• Journal of Acupuncture Research
• /
• 제17권2호
• /
• pp.209-220
• /
• 2000

Spasticity, an abnormal increase in resting muscle tone, is one of the most common symptoms of stroke, and its management is becoming a major issue in rehabilitation. The aims of this study are to determine the effects of electroacupuncture(EA), TENS and neuromuscular electric stimulation(NMES) on spasticity, as well as the possibility of tissue comliance method as a spasticity scale. 45 stroke patients participated in a study of the effects on hemiplegic spasticity of EA, TENS and NMES. Spasticity was measured by modified Ashworth scale on the upper extremity and tissue compliance measurement, penetration mm/kg, on Susamni(LI10) area at just before and after stimulation, and 30 minutes, 1 hour, 2 hours and 24 hours after stimulation. The acupuncture points were applied to Kokchi(LI11), Susamni(LI10), Hapkok(LI4) and Oegwan(TE5) of the affected limb. The electrodes were placed unilaterally on LI11 to LI10 and TE5 to LI4. EA with biphasic wave, 60Hz, 0.4 msec pulse duration and low intensity was applied continuously for 20 minutes. TENS with high frequency, low intensity was applied. NMES was applied with spasticity program for 20 minutes. Each electric stimulation was done on extensor muscles group of forearm for 20 minutes. EA and NMES groups were found to produce a statistically significant decrease(p〈0.05) of spasticity and these effects lasted up to 30 minutes after stimulation. There was no definite correlation between the modified Ashworth scale and tissue compliance measurement. But tissure compliance method was found to be possible as a quantitative measurement on spasticity. There was no significant correlation between the effects of EA and NMES and the characteristics of patient, but significant correlation between the effects of EA and NMES and the modified Ashworth scale.

• 한국자기학회지
• /
• 제26권2호
• /
• pp.39-44
• /
• 2016

대표적 열전물질인 비스무스 텔루라이드에 자성원자를 도핑한 합금에 대한 구조 및 전자적 그리고 자기적 성질에 관한 연구는 고효율 열전물질의 개발이라는 목적뿐만 아니라 특이한 자기적 상호작용 규명 및 위상절연체 분야에서도 큰 관심을 끌고 있다. 본 연구에서는 희토류 원자로서 매우 국소화된 f 전자를 갖는 Gd이 Bi을 치환하여 도핑된 비스무스 텔루라이드 합금의 자성 안정성을 밀도범함수(Density Functional Theory)에 입각하여 제일원리적으로 연구하기 위하여 모든 전자(all-electron) FLAPW(full-potential linearized augmented plane-wave) 방법을 이용하여 전자구조 계산을 수행하였다. 전자간 교환-상관 상호작용은 일반기울기 근사법(Generalized Gradient Approximation)을 도입하여 계산하였으며, 국소화된 f 전자를 기술하는 데 필요한 Hubbard+U 보정과 스핀-궤도 각운동량 상호작용은 제2 변분법적 방법을 이용하여 고려하였다. 계산 결과, 강자성 안정성을 보이는 Gd 덩치계와 다르게 이 합금은 강자성과 반강자성의 총에너지 차이가 ~1 meV/Gd 정도의 아주 작은 값으로 얻어져서, 그 자성 안정성은 결함이나 strain 등에 의한 구조변화에 민감하게 의존하여 변할 수 있음을 알 수 있었다. 특히 Gd 스핀자기모멘트는 덩치에서의 값에 비해 감소하였고, Gd에 가장 가까운 Te에 유도 자기모멘트가 형성되는 것으로 미루어 Te를 매개로 한 자성상호작용이 자성 안정성을 결정하는 데에 중요한 역할을 하는 것으로 예측할 수 있었다.

• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.630-636
• /
• 2016

In this paper, a novel triple-mode cavity structure, designed for compactness and operating at 850 MHz, is analyzed. A cylindrical dielectric resonator is loaded into a metallic cylindrical cavity. Previous study has been focused on the analysis of the cylindrical dielectric resonator, but in this paper, the effect of the cylindrical metallic cavity has been analyzed. Enclosing the dielectric resonator inside the metallic cavity increases the resonant frequency of the dielectric resonator; however, this increases the quality factor and introduces the possibility of installing coupling screws. The principle of generation of triple-mode was investigated by parametric analysis. The generated triple-mode is TE011 mode and two orthogonally generated HEM121 modes. By adjusting the radius of the dielectric resonator, the height of the dielectric resonator, or the radius of the cylindrical metallic cavity, three modes could be coincided. However, the height of the metallic cavity keeps three modes separated. The mode characteristics of the proposed cavity are analyzed using a full-wave electromagnetic (EM) simulation. The proposed triple-mode cavity could be developed to triple-mode filter using a coupling screw, and the commercial application for the miniaturized filter below 1 GHz could be expected.

• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.90-97
• /
• 1996

A numerical method for scattering of electromagnetic waves from a periodic strip grating over a grounded dielectric slab is considered for TE and TM polarization cases from the viewpoints of both reflection grating problem and leaky wave antenna problem. The analysis is based on a mode expansion method, floquet's theorem, and the method of moments. Numerical results involving some combinations of geometric parameters are presented in terms of complex propagation constant (kd-$\beta$d diagram), radiation pattern, and relative scattered powers of spectral modes. In particular, the relationship between complex propagatio constnat form the viewpoint of leaky wqve antenna problem and Off-bragg and bragg blazing phenomena from the viewpoint of reflecton graing problem is investigated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.128.2-128.2
• /
• 2014

Long-wave infrared detectors using the type-II InAs/GaSb strained superlattice (T2SL) material system with the nBn structure were designed and fabricated. The band gap energy of the T2SL material was calculated as a function of the thickness of the InAs and GaSb layers by the Kronig-Penney model. Growth of the barrier material (Al0.2Ga0.8Sb) incorporated Te doping to reduce the dark current. The full width at half maximum (FWHM) of the 1st satellite superlattice peak from the X-ray diffraction was around 45 arc sec. The cutoff wavelength of the fabricated device was ${\sim}10.2{\mu}m$ (0.12eV) at 80 K while under an applied bias of -1.4V. The measured activation energy of the device was ~0.128 eV. The dark current density was shown to be $1.2{\times}10^{-5}A/cm^2$ at 80 K and with a bias -1.4 V. The responsivity was 1.9 A/W at $7.5{\mu}m$ at 80K and with a bias of -1.9V.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.4-11
• /
• 2005

In this paper, we propose novel optics design for media inside near-field recording (NFR) using hemispherical solid immersion lens (HMS). To obtain strong advantage of data protection and high data capacity simultaneously, HMS based near field optics using aplanatic position of super hemisphere is designed. In this design, to improve small optical tolerance of this aplanatic position, additional aspheric lens surface is added on top of the HMS and it is combined with zoom optics which composed of two single lenses having low numerical aperture (NA). Also, to compensate chromatic aberration which happens seriously in optics using blue laser diode, diffractive optical element is used. Using zoom optics, additional aspheric lens surface, and diffractive optical element together, wavefront aberration and chromatic aberration are effectively reduced in broad range of cover layer thickness and wavelength variation. In addition, In this paper, effect of gap induced aberration is investigated by analyzing different behavior of each TM and TE wave for designed media inside dual-layer NFR optics.

• 정보저장시스템학회논문집
• /
• 제2권1호
• /
• pp.13-20
• /
• 2006

In this paper, we propose novel optics design for media inside near-field recording(NFR) using hemispherical solid immersion lens(HMS). To obtain strong advantage of data protection and high data capacity simultaneously, HMS based near field optics using aplanatic position of super hemisphere is designed. In this design, to improve small optical tolerance of this aplanatic position, additional aspheric lens surface is added on top of the HMS and it is combined with zoom optics which composed of two single lenses having low numerical aperture(NA). Also, to compensate chromatic aberration which happens seriously in optics using blue laser diode, diffractive optical element is used. Using zoom optics, additional aspheric lens surface, and diffractive optical element together, wavefront aberration and chromatic aberration are effectively reduced in broad range of cover layer thickness and wavelength variation. In addition, in this paper, effect of gap induced aberration is investigated by analyzing different behavior of each TM and TE wave for designed media inside dual-layer NFR optics.

• 대한전자공학회논문지TE
• /
• 제37권1호
• /
• pp.35-41
• /
• 2000

본 논문은 디지털 VCR에서 기록 부호화기로 사용하고 있는 24/25 I-NRZI 변조기의 설계를 위하여 구조를 고찰하고, 스펙트럼 규격을 만족하는 구형파의 전폭 값과 표준 데이터(Sine 및 Cosine계수)를 ROM 테이블에 저장하기 위한 비트의 크기를 고찰하였다. ROM 테이블에 저장되는 표준 데이터의 유효 비트 크기와 구형 파의 진폭 값은 출력 스펙트럼의 파일럿 신호에 대한 크기와 변조기의 하드웨어 크기에 영향을 준다. 설계될 24/25 I-NRZI 변조기에서 출력되는 데이터의 스펙트럼을 겸증하기 위해 램덤 패턴(F0,F1,F2)을 이용하여 실험하였으며, 스펙트럼 분석 결과, 최적의 값으로 구형파의 진폭 갑은 0.065이고, 표준 데이터를 ROM에 저장하기 위한 비트의 크기는 3비트임을 알 수 있었다. 또한, 설계된 24/25 I-NRZI 변조기의 하드웨어 기능을 검중하기 위해 프펙트럼 결과를 토대로 먼저 C 모델링하고, Verilog HDL(Cadence Verilog XL)로 코딩하였으며, Synopsys(Library "Samsung KG75")툴을 이용하여 합성하고, 이를 근거로 하드웨어의 크기를 고찰하였다. 이 연구에서 고찰한 24/25 I-NRZI 변조기는 프리코더의 Path방법 등에 대한 구조를 개선하면10,000게이트 이하로 설계할 수 있으며, 현재 실용화되고 있는 디지털 캠코더에 응용할 수 있다.

• 한국전자파학회논문지
• /
• 제16권5호
• /
• pp.455-464
• /
• 2005

본 논문에서는 손실이 있는 전송선로의 전달 임피던스를 적용한 열전형 전압 변환기(TVC)의 모델을 제안하였으며, TVC의 교류-직류 변환 차이를 계산하기 위한 프로그램을 개발하였다. 제안된 TVC는 열전소자(TE)와 열전소자의 측정범위를 확대하기 위한 저항선이 동축형 실린더의 중심에 직선형태로 직렬로 연결되었다. 제안된 TVC의 교류-직류 변환 차이를 실린더의 직경, 열전도도 등의 특성을 적용하여 시뮬레이션 하였다. 시뮬레이션 값이 불확도 이내에서 측정값과 잘 일치하였다. 일치도는 주파수 $40Hz\~10kHz$에서는 $1{\mu}V/V$이하였고, $20kHz\~100kHz$에서는 $5{\mu}V/V$이하였으며, $200kHz\~1MHz$에서는 최대 $12{\mu}V/V$이하의 차이를 보였다.

• 한국항행학회논문지
• /
• 제6권1호
• /
• pp.52-62
• /
• 2002

본 논문에서는 출력단에 Wilkinson 전력결합기 또는 T 접합 전력결합기를 사용한 20 GHz Push-Push FET 유전체 공진기 발진기를 설계 제작하고 그 특성을 조사 연구하였다. 기본 주파수 10 GHz를 억제하고 제 2 고조파 주파수를 이용하는 20 GHz Push-Push 발진기를 $TE_{01{\delta}}$ 모드의 유전체 공진기와 GaAs MESFET를 두께 H = 20 mil(${\varepsilon}_r$=2.52) 테프론기판 위에 장착하는 구조로 설계하고 제작하였다. Wilkinson 전력결합기를 이용하여 제작된 발진기는 20 GHz에서 출력 전력이 5.67 dBm, 기본 주파수 억압특성은 -29.33 dBc, 위상 잡음은 100 kHz offset에서 -105.5 dBc/Hz 특성을 나타내었으며, T 접합 전력결합기 이용하여 제작된 발진기는 20 GHz에서 출력 전력이 -1.17 dBm, 기본 주파수 억압특성은 -17.84 dBc, 위상 잡음은 100 kHz offset에서 -102.2 dBc/Hz 특성을 나타내었다.