• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.362-365
• /
• 2015

Silica encapsulated ZnSe quantum dots (QDs) were prepared by employing two microemulsion systems: AOT/water/cyclohexane microemulsions containing ZnSe quantum dots with NP5/water/cyclohexane microemulsions containing tetraethylorthosilicate (TEOS). Using this method, cubic zinc blende nanoparticles (3 nm in diameter) were synthesized and encapsulated by silica nanoparticles (20 nm in diameter). The temperature dependence of photoluminescence (PL) for silica-encapsulated ZnSe QDs was investigated to evaluate this material as a temperature sensor media. The fluorescence emission intensity of silica-encapsulated ZnSe nanoparticles (NPs) was decreased with an increase of ambient temperature over the range from $30^{\circ}C$ to $60^{\circ}C$ and a linear relationship between the temperature and the emission intensity was observed. In addition, the temperature dependence of PL intensity for silica-encapsulated ZnSe NPs showed a reversible pattern on ambient temperature. A reversible temperature dependence of the luminescence combined with its insensitivity toward quenching by oxygen due to silica coating established this material as an attractive media for temperature sensor applications.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.450-455
• /
• 1999

We present Photoluminescence (PL) and Atomic Force Microscopy (AFM) image on InAs quantum dots (QDs) having different size which grown by Molecualr Beam Epitaxy (MBE). For different size QDs, analysis of the AFM profiles show that the density of QDs was the maximum value $(1.1\times10^{11}\textrm{/cm}^2)$ at 2.0 ML. In the spectra of QDs, it is found that the peak energy decreases with increasing dot size due to the effect of quantum confinement. Temperature dependence of PL intensities show that the PL is quenching and Red shift as the temperature increase. The FWHM range of 20K~180K is narrowing with increasing temperature. When temperature is over 180K, the line-width starts to in creases with increasing temperature. At last, temperature dependence of the integrated intensities were fit using the Arrehenius-type function for the activation energy. Fit value of the activation energy was increased with increasing QDs-size.

• Applied Science and Convergence Technology
• /
• v.27 no.5
• /
• pp.109-112
• /
• 2018

Optical properties of InAs/GaAs submonolayer-quantum dot (SML-QD) have been investigated using excitation intensity ($I_{ex}$)- and temperature-dependent photoluminescence (PL). At a low temperature (13 K) strong PL was observed at 1.420 eV with a very narrow full-width at half maximum, of 7.09 meV. The results of the $I_{ex}$ dependence show that the PL intensities increase with increasing $I_{ex}$. The enhancement factors (k) of PL increment as a function of $I_{ex}$ are 3.3 and 1.22 at low and high $I_{ex}$ regime, respectively. The high k value at low $I_{ex}$, implies that the activation energy of the SML-QDs is low. The calculated activation energy of the SML-QDs from temperature dependence is 30 meV.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.247-251
• /
• 2001

Photoluminescence(PL) were observed from room temperature to 8K on $Si^+$-implanted silicon-oxide films. The PL intensities are increased from room temperature to 50~80K and decreased below 50K. The blue-shift occurs during the increasing of PL intensity. Also, temperature-dependent PL were measured at peak wavelengths. The first peak is the most sensitive to the measuring temperature. The experimental results are explained by quantum size effect of O rich defects or(and) Si rich defects rather than nanocrystal silicon.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.141-148
• /
• 1999

High quality pure and Nb-doped $PbWO_{4}$ Single Crystal were grown from a 50 %~50 % mixture of Lead oxide (PbO) and Tungsten oxide $(WO_{3})$ by Czochralski method in Iridium crucible. The stoichiometric deviation correspond to the selective loss of the crystal constituents is found to be responsible for the yellowish coloration of $PbWO_{4}$. Through the X-ray powder diffraction experiment, we have investigated the lattice constant variations of each $PbWO_{4}$ crystals. We also present information on their photoluminescence (PL), optical absoption properties and Raman spectra. The temperature dependence of PL intensity and FWHM (Full Width Half Maximum) were measured in the temperature range 10 K~300 K. One observes a slight temperature dependence in the low temperature region and PL intensity decreases over 200 K by thermal quenching. The activation energy, Huang-Rhys coupling constant and inhomogenious brodenning acquired from their temperature dependence.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.102-102
• /
• 1999

Visible photoluminescence(PL) in si-implanted SiO2 films on crystaline silicon were observed. Thermal oxide films of 1 ${\mu}{\textrm}{m}$ thickness on P-type crystal silicon were made and si+ ions were implanted with 200keV acceleration voltage on ti. Argon laser (wavelength 488nm) and PM tube were used for PL measurements. As annealing time increased at low temperature, the visible PL intensity are increased and the peak positions are changed. On the other hand, with increasing annealing time at high temperature, the visible PL intensity are disappeared. From the PL peaks and intensity changes, XRD results, and TEM observations, we will discuss the origin of PL in Si+-implanted SiO2 films with oxygen righ defects and silicon rich defects.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.3
• /
• pp.6-9
• /
• 2000

Selectively excited photoluminescence(PL) spectroscopy has been carried out on the ~1540 nm $^{4}$I$_{13}$ 3/ to $^{4}$I/wub 15/2/ emissions of the multiple Er$^{3+}$ centers observed in Er-implante undoped and Mg-doped GAN at temperatures ranging from 6K to 295K. The temperature dependence of the Er$^{3+}$ PL spectra selectively excited by below -gap light demonstrates different quenching rates for the distinct Er$^{3+}$ centers, and indicates that the PL spectra with the most rapid thermal quenching rats do not contribute to the room temperature, above-p-pumped Er$^{3+}$ spectrum. In addition, selective PL spectroscopy has ben carried out on the Er$^{3+}$ emission in Er-implanted undoped and Mg-doped GaN at temperatures ranging 6K to 295K. The results indicate that the previously reported enhancement of the violet-pumped centers contribution to the low temperature above excited Er$^{3+}$ PL in Mg-doped GaN is also evident at room temperature.temperature.

• Korean Journal of Materials Research
• /
• v.16 no.3
• /
• pp.183-187
• /
• 2006

We present the effects of rapid thermal annealing (RTA) temperature on the structural and optical properties of self-assembled InAs quantum dot (QD) structures grown on GaAs substrates by molecular beam epitaxy (MBE). The photoluminescence (PL) measurements are performed in a closed-cycle refrigerator as a function of temperature for the unannealed and annealed samples. RTA at higher temperature results in the increase in island size, the corresponding decrease in the density of islands, and the redshift in the PL emission from the islands. The temperature dependence of the PL peak energy for the InAs QDs is well expressed by the Varshni equation. The thermal quenching activation energies for the samples unannealed and annealed at $600^{\circ}C$ are found to be $25{\pm}5meV$ and $47{\pm}5$ meV, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.151-152
• /
• 2005

ZnO films were deposited on MgO substrates (ZnO/MgO) by ultrasonic spray pyrolysis. Substrate temperature varied from $250^{\circ}C$ to $350^{\circ}C$. The crystallographic properties and surface morphologies of the ZnO/MgO films were studied by X ray diffraction and scanning electron microscopy. The properties of photoluminescence (PL) for the films were investigated by dependence of PL spectra on the substrate temperature and the annealing temperature. The ZnO/MgO films prepared at $350^{\circ}C$ showed the strongest UV emission peak at 18 K and 300 K among the films in this study.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.170-173
• /
• 2010

Nanocrystalline cadmium sulfide (CdS) thin films were prepared using chemical bath deposition in a solution bath containing $CdSO_4$, $SC(NH_2)_2$, and $NH_4OH$. The CdS thin films were investigated using X-ray diffraction (XRD), photoluminescence (PL), and Fourier transform infrared spectroscopy (FTIR). The as-deposited CdS thin film prepared at $80^{\circ}C$ for 60 min had a cubic phase with homogeneous and small grains. In the PL spectrum of the 2,900 A-thick CdS thin film, the broad red band around 1.7 eV and the broad high-energy band around 2.7 eV are attributed to the S vacancy and the band-to-band transition, respectively. As the deposition time increases to over 90 min, the PL intensity from the band-to-band transition significantly increases. The temperature dependence of the PL intensity for the CdS thin films was studied from 16 to 300 K. The $E_A$ and $E_B$ activation energies are obtained by fitting the temperature dependence of the PL intensity. The $E_A$ and $E_B$ are caused by the deep trap and shallow surface traps, respectively. From the FTIR analysis of the CdS thin films, a broad absorption band of the OH stretching vibration in the range $3,000-3,600\;cm^{-1}$ and the peak of the CN stretching vibration at $2,000\;cm^{-1}$ were found.