by the MST pathway.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.5
• /
• pp.487-495
• /
• 1999

The objectives of this study were to analyze customer satisfaction by operational characteristics in business & industry foodservice operated by contracted foodservice management company. The instruments were developed by reviewing literatures on customer satisfaction and by intervewing with managers, employers and customers. A total of 1000 questionnaires were hand delivered at the ten contracted foodservice operations by designated coordinators. A total of 833 questionnaires were usable; resulting in an 83.3% response rate. Statistical data analysis was completed using the SAS 6.04 for description, T-test, ANOVA. Overall customer satisfaction score for office building foodservice was significantly higher than those for manufacturing company foodservice. As for the type of management contracts, overall customer satisfaction score for management fee contracts was significantly higher than those for profit and loss contracts. With regard to payment method, overall customer satisfaction score for meal card was higher than those for POS system. Concerning the categories of service, overall customer satisfaction for combo-tray service was higher than those for cafeteria-tray service and partially self-service. As for types of menus, the score of overall customer satisfaction was not significantly different between cafeteria menu and double choice menu.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.115-122
• /
• 2008

The hydrosilylation is an addition reaction of Si-H bond to unsaturated double bonds, which provides a convenient mechanism to synthesize poly(dimethylsiloxane-co-methylsiloxane)copolymer having siloxy units in polymer backbone. In this study, Poly(dimethylsiloxane-co-methylsiloxane) copolymer was synthesized through the polymerization reaction of cyclopentasiloxane with poly(methyl-hydrogen) siloxane. Silicone-hydrogen functional group of the poly(dimethylsiloxane-co-methylsiloxane) copolymer was substituted to the alkyl groups by hydrosilylation. And their structure was analyzed with FT-IR, H-NMR and GPC instruments, respectively. Surface tension of the synthetic compounds is increased from 22dyne/cm to 25dyne/cm according to increase additional EO moles. The cmc which was evaluated by surface tension was ranged $10^{-5}$ to $10^{-4}mol/L$ and it was decreased according to increase of dimethyl siloxyl content. HLB number of these surfactants was evaluated 9.5 to 11.5 range. These silicone surfactants is applied to self-emulsifier defoamer and personal care products as surface tension depressant, emulsifier, foam control agent.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.302-305
• /
• 2016

In this paper, a low on-resistance and high current driving capability trench gate power metal-oxide-semiconductor field-effect transistor (MOSFET) incorporating a current sensing feature is proposed and evaluated. In order to realize higher cell density, higher current driving capability, cost-effective production, and higher reliability, self-aligned trench etching and hydrogen annealing techniques are developed. While maintaining low threshold voltage and simultaneously improving gate oxide integrity, the double-layer gate oxide technology was adapted. The trench gate power MOSFET was designed with a 0.6 μm trench width and 3.0 μm cell pitch. The evaluated on-resistance and breakdown voltage of the device were less than 24 mΩ and 105 V, respectively. The measured sensing ratio was approximately 70:1. Sensing ratio variations depending on the gate applied voltage of 4 V ~ 10 V were less than 5.6%.