• The Journal of Korean Physical Therapy
• /
• 제15권4호
• /
• pp.13-23
• /
• 2003

The purpose of this study was to evaluate the change of lordosis according to plantar surface compliance in patients with chronic low back pain. Thirty patients with chronic low back pain aged between 20 and 40 were assigned to 3 groups: control group, experimental groups (FHRS group, FSRH group). The lordosis was examined before and after adaptation with corresponding foam types. The results were as follows : 1. As the result of comparing lordosis before and after test of the control group which any change did not exist in plantar surface compliance, there was not a significant difference(p>0.05). 2. As the result of comparing lordosis before and after test of the FHRS group which forefoot part of plantar surface is hard and rear foot part is soft, there was the significant increase(p<0.05). 3. As the result of comparing lordosis before and after test of the FSRH group which forefoot part of plantar surface is soft and rear foot part is hard, there was the significant decrease(p<0.05). 4. As the result of comparing lordosis of the FHRS group and FSRH group, there was not a significant difference before test(p>0.05). But, there was a significant difference after test(p<0.05).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.113-116
• /
• 2003

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. In this paper, proposes a method for efficiently generating test pattern which detect faults in BiCMOS circuits. In proposed method, BiCMOS circuit is divided into pull-up part and pull-down part, using structural property of BiCMOS circuit, and we generate test pattern using set theory for efficiently detecting faults which occured each divided blocks.

• 대한전자공학회논문지SD
• /
• 제41권7호
• /
• pp.43-52
• /
• 2004

본 논문은 마이크로프로세서의 설계과정 중, 중요도가 크게 부각되고 있는 기능 검증을 좀더 효율적으로 할 수 있는 검증환경을 제안한다. 본 검증 환경은 테스트 벡터 생성부분, 시뮬레이션 부분, 결과 비교 부분으로 구성되어 있다. 기존에 사용되던 검증 방법보다 좀더 효율적인 기능 검증이 가능하도록 하기 위해 바이어스 랜덤 테스트 벡터 생성기를 사용하였고, 참조모델로 재정의 가능 명령어 수준 시뮬레이터를 사용하였다. 본 검증 환경에서 수행된 결과를 비교함으로써 일반적인 테스트벡터에서 발견하기 어려운 오류 유형을 발견하고 새로운 오류 유형의 기준을 제시하는 효과를 지닌다.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.242-250
• /
• 2003

We propose the monitoring system scheme for the CPS/INS integrated navigation system. The design requirements of the monitoring system are suggested and the software scheme based on GUI is proposed. The proposed monitoring system consists of an I/O interface part, a navigation data display part, and a post-processing part. The I/O interface part is responsible for data communication between the monitoring system and a navigation computer unit. The navigation data display part provides various display methods to show the navigation data to user in real-time. The post-processing part collects the navigation data to analyze the performance of navigation system. The proposed monitoring system software was developed using the Visual C++ programming language and a van test was carried out to demonstrate the real-time operation of the monitoring system. The test result shows that the proposed monitoring system can be effectively applied to the CPS/INS integrated navigation system.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.198-208
• /
• 1995

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. Test to detect stuck-open faults in BiCMOS circuit is important, since these faults do sequential behavior and are represented as transition faults. In this paper, proposes a method for efficiently detecting transistor stuck-open faults in BiCMOS circuit by transforming them into slow-to=rise transition and slow-to-fall transition. In proposed method, BiCMOS circuit is transformed into equivalent gate-level circuit by dividing it into pull-up part which make output 1, and pull-down part which make output 0. Stuck-open faults in transistor are modelled as transition fault in input line of gate level circuit which is transformed from given circuit. Faults are detceted by using pull-up part gate level circuit when expected value is '01', or using pull-down part gate level circuit when expected value is '10'. By this method, transistor stuck-open faults in BiCMOS circuit are easily detected using conventional gate level test generation algorithm for transition fault.

• 한국안전학회지
• /
• 제23권1호
• /
• pp.1-11
• /
• 2008

In this study, small punch test and tensile test were performed with specimens directly machined from an ASTM A53 grade B carbon steel pipe at which an explosion accident was occurred in the Heavy Oil Unit. Main damage mechanism of the pipe was known as a high temperature hydrogen attack(HTHA). Effects of HTHA on the mechanical strength change of the A53B steel were studied in detail. Small punch test results have showed that maximum reaction forces, SP energy and ductility were decreased at hydrogen attacked part of the pipe compared with sound part of the pipe. Yield strength and tensile ultimate strength were calculated with the obtained small punch test curve results using different methods and compared the estimation methods. Small punch test simulation has been also performed with the finite element method and then mechanical strength, equivalent strain and fracture toughness were calculated with the obtained numerical analysis results. It was shown that the fracture toughness data calculated from small punch equivalent energy obtained by the finite element analysis for SP test was very low at the hydrogen attacked part.

• 한국인터넷방송통신학회논문지
• /
• 제12권2호
• /
• pp.43-52
• /
• 2012

본 논문에서는 단일 주파수 망(Single Frequency Network: SFN)으로 ATSC(Advanced Television Systems Committee) 지상파 디지털 TV 방송을 서비스하기 위한 간섭 제거 디지털 동일 재생중계기(Interference Cancellation Digital On Channel Regenerative Repeater: IC-DOCR)에 대한 실험실 테스트 결과를 기술하고, 그 결과를 분석한다. IC-DOCR 실험실 테스트는 수신부 테스트, 송신부 테스트, 그리고 궤환 제거 테스트로 구분된다. 수신부 테스트는 랜덤 잡음, 단일 에코, 다중경로 앙상블, 인접 채널 테스트 등을 포함하고, 송신부 테스트는 대역외 방사, 송신신호의 품질, 위상 잡음 테스트 등을 포함한다. 실험실 테스트 결과에 의하면, IC-DOCR은 수신신호 보다 28dB가 높은 궤환 신호를 제거할 수 있으며, 랜덤 잡음에 대한 TOV(Threshold Of Visibility)는 17.8dB이다. 또한 송신부 출력 신호는 미국의 FCC(Federal Communications Commission)규격을 만족하고, SNR 30dB 이상의 송신신호 품질을 유지한다.

• 시스템엔지니어링학술지
• /
• 제6권1호
• /
• pp.25-32
• /
• 2010

The Test and Evaluation (T&E) process is an integral part of the Systems Engineering Process. The purpose of Test and Evaluation (T&E) in a system development is to identify the areas of risk to be reduced or eliminated. In this study, when develop aircraft of Civil Aviation with development experience of Military Aircraft, it is that establish Test and Evaluation process. Test and Evaluation for KC-100 small aircraft development can divide to certification test and development test. Certification test is proved compliance about Korea Airworthiness standard (KAS Part 23), through Development Test verify required performance of aircraft. These Test and Evaluation Process is more efficient and optimized.

• 한국지진공학회논문집
• /
• 제6권2호
• /
• pp.21-28
• /
• 2002

Ductile behavior and strength of concrete-filled steel(CFS) piers was supported by many quasi-static cyclic loading tests. This test method, however, only estimates the member′s deformation capacity under escalating and repetitive displacement and ignores dynamic and random aspects of an earthquake load. Therefore, to understand complete seismic behavior of the structure against an earthquake, dynamic tests such as shaking table test and pseudo-dynamic tests are required as well as quasi-static tests. In this paper, following "Seismic Performance of Concrete-Filled Steel Piers Part I : Quasi-Static Cyclic Loadint Test", the seismic behavior of CFS and steel piers designed for I-Soo overpass in Seoul in investigated by the pseudo-dynamic test. In addition, the residual strength of both piers after an earthquake is estimated by the quasi-static test. The results show that both piers have satisfactory ductility and strength against well-known EI Centro earthquake although the CFS pier has better strength and energy dissipation than the steel pier.

• 방송공학회논문지
• /
• 제10권2호
• /
• pp.210-220
• /
• 2005

본 논문에서는 ATSC(Advanced Television Systems Committee) 지상파 디지털 TV 방송 방식을 사용하는 등화형 동일 채널 중계기(Equalization Digital On-Channel Repeater: EDOCR)에 대한 실험실 테스트 결과를 기술하고, 그 결과를 분석한다. 캐나다 CRC(Communications Research Centre)에서 수행된 EDOCR실험실 테스트는 수신부 테스트, 송신부 테스트, 그리고 EDOCR 송수신 신호의 주파수 일치 여부 테스트로 구분된다. 수신부 테스트는 궤환 신호, 랜덤 잡음, 단일 에코, 다중경로 앙상블, NTSC와 DTV간섭 테스트 등을 포함하며, 송신부 테스트는 대역외 방사, 송신신호의 품질, 위상 잡음 테스트 등을 포함한다. 실험실 테스트 결과에 의하면, EDOCR 수신부는 $0\~11s$ 범위 내의 평균 5.5dB 궤환 또는 단일 에코 신호를 제거할 수 있으며, 랜덤 잡음에 대한 TOV(Threshold of Visibility)는 평균 18.6dB이다. 또한, EDOCR 송신부 출력 신호는 미국의 FCC(Federal Communications Commission) 규격을 만족하며, 송수신 신호의 주파수는 일치한다.