• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.67-74
• /
• 2018

The verification for the design limit margin of the power device for the information communication and surveillance systems using HALT(Highly Accelerated Life Test) reliability test is described. The HALT reliability test performs with a step stress method which change condition until the marginal step in a design and development phase. The HALT test methods are the low temperature(cold) step stress test, the high temperature(hot) step stress test, the thermal shock cyclic stess test, and the high temperature destruct limit(hot DL) step stress test. The power device is checked the operating performance during the test. In this paper, the HALT was performed to find out the design limit margin of the power device.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.375-382
• /
• 2003

This study, Using Pusan clay, examined a relationship between Dynamic and Static Liquid Tests. The Static Liquid Tests wow carried out based on BS and JIS. The results of the study are summarized as follows. (1) The result of the Dynamic Liquid Limit Test showed that the liquid limit values of air-dried soil were greater than those of oven-dried soil by 4%~15% (2) The liquid limit value of the Static Liquid Limit Test was greater than that of the Dynamic Liquid Limit Test by 2%~9%. The following equations show the relationship between the two values WL,Fall(JIS) = 0.961ㆍWL,Cas. + 4.209 WL,Fall(BS) = 0.969ㆍWL,Cas + 5.024 (3) The liquid limit value of BS was greater than that of JIS by 1%~6%. The following equation shows the relationship between the two values.

• 오토저널
• /
• 제15권2호
• /
• pp.121-129
• /
• 1993

Plane strain punch stretching test (PSST) was developed to evaluate stamping formability of sheet materials. In this test, the rectangular specimen of sheet material is uniformly stretched up to fracture by raising a specially designed punch to certainly assure plane strain stretching deformation along the longitudinal direction of the specimen. The stamping formability was evaluated by limit punch height(LPH) in plane strain punch stretching test compared to limit dome height(LDH) in hemispherical punch stretching test. LPH-value in PSST well ranks the stamping formability of various material and correlates with press performance. Moreover by using ultrasonic thickness gauge the plane strain intercept-limit plane strain(FLCo)-in forming limit curve can be accurately determined from thickness measurement around the fracture area. The FLCo derived from thickness measurement well correlates with the results from circle grid analysis for the deformed circle grid marked on the surface of the specimen.

• The Journal of Korean Physical Therapy
• /
• 제25권4호
• /
• pp.180-186
• /
• 2013

Purpose: This study was to find a correlation between the bilateral reciprocal leg press test and a the balance in chronic stroke patients. Methods: Eighteen patients performed an isokinetic leg press test consisting of a bilateral reciprocal and unilateral mode. Following the isokinetic leg press testing, subjects performed the balance test: Berg Balance Scale (BBS), Timed Up & Go (TUG) test, and stability limit. Pearson product moment correlation coefficients were used to determine the correlation between the mean score of the isokinetic leg press test, balance test in both affected and non-affected side. Results: This study indicated a significant correlation between the bilateral reciprocal leg press test and stability limit. There were significant correlation between non-affected side bilateral leg press(NBL) and BBS (r=0.501), affected side bilateral leg press (ABL) and non-affected side stability limit(NS) (r=0.614), ABL and total stability limit (TS) (r=0.493), NBL and affected side stability limit(AS) (r=0.480), NBL and NS (r=0.560), NBL and TS (r=0.563), among the patients. Conclusion: Measurement of the lower extremity strength using the bilateral reciprocal leg press test can be used as an evaluating tool of the balance test.

• 한국지반공학회논문집
• /
• 제33권3호
• /
• pp.5-15
• /
• 2017

본 연구는 파주점토에 대해 Casagrande법(동적)과 원추관입시험법(정적)으로 액성한계와 소성한계시험을 실시하여 실험방법과 실험자에 따른 액 소성한계 결정에 미치는 영향을 검토하였다. 총 6명의 실험경험을 가진 학생이 참여하였다. 액성한계시험결과, 원추관입시험법으로 구한 액성한계는 Casagrande법으로 구한 액성한계보다 약 4% 정도 작게 나타났다. 원추관입시험법에서 실험횟수의 증가함에 따라 비례적으로 실험자별 실험값의 차이가 작아지고, 숙련도의 변화 폭도 양호해지는 경향을 보였다. 1점법에서 원추콘관입시험법에 의해 결정된 액성한계 값의 변화는 작고 Casagrande법보다 좀 더 양호한 값을 얻을 수 있었다. 소성한계시험결과, 액성한계와는 다르게 두 시험법의 결과 차이는 없는 것으로 나타났다. 즉, 두 시험방법 모두 실험자별 소성한계는 실험횟수가 증가함에 따라 평균 소성한계 값에 근접해 가는 경향을 보이고 있으며 숙련도의 변화도 실험횟수가 증가 할수록 좋아 지는 경향을 보였다.

• 소성∙가공
• /
• 제15권6호
• /
• pp.467-472
• /
• 2006

The forming limit diagram of tube is required for the part design and the formability analysis of tube hydroforming. The finite element analyses of simple bulge test were done to obtain the various strain combinations on FLC. The finite element analysis results were shown that the bursting at various strain combinations could be induced by simple bulge test. The experiment oi tube bulge test was carried out according to the test condition that obtained from finite element analysis and the left hand side of forming limit diagram was built.

• 품질경영학회지
• /
• 제35권3호
• /
• pp.107-117
• /
• 2007

The fatigue has been considered the most failure mode of metal, ceramic, and composite materials. In this paper, numerical experiments to asses the usefulness of two Dixon's methods(small and large samples) and 14 S-N methods on assumptions of lognormal fatigue limit distribution under RFL(Random Fatigue Limit) model are conducted for staircase(or up-and-down) test and compared by MSE(Mean Squared Error) and bias for estimates of mean log-fatigue limit. Also, guidelines for staircase test plans to choose initial stress level and step size are recommended from numerical experiments including sensitivity analyses. In addition, the parametric bootstrap method to construct a confidence interval for the mean of log-fatigue limit by the percentile method using a transition probability matrix of Markov chain is presented and illustrated with an example.

• Communications for Statistical Applications and Methods
• /
• 제21권6호
• /
• pp.539-559
• /
• 2014

We derive the exact distribution of summation for random samples from uniform distribution and then compare the exact distribution with the approximated normal distribution obtained by the central limit theorem. To check the similarity between two distributions, we consider five existing normality tests based on the difference between the target normal distribution and empirical distribution: Anderson-Darling test, Kolmogorov-Smirnov test, Cramer-von Mises test, Shapiro-Wilk test and Shaprio-Francia test. For the purpose of comparison, those normality tests are applied to the simulated data. It can sometimes be difficult to derive an exact distribution. Thus, we try two different transformations to find out which transform is easier to get the exact distribution in terms of calculation complexity. We compare two transformations and comment on the advantages and disadvantages for each transformation.

• 한방비만학회지
• /
• 제10권1호
• /
• pp.29-40
• /
• 2010

Objective The aim of this study was to evaluate the influence of Gamitaeeumjowi-tang(GTT) prescribed by doctors of korean(KMD) medicine on liver function. Methods For this single-center, prospective, observational study, we enrolled patients who wished to take GTT prescribed by KMD for losing weight. sixty(60) patients took GTT for 33.8 days and completed questionnaires. Liver function tests(LFTs) were performed bofore(first test) and after each GTT treatment(finish test). For LFT, T-bil, ALP, AST, ALT were measured. Result There were no significant changes in LFT data between the first and finish tests. At first test, levels of test seven(7) patients were more than twice of normal range of upper limit, levels of eight(8) patients were more than normal range of upper limit, less than twice of normal range of upper limit. At last test, levels of nine(9) patients were more than normal range of upper limit, less than twice of normal range of upper limit. Conclusion The current study showed that ingestion of GTT prescribed by KMD did not increase the frequency of abnormal LFTs, at least in the short term.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.68-79
• /
• 2018

지반조사에서 지반재료 특성의 판단은 매우 중요하다. Casagrande는 재료적 특성을 이용하여 흙을 분류하였다. 액 소성한계 시험은 흙의 기본적인 정보를 얻기 유용하며 실트와 점토를 분류하는 효과적인 방법과 재료 특성인 전단강도, 수축, 팽창 등의 정보를 제공한다. 액성한계와 다르게 소성한계는 시험절차의 모호성으로 많은 지반 공학자 및 기술자들이 시험결과에 의문을 제기하고 있다. 이를 해결하기 위해 낙하에너지를 이용한 새로운 소성한계 측정법을 제안하였다. 본 연구에서는 새로운 소성한계측정법의 정확성을 검토하기 위하여 새로운 카올리나이트, 일라이트, 벤토나이트를 각각 일정비율로 혼합하고 국내 서해안 일대의 시료를 채취하여 소성한계 측정법을 종래 방법과 비교 하였다. 비교 실험을 통한 검토결과 새로운 시험법의 시험값은 기존의 thread rolling시험의 시험값의 오차 범위가 10%에서 약 2%의 차이로 시험의 재현성이 높으며 기존 소성한계 시험값의 기울기와 차이가 0.11519 ~ 0.1925로 거의 시험의 결과 값이 유사 또는 일치하고 있음을 알 수 있었다. 또한 새로운 시험법을 보다 간편하게 적용할 수 있도록 일점법을 제안하였다.