• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1734-1737
• /
• 1997

The conventional fire detection devices are operated after a processed fire phase, which are sensing only a high density of somke level or high temperature heat. They are not so precision to detect a fire in the early phase to protect the facility form the fire. We need to develope a new high precision smoke detection system to keep expensive industrial facilities most reliably form fire. A new optical precision smoke detection system was developed. It monitors very low level density of smoke particles in the air. It is operated continously through many years without a stop or any malfunction. The developed precision smoke detection system will be installed in important industrial facilities, such as power plants, underground common tunnel, main control rooms, computer rooms etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1727-1731
• /
• 2004

We propose an ART2 neural network-based fault diagnosis method to diagnose of sensor in the gas monitoring system. In the proposed method, using thermal modulation of operating temperature of sensor, the signal patterns are extracted from the voltage of load resistance. Also, fault classifier by ART2 NN (adaptive resonance theory 2 neural network) with uneven vigilance parameters is used for fault isolation. The performances of the proposed fault diagnosis method are shown by simulation results using real data obtained from the gas monitoring system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.479-482
• /
• 2003

We propose a real time gas monitoring system for classifying various gases with different concentrations. Using thermal modulation of operating temperature of two sensors, we extract patterns of gases from the voltage across the load resistance. We adopt the relative resistance as a pre-processing method and an ART2 neural network as a pattern recognition method. The proposed method has been implemented in a real time embedded system with tin oxide gas sensors, TGS 2611, 2602 and an MSP430 ultra-low power microcontroller in the test chamber.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.45-49
• /
• 2015

Process gases with vapor or liquid phase as well as gas phase may experience alteration in itself or be contaminated in the fluid pipe to the process chamber. And thus it result in as particles or defects on the substrates in semiconductor, LCD, LED manufacturing. Purifiers and filters are used for control of contamination. However, none of detection device is available in the delivery line. In this paper, we propose simple device with lighting and sensing in order to predict contamination of the fluid or the tube wall. For some general purpose gases, it showed constant voltage output regardless of the flow rates. But, the smoke and the moisture in the air lowered the figure due to its concentration. Numerical values for several solid and liquid media were obtained. And, the operating temperature tendency was investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.694-700
• /
• 2013

The design of the exhaust manifold for the pulse converters of a 4 strokes high power medium-speed diesel engine is presented in terms of fatigue analysis. The said system undergoes thermal expansion due to high temperature of exhaust gas and is exposed to intrinsic vibration of the internal combustion engine. Moreover, the exhaust pulse generates pressure pulsating along the runner inside manifold. Under such circumstances, the design and construction of exhaust manifold must be carried out in a way to prevent early failure due to fracture. To validate the design concept, a test rig was developed to simulate the combination of thermal and vibrational movements, simultaneously. Experimental results showed that a certain sense of reliability can be achieved by considering a field factor obtained from the results of engine bench tests.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2007

In recent few years, low-power electronics has been a leading drive for technology developments nourished by rapidly growing market share. Mobile DRAM, as a fundamental block of hand-held devices, is now becoming a product developed by limitless competition. To support application specific mobile features, various new power-reduction schemes have been proposed and adopted by standardization. Tightened power budget in battery-operated systems makes conventional schemes not acceptable and increases difficulty of the circuit design. The mobile DRAM has successfully moved down to 1.5V era, and now it is about to move to 1.2V. Further voltage scaling, however, presents critical problems which must be overcome. This paper reviews critical issues in mobile DRAM design and various circuit schemes to solve the problems. Focused on analog circuits, bitline sensing, IO line sensing, refresh-related schemes, DC bias generation, and schemes for higher data rate are covered.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.6
• /
• pp.548-558
• /
• 1990

Physiology and genetics of early maturity in cereals are the subject of practical as well as scientific interest for agronomist and plant breeders, Thorough understanding of the true nature of such a complex character requires physiological and genetical knowledge about the internal factors, which are closely bound up with and react to some particular external or environmental factors. From the practical point of view. experiments should be conducted under controlled conditions. especially the day length and temperature, so that the genotypic differences pertaining to these factors may be discerned. Takahashi and Yasuda (1958, 1970) maintained that at least three physiological factors were responsible for determining earliness in barley. namely. (1) spring and winter habit of growth or vernalization requirement, (2) ogitioeruiduc response or sensitivity to short-day, and (3) earliness factor in a narrow sense or minimal vegetative growth. The same situations were true in common wheat also (Yasuda and Shimoyama, 1965), In this report. physiology and genetics of internal factors and their relations to the time of heading in the field will be presented with some problems concerning differences in mechanism of early maturity between barley and wheat.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.239-247
• /
• 2005

This paper deals with the development of a contact-type counting device using a piezoelectric polymer film as a sensor. The piezoelectric and vibration characteristics of the film under a bending vibration were investigated theoretically and experimentally. A counting device, which includes filters, an amplifier, an analog-digital converter, and a display, was designed and fabricated. The performance of the piezoelectric polymer sensor was evaluated in the sense of the responses to contact force, contact frequency, and contact speed. The life and the temperature effect were also investigated for the piezoelectric film sensor.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1996.07a
• /
• pp.4-9
• /
• 1996

The majority of plants sense environmental signals, such as day length or temperature, to select their transition timing from vegetative growth t flowering. Here, we report the identification of a regulatory gene, OsMADS1, that controls the photoperiod sensitivity of flowering time. Constitutive expression of OsMADS1 in a long-day flowering plant, Nicotiana sylvestris, resulted in flowering in both short-day long-day conditions. Similarly, ectopic expression of the gene in a short-day flowering plant, N. tabacum cv. Maryland Mammoth, also induced flowering regardless of the day length. The transition time was dependent on the level of the OsMADS1 transcript in transgenic plants. These suggest that OsMADS1 is a key regulatory factor that determines the transition from shoot apex to floral meristem and that it can be used for controlling flowering time in a variety of plant species.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.701-702
• /
• 2006

In this paper, we embodied the environment monitoring system that can acquire correct data in real-time. And we used module that is 2.4GHz IEEE 802.15.4 / Zigbee network for radio communication between nodes. The nodes sense the data of temperature, humidity, illumination periodically. The nodes store the data in their buffer and transmit. We confirmed that the system is in real-time as it is changed instantly due to the varying environment by the simulation Therefore, we can construct the efficient and correct system as applied this system to monitor the environment.