• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.40-43
• /
• 1997

It is known tat the echoes from the most objects differ from the incident pulses in amplitude and frequency .Especially, the frequency in echoes from moving target is shiftby the Doppler effect. it causes to reduce the receiving sensitivity of piezoelectric transducers that have definite band width. The electric impedance, whichis connected to the electrical terminals, notably changes the resonant frequency of a thickeness mode piezoelectric vibrator with high electromechanical doupling due to the electroelastic effect. Using this effect, we have developed a frequency controllable ultrasonic transducer which is mad eof multi-layered PZT disks to adjust to frequency shifted by Doppler effect. The characteristics of transducer can be obtained by using the equivalent circuit of transmission line model. It was confirmed experimentally that the center frequency and band width of the trasducer could be controlled by the conditions of the electrical terminals. These results coincided with theoretical results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1719-1724
• /
• 2013

In this paper, a size-reduction technique is presented for the RFID reader antenna working at two UHF bands. To tackle the problem of size increase in multi-band applications, two resonance paths are made to occur in one geometry with a single feed. While one resonance path is combined with the other, the entire geometry is determined to guarantee the resonance at the target frequencies through the dual-band input impedance matching. The antenna performance is predicted by the full-wave simulation, and the design method is verified by observing the good agreement between the simulated and measured results. At the two frequencies, the satisfactory return loss as well as the antenna efficiency and peak gain of the far-field pattern is obtained.

• Applied Science and Convergence Technology
• /
• v.23 no.4
• /
• pp.161-168
• /
• 2014

A real-time monitoring of immersed antenna type inductively coupled plasma (ICP) was done with a homemade 2 dimensional voltage probe array to check the uniformity of the plasma. Measured voltage values with a high impedance voltmeter are close to the floating potential of the plasma. As the substrate carrier was moving into a magnetron sputtering plasma diffusive from a $125mm{\times}625mm$ size cathode, measured results showed reliably separation of plasma into the upper and lower empty space over the carrier. Infra red thermal imaging camera was used to observe the cross corner effect in situ without eroding a target to the end of the usage. 3 dimensional particle trace model was used to analyze the magnetron discharge's behavior.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.68-74
• /
• 2002

In this paper, a pre-layout design approach for high-speed microprocessor is proposed. For multilayer PCB stark up configuration as well as selection and placement of decoupling capacitors, an effective solution for reducing SSN and EMI is obtained by modeling and simulation of complete power distribution system. The system model includes VRM, decoupling capacitors, multiple power and ground planes for core voltage, vias, as well as microprocessor. Finally, the simulation results are verified by measurements data.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.596-599
• /
• 2000

A natural admittance control system design is presented for a particular type of interaction controller that achieve high-performance and guarantees stability. The admittance control Significantly improves performance when Coulomb friction is present in the one link robot system. The technique requires a careful choice of the target impedance. Experimental performance results are presented for a two-mass system with internal Coulomb friction. Results demonstrate that the admittance control law is successful in rejecting internal Coulomb friction force disturbances. The controller was designed and implemented on our system that we set up one link robot system and hardware configuration system, and performance results are presented.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.25-36
• /
• 2004

This paper proposes and measures the performance of a distributed EIT (Electrical Impedance Tomography) image reconstruction algorithm which has a master-slave structure. The image construction is a computation based application of which the execute time is proportional to the cube of the unknowns. After receiving a specific frame from the master, each computing node extracts the basic elements by executing the first iteration of Kalman Filter in parallel. Then the master merges the basic element lists into one group and then performs the sequential iterations with the reduced number of unknowns. Every computing node has MATLAB functions as well as extended library implemented for the exchange of MATLAB data structure. The master implements another libraries such as threaded multiplication, partitioned inverse, and fast Jacobian to improve the speed of the serial execution part. The parallel library reduces the reconstruction time of image visualization about by half, while the distributed grouping scheme further reduces by about 12 times for the given target object when there are 4 computing nodes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.31-39
• /
• 2004

This paper illustrates the noise characteristics under chip's core operations according to types of packages and modules for DDR DRAM For analyzing this, the impedance profiles and power noises are analyzed with DRAM chips having commercial TSOP package and commercial FBGA package on TSOP-based DIMM and FBGA-based DIMH In controversy with common concepts, we find that the noise-isolation characteristics of FBGA package are more weak and sensitive on transferred noises than those of the TSOP package. In addition, the simulated results show that the decoupling capacitor locations of modules are more important to control the self and transfer noise characteristics than the lead inductance of the packages. Therefore, satisfying the target spec of the noise suppression and isolation can be achieved through the design of power distribution systems only with considering not only the package types but also the whole module system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.9-19
• /
• 2002

An NAC(Natural Admittance Control) system design is presented for interaction controller that achieves high-performance and guarantees stability. The NAC can be classified as a particular flavor of impedance control similar to control schemes that have velocity compensator and force compensator. The NAC significantly improves the response characteristics when Coulomb friction is presented in One-link Robot System and guarantees stability when robot contacts with environment. Pragmatic rules for NAC synthesis are derived. It shows method to choose a target impedance for realizable force compensator. Important parameters are found experimentally. It is demonstrated, by the experimental result, that NAC algorithm is successful in rejecting Coulomb friction through velocity compensator and guarantees stability through force compensator. We implement an experimental set-up consisting of environment-generated one-link robot system and DSP system for controller development. We apply the natural admittance controller to the One-link robot system, and show the good performance on desired force control in case of contacting with arbitrary environment.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.465-474
• /
• 2001

Type 304SS coatings were performed at 200$\square$ onto AISI 1045 carbon steel substrate using unbalanced magnetron sputtering (UBMS) with an austenitic AISI 304 stainless steel (SS) target of 100mm diameter. The total deposition pressure in the active Ar gas was 2$\times$10$^{-3}$ Torr. Coatings were done at various target power densities and bias voltages. Chemical compositions of metallic elements of the coatings were measured by energy dispersive X-rays spectroscopy (EDS). The structure and the morphology of Type 304SS coatings were investigated by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). Corrosion properties of the coated specimens were examined using electrochemical polarization measurements and electrochemical impedance spectroscopy in a deaerated 3.5% NaCl solution. The porosity rate was obtained from a comparison of the dc polarization resistance of the uncoated and coated substrates. Scratch adhesion testing was used to compare the critical loads for different coatings. XRD results showed that the sputtered films exhibit a ferritic b.c.c. $\alpha$-phase. Potentiodynamic polarization curves indicated that all samples had much higher corrosion potential and better corrosion resistance than the bare steel substrate. The corrosion performance increased with increasing power density and the adhesion was enhanced at the bias voltage of -50V. An improvement in the corrosion resistance can be obtained with a better coating adhesion. Finally, an optimized deposition condition for corrosion protection was found as $40W/cm^2$ and -50V.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.739-745
• /
• 2003

In $N_{x}$ films were deposited on soda-lime glass without substrate heating by reactive dc magnetron sputtering using indium (In) metal target. Depositions were carried out under various total gas pressures ( $P_{tot}$) of mixture gases (Ar+$N_2$ or He+$N_2$). He gas was introduced to $N_2$ gas in order to enhance the reactivity of nitrogen on film surface by the "penning ionization". Plasma impedance decreased greatly when 20% or more introduced the $N_2$ gas. This is due to the In $N_{x}$ layers formed on target surface because a secondary electron emission rate of InN is small compared with In metal. XRD patterns of the films revealed that <001> preferred oriented polycrystalline In $N_{x}$ films, where the crystallinity of the films was improved with decrease of $P_{tot}$ and with increase of $N_2$ flow ratio. The improvement of the crystallinity and stoichimetry of the In $N_{x}$ films were considered to be caused by an increase in the activated nitrogen radicals and also by an increase in the kinetic energy of sputtered In atoms arriving at growing film surface, which should enhance the chemical reaction and surface migration on the growing film surface, respectively. Furthermore, the films deposited using mixture gases of He+$N_2$ showed higher crystallinity compared with the film deposited by the mixture gases of Ar+$N_2$.$.EX>.