• Journal of applied mathematics & informatics
• /
• 제26권1_2호
• /
• pp.203-212
• /
• 2008

Practical stability is a significant practical importance in scientific and engineering problems but less investigated. In this paper, we studied practical stability in swarms system and present new results.

• Journal of Electrochemical Science and Technology
• /
• 제15권1호
• /
• pp.96-110
• /
• 2024

Polymer electrolyte membrane fuel cells (PEMFCs) are green energy conversion devices, for which commercial markets have been established, owing to their application in fuel cell vehicles (FCVs). Development of cathode electrocatalysts, replacing commercial Pt/C, plays a crucial role in factors such as cost reduction, high performance, and durability in FCVs. PtNi octahedral catalysts are promising for oxygen reduction reactions owing to their significantly higher mass activity (10-15 times) than that of Pt/C; however, their application in membrane electrode assemblies (MEAs) is challenged by their low stability. To overcome this durability issue, various approaches, such as third-metal doping, composition control, halide treatment, formation of a Pt layer, annealing treatment, and size control, have been explored and have shown promising improvements in stability in rotating disk electrode (RDE) testing. In this review, we aimed to compare the features of each strategy in terms of enhancing stability by introducing a stability improvement factor for a direct and reasonable comparison. The limitations of each strategy for enhancing stability of PtNi octahedral are also described. This review can serve as a valuable guide for the development of strategies to enhance the durability of octahedral PtNi.

• Journal of applied mathematics & informatics
• /
• 제28권3_4호
• /
• pp.583-596
• /
• 2010

In this paper, the problem of delay-dependent stability analysis for cellular neural networks systems with time-varying delays was considered. By using a new Lyapunov-Krasovskii function, delay-dependant stability conditions of the delayed cellular neural networks systems are proposed in terms of linear matrix inequalities (LMIs). Examples are provided to demonstrate the reduced conservatism of the proposed stability results.

• 대한수학회보
• /
• 제43권1호
• /
• pp.107-117
• /
• 2006

We give some necessary and sufficient conditions in order that a closed operator in a Hilbert space into another have the Hyers-Ulam stability. Moreover, we prove the existence of the stability constant for a closed operator. We also determine the stability constant in terms of the lower bound.

• 한국해양공학회지
• /
• 제34권2호
• /
• pp.55-65
• /
• 2020

A review of the 2nd generation of intact stability by the International Maritime Organization is performed. The main issues with the new stability criteria are reviewed. In particular, the physical background and related mathematical formulations of the pure loss of stability and parametric roll are summarized. Based on a literature review, benchmark calculation results for 17 different types of ships are discussed, and the final results are in excellent agreement with our physical expectations. Some relatively serious design problems are found in the application of the new stability criteria to sample ships built in Korea, and possible technical solutions are proposed, which have to be improved in the coming years.

• 농업과학연구
• /
• 제43권2호
• /
• pp.249-257
• /
• 2016

In this study, rapeseed extracts were obtained by supercritical carbon dioxide fluid extraction of defatted rapeseed to evaluate the stability and antioxidant activity of an oil-in-water (O/W) emulsion system. The oil-in-water emulsions were prepared from stripped soybean oil with different concentrations (0.3, 0.4, 0.5, and 0.6%) of rapeseed extract as an emulsifier. Their emulsion stability was compared to that of emulsions prepared with the commercial emulsifier, Tween 20 (Polysorbate 20, 0.2%). After stripping the soybean oil, the total tocopherol content was reduced from 51.4 g/100 g to 1.1 g/100 g. Emulsion stability and oxidative stability of emulsions prepared with Tween 20 and rapeseed extract as emulsifiers were evaluated. For 30 days droplet sizes of emulsions containing rapeseed extract (0.4, 0.5, and 0.6%) were not significantly different (p > 0.05). Similar results were obtained for emulsion stability (ES) and Turbiscan analysis, suggesting that the addition of rapeseed extract increased emulsion stability. The addition of rapeseed extract at more than 0.4% resulted in an emulsion stability comparable to the addition of 0.2% Tween 20. The antioxidative ability of rapeseed extract increased with the amount added in the emulsion. Moreover, the addition of 0.6% rapeseed extract resulted in the lowest emulsion peroxide values (10.3 mEq/L) among all treatments. Therefore, according to the stability of its antioxidative and physical stability properties, rapeseed extract from super critical extraction could be successfully applied to the food and cosmetic industries.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.165-174
• /
• 2022

The effect of fumed silica loading on the thermal stability and mechanical properties of fluorosilicone (FVMQ) rubber was investigated. The distribution of fumed silica inside FVMQ was characterized using scanning electron microscopy, and the thermal stability of composites was evaluated using thermogravimetric analysis and by the changes in mechanical performance during thermo-oxidative aging. The function mechanism of fumed silica was studied by Fourier transform infrared spectroscopy. The results show that with increasing silica content, the crosslink density of composites, the modulus at 100%, and tensile strength also increased, whereas the elongation at break decreased. Furthermore, increasing the silica content of composites increased the initial decomposition temperature (T_d) and residual weight of the composite after exposure to nitrogen. In addition, the thermal oxidative aging experiment demonstrated improved aging resistance of the FVMQ composites, including lower change in tensile strength, elongation at break, and modulus at 100%.

• Current Photovoltaic Research
• /
• 제9권4호
• /
• pp.145-159
• /
• 2021

Light soaking (LS) stability in polymer solar cells (PSCs) has always been a challenge to achieve due to unstable photoactive layer-electrode interface. Especially, the electron transport layer (ETL) and photoactive layer interface limits the LS stability of PSCs. Herein, we have modified the most commonly used and robust zinc oxide (ZnO) ETL-interface using an organic dye molecule and a co-adsorbent. Power conversion efficiencies have been slightly improved but when these PSCs were subjected to long term LS stability chamber, equipped with heat and humidity (45℃ and 85% relative humidity), an outstanding stability in the case of ZnO/dye+co-adsorbent ETL containing devices have been achieved. The enhanced LS stability occurred due to the suppressed interfacial defects and robust contact between the ZnO and photoactive layer. Current density as well as fill factors have been retained after LS with the modified ETL as compared to un-modified ETL, owing to their higher charge collection efficiencies which originated from higher electron mobilities. Moreover, the existence of less traps (as observed from light intensity-open circuit voltage measurements and dark currents at -2V) are also found to be one of the reasons for enhanced LS stability in the current study. We conclude that the mitigation ETL-surface traps using an organic dye with a co-adsorbent is an effective and robust approach to enhance the LS stability in PSCs.

• Transactions on Electrical and Electronic Materials
• /
• 제16권6호
• /
• pp.293-302
• /
• 2015

Degraded data stability, weaker write ability, and increased leakage power consumption are the primary concerns in scaled static random-access memory (SRAM) circuits. Two new SRAM cells are proposed in this paper for achieving enhanced read data stability and lower leakage power consumption in memory circuits. The bitline access transistors are asymmetrically gate-underlapped in the proposed SRAM cells. The strengths of the asymmetric bitline access transistors are weakened during read operations and enhanced during write operations, as the direction of current flow is reversed. With the proposed hybrid asymmetric SRAM cells, the read data stability is enhanced by up to 71.6% and leakage power consumption is suppressed up to 15.5%, while displaying similar write voltage margin and maintaining identical silicon area as compared to the conventional memory cells in a 15 nm FinFET technology.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.813-819
• /
• 2006

As the vehicle becomes bigger and faster, the importance of vehicle stability in an extreme driving condition caused by sudden steering, road condition or unexpected case has been emphasized. The ESP system is being utilized to improve the handling performance and the vehicle stability. In this study, we implemented various tests and proposed estimation methods for ESP characteristics in extreme driving situations. The estimation methods for ESP proposed in this paper are expected to facilitate developing the control logic and improving the performance of the ESP system.