• 대한화학회지
• /
• 제53권5호
• /
• pp.505-511
• /
• 2009

본 논문에서는 구조가 간단하고 생체분야에 응용 가능한 valine, alanine등의 아미노산 분자를 이용하여 수용성 ZnS 나노입자를 합성하였다. 얻어진 고체 생성물들은 XRD, HR-TEM, 및 EDXS분석으로 그 특성을 조사하였다. HR-TEM image 분석의 결과 크기가 대략 3.3에서 3.6 nm 의 입자들이 만들어 졌음을 확인 할 수 있었으며, 나노 입자 표면의 아미노산 분자들은 FT-IR 과 FT-Raman spectrum 을 얻어 결합 모드 등을 분석하였다.

• Elastomers and Composites
• /
• 제58권4호
• /
• pp.208-215
• /
• 2023

In this study, the properties of polyurethane-polydimethylsiloxane (PU-PDMS) hybrid foams containing different types and contents of physical blowing agents (PBAs) were investigated. Two types of blowing agents, namely physical blowing agents and thermally expandable microspheres (TEM), were applied. The apparent density was measured using precisely cut foam samples, and the pore size was measured using image software. In addition, the microstructure of the foam was confirmed via scanning electron microscopy and transmission electron microscopy. The thermal conductivities related to the microstructures of the different foams were compared. When 0.5 phr of the hydrocarbon-based PBA was added, the apparent density and pore size of the foam were minimal; however, the pore size was larger than that of neat foam. In contrast, the addition of 3 phr of TEM effectively reduced both the apparent density and pore size of the PBAs. The increase in resin viscosity owing to TEM could enhance bubble production stability, leading to the formation of more uniform and smaller pores. These results indicate that TEM is a highly efficient PBA that can be employed to decrease the weight and pore size of PU-PDMS hybrid foams.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.101-105
• /
• 2015

Numerous digital image analysis techniques have been developed with regard to transmission electron microscopy (TEM) with the help of programming. DigitalMicrograph (DM, Gatan Inc., USA), which is installed on most TEMs as operational software, includes a script language to develop customized software for image analysis. Based on the DM script language, this work provides a script source listing for quantitative strain measurements based on a geometric phase analysis.

• 한국광물학회지
• /
• 제24권4호
• /
• pp.313-320
• /
• 2011

강원도 태백지역에 분포하는 만항층 셰일의 운모류 층상규산염광물입자에 대한 EPMA 및 TEM 연구를 수행하였다. EPMA 분석에 의한 만항층 셰일 내 운모류 층상규산염광물의 평균 화학식은 $K_{1.35}(Fe_{0.18}Mg_{0.03}Al_{3.86})(Si_{6.55}Al_{1.45})O_{20}(OH)_4$이며, 이는 백운모의 이상화학식과 비교하면 층간 양이온인 K의 함량이 낮아서 일라이트에 가까운 조성을 갖는다. X-선 회절 분석에 의하면 만항층 셰일에서 파이로필라이트가 흔히 백운모와 함께 산출된다. TEM 격자상 관찰에 의하여 $10{\AA}$의 백운모와 $9.3{\AA}$의 파이로필라이트 층들이 단일 층 수준에서의 층간 혼합 및 층 내 혼합 현상이 동시에 관찰되었다. EPMA 분석에서 K 함량이 백운모에 비해 낮게 분석된 원인은 이처럼 입자 내에서 백운모와 파이로필 라이트가 밀접하게 공존하기 때문으로 판단된다.

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 1994년도 제25회 학술대회 연제 초록
• /
• pp.31-31
• /
• 1994

• 대한화학회지
• /
• 제56권4호
• /
• pp.484-490
• /
• 2012

The tin (IV) oxide nanoparticles are prepared by controlled precipitation method and calcined at temperatures of $200-600^{\circ}C$. The prepared $SnO_2$ nanoparticles characterized by XRD patterns, TEM image, IR and UV-Vis spectra. The XRD patterns and TEM image show the tetragonal structure and spherical morphology for $SnO_2$ nanoparticles, respectively. The photocatalytic activity of the prepared $SnO_2$ nanoparticles studied in degradation reaction of methylene blue (MB). The results show the size of nanoparticles, band-gap energy and photocatalytic activity of $SnO_2$ depends on the calcinations temperature. The $SnO_2$ nanoparticles calcined at $500^{\circ}C$ indicated the highest photoreactivity. Also, the zero-valent tin (ZVT) nanoparticles with tetragonal structure are prepared by a reducing agent and used as a catalyst in degradation of MB. In basic pH of 11, the degradation >95% of MB at time 150 min obtained at presence of ZVT nanoparticles.

• 한국재료학회지
• /
• 제4권2호
• /
• pp.127-135
• /
• 1994

직접 접합된 Si 기판들의 접합계면에 관하여 연구하였다. 경사 연마 및 결함묘사, 계면의 비등방성 식각, TEM 및 HR-TEM 등의 방법들을 이용하여 접합계면에 발생하는 계면결함과 과도영역, 여러형태의 void 들, 계면 산화막의 형성 및 안정화 과정등을 조사하였다. 또한 접합된 $Si-Sio_{2}$계면과 일반적인 $Si-Sio_{2}$계면의 형상등을 비교 검토하였다.

• Applied Microscopy
• /
• 제28권1호
• /
• pp.121-126
• /
• 1998

Detailed studies of high resolution TEM inages on the modulated structure caused by Zn vacancy ordering along [110] direction in BZT sintered at $1400^{\circ}C$ for 90 hours had revealed that the images which had hexagonal patterns were similar to those obtained from the structure which had no modulation, These images had appeared over the wide ranges from -30 nm to -42 nm in defocus values and from 2 nm to 20 nm in thickness. The computer simulated images showed that the modulation due to Zn vacancy ordering had made a small change in contrast in the interior of hexagonal pattern, which was very difficult to differenciate in experiments. The image which demonstrated the modulated structure very well was the one which obtained at -52 nm in defocus value and 16 nm in thickness.

• Applied Microscopy
• /
• 제48권1호
• /
• pp.1-5
• /
• 2018

Cryo-transmission electron microscopy (cryo-TEM) allows us to perform structural analysis of a analyses of large protein complexes, which are difficult to analyze using X-ray crystallography or nuclear magnetic resonance. The most common examples of proteins used are ribosomes and proteasomes. In this paper, we briefly describe the advantage of cryo-TEM and the process of two-dimensional classification by considering a human proteasome as an example.

• Journal of the Korean Wood Science and Technology
• /
• 제35권2호
• /
• pp.9-15
• /
• 2007

A comparative study of the structure and organization of the primary and secondary walls in different types of tropical plant waste fibers was carried out using transmission electron microscopy (TEM). The thickness of each layer was also measured using Image Analyzer. TEM micrographs haveconfirmed that cell wall structure of all six types of tropical plant waste fibers (empty fruit bunch, oil palm frond, oil palm trunk, coir, banana stem and pineapple leaf) has the same ultrastructure with wood fibre. The fibers consisted of middle lamella, primary and thick secondary wall with different thickness for different types of fibers. The secondary wall was differentiated into a $S_1$ layer, a unique multi-lamellae $S_2$ layer, and $S_3$ layer.