• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.84-91
• /
• 2005

In case of soil nailing system, there have been many attempts to expand into slope and temporary earth retaining system stabilization method since the first ground excavation earth retaining system construction in 1993. Recently, jointing wall, underground wall of buildings and excavation earth retaining wall, construction were increasingly applied for effective utilization of the limited underground space and land application maximized. However, the application of joining wall into retaining wall or building by temporary soil nailing system and design of permanent wall were performed by using Rankine earth pressure theory without considering the distribution of earth pressure in the soil nailing. In this study was performed to introduce the design case by 'Two-Body Translation mechanism (TBTM)' to be able to consider distribution of earth pressure in the soil nailing when designing the permanent jointing wall using soil nailing system for effective utilization of ground space. Also, this study attempts to evaluate the earth pressure change, decreasing effect of wall displacement and increasing effect of stability when advanced soil nailing system is constructed using $FLAC^{2D}$ ${\nu}er.$ 3.30 program and 'Two-Body Translation mechanism'.

• Coupled systems mechanics
• /
• v.2 no.1
• /
• pp.23-51
• /
• 2013

An analytical algorithm for the estimation of the resistance forces exerted on the dipper of a cable shovel and the specific energy consumed in the cutting-loading process is presented. Forces due to payload and to cutting of geomaterials under given initial conditions, cutting trajectory of the bucket, bucket's design, and geomaterial properties are analytically computed. The excavation process has been modeled by means of a kinematical shovel model, as well as of dynamic payload and cutting resistance models. For the calculation of the cutting forces, a logsandwich passive failure mechanism of the geomaterial is considered, as has been found by considering that a slip surface propagates like a mixed mode crack. Subsequently, the Upper-Bound theorem of Limit Analysis Theory is applied for the approximate calculation of the maximum reacting forces exerted on the dipper of the cable shovel. This algorithm has been implemented into an Excel$^{TM}$ spreadsheet to facilitate user-friendly, "transparent" calculations and built-in data analysis techniques. Its use is demonstrated with a realistic application of a medium-sized shovel. It was found, among others, that the specific energy of cutting exhibits a size effect, such that it decreases as the (-1)-power of the cutting depth for the considered example application.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2003.05a
• /
• pp.200-203
• /
• 2003

Ubiquitous Computing proposed technology for Next age be presented useful function and easier access by information technology that have existed just online move into physical space. Ubiquitous Computing described 'Anytime, Anywhere, Any device' is Intelligent Environment that help human life in hidden area. This study aimed to search that analyzed what find concept and technical peculiarity in Ubiquitous Computing on architectural vision for demanded elements in architectural design during creating space.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.381-386
• /
• 1999

In this study , the system was developed for design procecure of agriultural engineering. For development of the system, design reports of Rural Development Corporation were analyzed, the components using in system were searched, and the user interface was developed. It was found that the development of this system would be used for design procedure using design information based on RDBMS.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.161-168
• /
• 2011

Objective: The aim of this study is to review the ISO(the International Organization for Standardization) standards recommendations on a human error tolerant control room design. Background: ISO TC(Technical Committee) 159 published a variety of international standards on design of mental and physical work, design of displays and controls, and workstation layout design. A proper edition of these standards can be a good resource for a human error tolerant control center design guidelines. Method: Recommendations of ISO TC 159 standards were grouped into arrangement of control suite, layout of control room, layout and dimensions of workstations, design of displays and controls, environmental design, alarm, automation, management system design, procedure and training. Results: It was found that some standards on the design of supervisory control and data acquisition(SCADA), alarm, automation, layout, workload management, and environment can be used for human error prevention guidelines in the control center design. Conclusion: ISO TC 159 standards were not sufficient to cover all the ergonomics area of control center design. Application: Designers can have technical aids from these ISO standards to improve ergonomic performance of their control center.

• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.458-468
• /
• 2013

Large capacity reactive power compensation and harmonic control in the low-voltage grid of an enterprise, are important technical means to improve power quality and reduce power loss. In this paper, the principle of an efficient power quality controller is analyzed. Then, key application technologies of the HPQC which would influence the performances of the HPQC are studied. Based on an analysis of the harmonic shunt problem, a frequency dividing control strategy of the HPQC continuous subsystem is proposed. A parameter design method of the HPQC discrete subsystem and its installation method are also proposed to ensure the system compensation effect. HPQC systems have been designed for a copper foil plant. The effectiveness of this paper has been verified by the simulation and application results.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.2
• /
• pp.143-147
• /
• 2016

In recent years, some modifications were introduced in the stress-strain relationship of the steel in order to develop a more efficient shear model for reinforced concrete members. The last contribution in this sense corresponding to the Refined Compression Field Theory (RCFT, 2009); this theory proposed a steel constitutive model that has account the tension stiffening area prescribed by technical codes, what simplifies all the design process. However, under certain design conditions supported by such codes, the RCFT model does not provide a real (non-complex) solution for the steel yield strain when the prescribed tension stiffening area is considered; then the load-strain response cannot be computed. In this technical note, the tension stiffening area is fixed in order to guarantee the application of the embedded steel constitutive model for all the standard design range.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.330-333
• /
• 2002

The design of high power electronic circuits and the verification of the design by practical experiments are time and cost consuming. Recently power circuit simulation technique is developing to do it easily. However, most of the simulation has used the ideal switch model consists of passive component that can not describe the physical characteristics of semiconductor devices and cannot describe the switching transient state. For the design of such power electronic circuits by the simulation, the switching transients are very important. Therefore the simulation models must describe the switching transient and the stationary behavior as precisely as possible on the hand and as fast as possible the other hand. This paper introduces the application of the physical models of power devices that are developed by TUM(Technical University of Munich, Germany) for the power electronic circuit analysis.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.221-222
• /
• 2018

본 논문에서는 android의 accelerometer sensor를 활용하여 예기치 못한 상황에 사용자를 보호 할 수 있는 어플리케이션을 설계하고 구현한다. 이 어플리케이션은 스마트폰을 흔들 때 accelerometer sensor가 센싱하여 어플리케이션을 자동으로 실행한다. 또한 경광등 소리를 울리고 사용자의 위치정보를 어플리케이션에 저장된 지인의 연락처로 전송한다. 사용자는 자신이 빈번하게 다니는 경로를 저장할 수 있으며, 이 경로에 대한 정보를 연락처에 저장된 지인들에게 제공한다. 이 어플리케이션을 사용하는 사용자는 범죄로부터 자신을 지키고, 위험한 경우 주변 사람들에게 도움을 요청할 수 있는 기능을 제공한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.237-238
• /
• 2022

본 논문에서는 안드로이드 플랫폼 기반의 스마트폰에 내장된 중력 센서와 GPS 센서, NFC 태그를 활용한 조난 방지 애플리케이션을 설계하고 구현한다. 중력 센서를 통해 사용자의 움직임을 감지하고 GPS 센서를 사용해 사용자의 위치 정보를 확인하여 필요에 따라 회원가입 시 등록한 보호자에게 문자 메시지를 전송하거나 신고할 수 있도록 구현한다. 또한 등산 중 길을 잃었을 경우, NFC 태그를 통해 등산로의 정보를 이미지로 확인할 수 있도록 구현한다.