• Journal of Microbiology
• /
• v.43 no.2
• /
• pp.172-178
• /
• 2005

To determine the prevalence and genotypes of $\beta$-lactamases among clones of a metagenomic library from the cold-seep sediments of Edison seamount (10,000 years old), we performed pulse-field gel electrophoresis, antibiotic susceptibility testing, pI determination, and DNA sequencing analysis. Among the 8,823 clones of the library, thirty clones produced $\beta$-lactamases and had high levels of genetic diversity. Consistent with minimum inhibitory concentration patterns, we found that five ($167\%$) of thirty clones produced an extended-spectrum $\beta$-lactamase. 837- and 259-bp fragments specific to bla$_{TEM}$ genes were amplified, as determined by banding patterns of PCR amplification with designed primers. TEM­1 was the most prevalent $\beta$-lactamase and conferred resistance to ampicillin, piperacillin, and cephalothin. TEM-116 had a spectrum that was extended to ceftazidime, cefotaxime, and aztreonam. The resistance levels conferred by the pre-antibiotic era alleles of TEM-type $\beta$-lactamases were essentially the same as the resistance levels conferred by the TEM-type alleles which had been isolated from clinically resistant strains of bacteria of the antibiotic era. Our first report on TEM-type $\beta$-lactamases of the pre-antibiotic era indicates that TEM-type $\beta$-lactamases paint a picture in which most of the diversity of the enzymes may not be the result of recent evolution, but that of ancient evolution.

• Applied Microscopy
• /
• v.50
• /
• pp.21.1-21.3
• /
• 2020

Sample preparation is significantly important to the high-resolution transmission electron microscopy (HRTEM) characterization of nanomaterials. However, many general organic solvents can dissolve the necessary organic polymer support layer in TEM grid, which causes it difficult to obtain high-quality samples of oil-soluble nanomaterials. In this study, a new sample preparation method for oil-soluble nanomaterials has been developed by using the sublimable material as a transition layer. Experiments also show that there is no damage to TEM grids and high-quality HRTEM images can be obtained via this method. This approach paves the way to applicable HRTEM sample preparation of oil-soluble nanomaterials.

• Journal of Veterinary Clinics
• /
• v.27 no.2
• /
• pp.125-129
• /
• 2010

A 2-year-old female Pomeranian dog was referred with multiple pelvic fractures. The surgical correction was performed for the fractures. However, after the surgery, purulent exudation was occurred in the surgical site. Antibiotic susceptibility test revealed that the isolated bacteria are resistant to penicillins, cephalosporins, aminoglycosides, quinolones, and trimethoprim/sulfamethoxazole. Bacterial identification and extended-spectrum $\beta$-lactamase (ESBL) confirming test indicated that the isolated bacteriae is ESBL-producing Klebsiella pneumoniae. Minimum inhibitory concentration (MIC) and maximum bactericidal concentration (MBC) tests revealed that meropenem, one of carbapenems, is the only effective antibiotic. The patient was treated with meropenem for 5 days. After 10 days, the exudation was disappeared and the infection was cured. The molecular typing of the ESBL revealed that TEM-1 ESBL is present in the bacteria isolated from the patient. The bacteria isolated from the owner's palm also revealed that TEM-1 and SHV-1 ESBLs are present.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.773-776
• /
• 2013

We have prepared 1-D BiSI and 2-D BiOI nanostructures, and characterized them by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction crystallography, thermogravimetric analysis/differential scanning calorimetry, and UV-visible absorption. Here, we first report clear HR-TEM image of BiSI. In addition, we first found that the growth direction of BiSI is [12-1] plane, with the neighboring distance of 0.30 nm. The crystal structures of BiSI and BiOI are found to be orthorhombic (Pnam) and tetragonal (P4/nmm), respectively. The absorption band gaps of BiSI and BiOI are measured to be 1.55 and 1.92 eV, respectively. Our study could further highlight the applications of V-VI-VII compounds.

• Korean Journal of Veterinary Service
• /
• v.36 no.2
• /
• pp.73-78
• /
• 2013

This study was conducted to investigate antibiotic resistance among Salmonella Typhimurium isolates from diseased pigs in Gyeongbuk province during the period 1998~2011. One hundred forty one isolates were tested for antibiotic resistance using the standard disk diffusion method and were examined for presence of resistance gene by PCR method. S. Typhimurium showed high drug resistance rates to tetracycline (95.7%), streptomycin (93.6%), ampicillin (86.5%), cephalothin (80.1%), gentamicin (79.4%), and trimethoprim/sulfamethoxazole (72.3%). Resistance gene, blaTEM, blaPSE1, tetA, tetB, tetG, sul1, sul2, aadA, strA, grm, and temA were detected among the antibiotic resistance isolates and temB, tetC, aadB gene were not detected. One hundred twenty one (89.6%) tetA, two (1.5%) tetB and one (0.7%) tetG gene were detected in the 135 tetracycline resistant isolates. Two (1.6%) temA gene were detected in one hundred twenty two ampicillin resistance isolates and temB was not detected.

• Journal of Life Science
• /
• v.20 no.5
• /
• pp.676-682
• /
• 2010

This study focused on typing of the extended-spectrum $\beta$-lactamase (ESBL) produced in organisms isolated from a natural environment, rather than a clinical setting. Samples were collected from drain water issuing from a sewage plant in Kwanganri (Busan, Korea). Following double disk synergy testing, 29 strains were selected as potential ESBL positive strains. Of these, 15 strains were transconjugants of the sodium azide resistant recipient strain Escherichia coli J53 and analyzed biochemically including indole, methyl-red, Voges-Proskauer, Simmon's citrate, decarboxylase-dihydrolase and sugar-fermentation tests. The tests classified the 15 strains as Klebsiella pneumoniae (n=13) and Escherichia coli (n=2). The type of ESBL from each strain was deduced by isoelectric focusing point analysis and DNA sequencing. The results indicated that the types of ESBL were SHV-12 (n=4) and SHV-12/TEM-1 (n=9) from K. pneumoniae and TEM-1 (n=2) from E. coli strains.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4723-4728
• /
• 2014

In this study, a thermoelectric module (TEM) and a diesel engine were modeled using 1-D commercial software AMESim, and the performance of the TEM was evaluated when the engine was operated under the NEDC driving cycle. The goal of TEM modeling was to investigate not only the waste heat recovery (WHR) rate and energy converting efficiency, but also the heat transfer rate by taking the materials characteristics into account. In addition, a diesel oxidation catalyst (DOC) was designed, and it was found that the waste heat recovery with TEM affects the activation of DOC and alters engine exhaust composition. The simulation indicated that the WHR using TEM is beneficial for decreasing the fuel consumption of vehicles, but the reduction in the exhaust temperature affects the activation of DOC, resulting in an approximately 14% increase in CO and HC emissions. Therefore, the effect of waste heat recovery on the automotive emission characteristics must be considered in the development of automotive engine WHR systems.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.19-24
• /
• 2017

In these days, increase requirement of TEM (Transmission Electro Microscope) in not only scientific field but also industrial field. Because TEM can measure inner-structure of specimen a variety of materials like metal, bio. etc. When use TEM, specimen should be thin about 50nm. So making for thin specimen, use Ion milling device that include specimen holder. The holder generally made of Aluminium Aluminium holder is worn away easily. For this reason, using time of ion milling with aluminum holder is too short. To solve the problem, we replace aluminium holer to molybdenum alloy holder. In this paper, we design molybdenum alloy holer for CAM and modify CAD modeling for effective machining process. So we array a specimen 3 by 4 and setup orientation for one-shot machining process. Next we make a CAM program for machining. we making a decision two machining strategy that chose condition of tool-path method, step-down, step-over. etc. And then conduct machining using CNC milling machining center. To make clear difference between case.1 and case.2, we fixed machining conditions like feed-rate, main spindle rpm, etc. After machining, we confirm the condition of workpiece and analysis the problems case by case. Finally, case.2 work piece that superior than case.1 cutting with WEDM because that method can not ant mechanical effect on workpiece.

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.1
• /
• pp.1-12
• /
• 1995

옥천 변성대 남서부 지역에서 산출되는 변성 니질암에서는 muscovite, biotite 및 chlorite를 주로하는 phyllosilicate가 서로 intergrowth 또는 interlayer를 이루는 것이 편광현미경 관찰, EPMA 분석, Back Scattered Electron (BSE) image 관찰 및 Transmission Electron Micro-scope(TEM) 관찰을 통하여 확인되었다. 이들 광물들은 편광현미경 관찰에서 흔히 각각의 입자를 식별할 수 없을 정도의 미세 규모로 서로 intergrow 되어 있으며BSE image에서는 0.1$\mu\textrm{m}$ 이하의 아주 작은 크기에서부터 10.0$\mu\textrm{m}$ 정도 크기까지 다양한 규모의 intergrow를 형성하고 있음이 관찰되었다. TEM scale에서는 개별 layer 크기(약 10$\AA$)에서부터 수십 개 layer 크기의 interlayering을 보여준다. 이와 같은 intergrowth 또는 interlayering의 결과로 EPMA 분석에서 종종 보기에는 규진(homogeneous)한 입자라 하더라도 두 개 이상의 광물 성분이 섞여 있는 분석값을 나타내며 이러한 nonstoichiometry는 BSE image에서 interlayer(또는 intergrow) 된 것으로 관찰되는 부분에서 더욱 두드러진다.Chlorite zone에서는 chlorite와 muscovite의 interlayering (C/M)이 주로 발견되며 biotite zone과 garnet zone에서는 chlorite와 biotite의 interlayer (C/B)가 주로 관찰된다. 이는 chlorite zone에서는 속성작용에서 보편적으로 나타나는 C/M으로부터 chlorite가 분리되는 광물반응이 일어나는데 반해서 biotite zone과 garnet zone에서는 chlorite로부터 C/B를 거쳐 biotite를 생성하는 광물반응이 일어나는 것을 의미한다. 이와 같은 현상은 변성작용에서 phollosilicate의 광물반응의 엄밀한 의미에서는 평형(equilibrium) 상태에서 균질한 광물을 생성하기보다는 비평형(disequilibrium) 반응으로 일어난다는 것을 의미한다.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.135-140
• /
• 2003

The difference in lattice parameter and thermal expansion coefficient between GaN and Si which results in many defects into the grown GaN is larger than that between GaN and sapphire. In order to obtain high quality GaN films on Si substrate, it is essential to understand growth characteristics of GaN. In this study, GaN layers were grown on Si(111) substrates by MOCVD at three different GaN growth temperatures ($900^{\circ}C$, $1,000^{\circ}C$ and $1,100^{\circ}C$), using AlN and LT-GaN buffer layers. Using TEM, we carried out the comparative investigation of growth characteristics of GaN by characterizing lattice coherency, crystallinity, orientation relationship and defects formed (transition region, stacking fault, dislocation, etc). The localized region with high defect density was formed due to the lattice mismatch between AlN buffer layer and GaN. As the growth temperature of GaN increases, the defect density and surface roughness of GaN are decreased. In the case of GaN grown at $1,100^{\circ}$, growth thickness is decreased, and columns with out-plane misorientation are formed.