• 대한치과의사협회지
• /
• 제13권2호
• /
• pp.133-136
• /
• 1975

The autor studied skin reactions and their incidences among 130 dental students and dentists to 2% Iidocaine HCI, 2% procaine HCI, direct resin, plaster of paris, zinc oxide-eugenol cement, and adhesive plaster by Patch test. The results of the studies are as follows: 1. Eighteen cases out of 130 revealed slight positive reaction toa 1 or 2 allergens. 2. Lidocaine HCL showed 1 case, procaine HCL 4 cases, direct resin 4 cases, Z.O.E. cement 1 case, adhesive plaster 13 case, and plaster of paris showed none. 3. Two delayed reaction were detected after 48 hours, one of which reacted both lidocaine HCL and direct resin, and the other one was a case of adhesive plaster.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권6호
• /
• pp.372-377
• /
• 2003

Many of modem radars use modulated pulse repetition intervals for the purpose of anti-aliasing and ECCM. The interception, analysis and identification of radar signals is a major function of a radar intercept receiver. In this paper, we discuss the identification of pulse repetition intervals modulation of radar signals which is one of the major parameters for the analysis of radar. We proposed a new algorithm based on Markov models approach. This approach is shown to be reliable and robust to the missing pulses, as well as to require only relatively few pulse data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.70-73
• /
• 1992

With regard to the supply of electric power in better quality, the problem of lightning is becoming more and more important in the operation of an electric power system. In this article a description is given of the new lightning position and tracking system which will be installed in KEPCO. The system is based on the principle of time-of-arrival (TOA) rather than the conventional direction-finding (DF) method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.321-322
• /
• 2008

CSS(Chirp Spread Spectrum) technology adopt SDS-TWR algorithms of TOA(Time of Arrival) using velocity of specific medium and ToF(Time of Flight) to measure a distance, but this method always has a regular error on distance regardless of a real distance, as a result, in far distance, it decrease a error on distance relatively, but in near distance, it increase a error on distance relatively. in this paper, we propose and test new method measuring a distance more precisely in near distance using CSS and RSSI

• ETRI Journal
• /
• 제34권5호
• /
• pp.684-689
• /
• 2012

A mode-singular-value-decomposition (SVD) maximum likelihood (ML) estimation procedure is proposed for the source localization problem under an additive measurement error model. In a practical situation, the noise variance is usually unknown. In this paper, we propose an algorithm that does not require the noise covariance matrix as a priori knowledge. In the proposed method, the weight is derived by the inverse of the noise magnitude square in the ML criterion. The performance of the proposed method outperforms that of the existing methods and approximates the Taylor-series ML and Cram$\acute{e}$r-Rao lower bound.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1861-1867
• /
• 2010

This paper described the positioning algorithm of partial discharge in insulation oil by acoustic method for the application of an on-line diagnosis in oil-immersed transformers. In the experiment, five AE sensors having the resonant frequency of 150 kHz were used, and a signal conditioner was fabricated. A needle-plane electrode system which is composed of a needle with a curvature radius of $10{\mu}m$ and a plane electrode with a diameter of 60 mm was installed to simulate partial discharges in insulation oil. From the time difference of arrival (TOA) of acoustic signal, we calculated the location of partial discharge in insulation oil. In the experiment, an algorithm of positioning of PD occurrence by the time difference of arrival was proposed. From the experimental results, the positioning error of PD calculated by three AE sensors was within 4%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권6호
• /
• pp.2132-2143
• /
• 2015

This paper presents two distance geometry-based algorithms for wireless location in cellular network systems-distance geometry filtering (DGF) and distance geometry constraint (DGC). With time-of-arrival range measurements, the DGF algorithm estimates the mobile station position by selecting a set of measurements with relatively small NLOS (non-line-of-sight) errors, and the DGC algorithm optimizes the measurements first and then estimates the position using those optimized measurements. Simulation results show that the proposed algorithms can mitigate the impact of NLOS errors and effectively improve the accuracy of wireless location.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.62-70
• /
• 1995

The inner pulley is automobile component used as airconditioner clutch assembly. in cold forging of the inner pulley . the design conditions are the same between inner length and outer length, the uniform hardness and the no shape change in inner fillet radius due toa piercing. In industries, the design of forging processes is performed based on an experience-oriented technology, that is, designer's experiences and expensive trial and error. Using the rigid -plastic finite element simulation, we propose the optimal process conditons and design of preform or redesign of final product shape without defects prodicted by metal flow, distribution fo strain, forging load during forging processes form initial workpiece to final product.

• BMB Reports
• /
• 제37권6호
• /
• pp.715-719
• /
• 2004

The fate of Telfairia occidentalis seed Agglutinin, TOA, has been monitored during germination. While the level of the Agglutinin in the cotyledons decreased sharply in the first three days to about half of the initial level, it stabilises at this level for the following twelve days. In this interval, Agglutinin activity becomes manifest in the radicle on the fourth day, peaking on the fifth and decreasing rapidly thereafter. In the plumule, the lectin activity becomes manifest on the sixth day, peaks on the seventh and decreases rapidly thereafter. No lectin activity is detectable in any plant tissue including the rump of the cotyledons twenty-seven days after germination. The implications of these observations on the possible role of lectins in plants are discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.3050-3065
• /
• 2016

Neural networks (NNs) are extensively used in applications requiring signal classification and regression analysis. In this paper, a NN based threshold selection algorithm for 60 GHz millimeter wave (MMW) time of arrival (TOA) estimation using an energy detector (ED) is proposed which is based on the skewness, kurtosis, and curl of the received energy block values. The best normalized threshold for a given signal-to-noise ratio (SNR) is determined, and the influence of the integration period and channel on the performance is investigated. Results are presented which show that the proposed NN based algorithm provides superior precision and better robustness than other ED based algorithms over a wide range of SNR values. Further, it is independent of the integration period and channel model.