• 한국전산구조공학회논문집
• /
• 제36권3호
• /
• pp.173-184
• /
• 2023

강진에 대한 다양한 비선형 거동을 하는 부재요소들로 이루어진 교량시스템의 현재까지의 일반적인 지진취약도 평가방법은 부재-수준에서 평가하는 것이다. 본 연구의 목적 부재-수준의 지진취약도 평가결과로부터 구조시스템을 대표하는 시스템-수준의 지진취약도 평가방법을 개발하는 것이다. 교량의 지진 거동을 일반적으로 교축방향과 교축직각방향으로 구분하기 때문에 본 연구에서도 시스템-수준 지진취약도를 두 방향에 대하여 구분해 평가하였다. 길이 방향에 대한 부재-수준의 지진취약도평가는 교각, 교량받침, 충돌, 교대, 낙교에 대하여 수행하였다. 교축직각 방향에 대해서는 충돌, 교대, 낙교의 손상이 영향을 주지 않으므로 부재-수준의 지진취약도평가는 교각과 교량받침에 대하여만 수행하였다. 다양한 구조부재의 비선형모델을 이용한 지진해석은 OpenSEES 프로그램을 사용하여 수행하였다. 시스템-수준의 지진취약도는 부재-수준 사이의 손상이 직렬연결이라고 가정하고 평가하였다. 교각의 손상이 다른 부재-수준의 손상보다 시스템-수준의 지진취약도에 지배적인 영향을 주는 것을 알 수 있었다. 다시 말하면 가장 취약한 부재-수준의 지진취약도가 시스템-수준의 지진취약도에 가장 지배적인 영향을 주는 것을 의미한다.

• 대한전자공학회논문지TC
• /
• 제46권4호
• /
• pp.77-85
• /
• 2009

본 논문에서는 다중 셀 환경에서 MIMO-OFDM 기반 시스템을 위한 효율적인 시스템 레벨 시뮬레이션 방법을 제안한다. 실제 시스템에서 셀의 구조, 라디오 채널의 특성, 사용자의 이동성이 미치는 영향에 대해 분석하며, 특별히 사용자의 이동성에 따른 시스템레벨에서의 성능영향을 채널이득과 이동거리, 두 가지 측면에서 모두 고려한다. 다양한 시스템 환경에 따른 영향을 MIMD-OFDM 구조를 가지는 시스템에 적용하여 수신 SINR을 구하는 과정을 제시한다. 링크레벨 시뮬레이션을 통하여 얻은 수신 SNR에 대한 성능곡선을 기초로 하여, 시스템 환경의 변화에 따른 확장이 용이하고 시뮬레이션 복잡도가 낮은 시스템 레벨 시뮬레이션 방법을 제안한다. 다양한 모바일 셀룰러 환경 파라미터에 따른 성능의 변화가 제안된 시뮬레이션을 통하여 얻어지며 그 결과는 셀 중심에 위치한 기지국과 사용자간의 거리에 따른 패킷오류율을 기반으로 분석된다.

• 전자공학회논문지A
• /
• 제29A권4호
• /
• pp.64-73
• /
• 1992

This paper presents the design of multi-level logic optimization algorithm and the development of the SMILE system based on the algorithm. Considering the fanin constraints in algorithmic level, SMILE performs global and local optimization in a predefined sequence using heuristic information. Designed under the Sogang Silicon Compiler design environment, SMILE takes the SLIF netlist or Berkeley equation formats obtained from high-level synthesis process, and generates the optimized circuits in the same format. Experimental results show that SMILE produces the promising results for some circuits from MCNC benchmarks, comparable to the popularly used multi-level logic optimization system, MIS.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1066-1076
• /
• 2011

The subsystems of HSR train control system in each country has developed and operated till early 2000, however 2001/16/EC ERTMS is issued for inter-operability among European train control systems in 2001. So it is trend that ERTMS/ETCS has been applied to not only low-speed train system but high-speed train system over 300km/h in many countries of Europe. According to the government policies of the Honam HSR, metropolitan HSR and test lines, incoming on-board signal control system has been required caused by speed limit to 160km/h on the ground signal system. As ETCS-Level 1 system has applied in our railways from 2003, so our train control system has depended on foreign technologies. In this paper, we analyzed to localize train control system for being ready to protect foreign policies and obtaining core technologies of HSR train control system for instance ETCS-Level2.

• 한국IT서비스학회지
• /
• 제7권2호
• /
• pp.165-180
• /
• 2008

Although a number of studies concerning the performance of information system (hereafter, IS) have been performed, those in governmental organizations have rarely conducted. Moreover, there were not many that the perceptual level of individuals might have influence on the information system performance actually. This study tried to investigate the causal relationship between personal perceptual level on the operation and performance of IS, as a result of project for public innovation which deployed in a governmental organization. The targeted IS is for task management. Our survey's respondents are real users in a governmental organization. As a result of statistical analysis, the affecting factors, the perceptual level of individuals such as task process standardization, training and system education, and the active participation of manager positively affected system performance. The result of study can provide some implications to the governmental organizations who want to improve the system performance and efficiently operate their own IS for achieving the organizational goals.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.514-520
• /
• 2010

This paper is about control algorithms that bi-direction DC-DC Converter using Super Capacitor and regenerative power from DC feeding system in train. In order to take advantage of regenerative energy efficient, charge and discharge level value of energy storage system serve as an important factor. Respect to output fluctuations of the substation and catenary voltage changing, we offers Charge-Discharge Auto Level Tuning Algorithms to improve system following of Energy Storage System.

• 한국전산구조공학회논문집
• /
• 제35권3호
• /
• pp.149-158
• /
• 2022

교량은 사용년한이 증가함에 따라 노후화로 인해 역학적인 성질과 구조적인 성능이 저하되고, 이로 인해서 강진 시에 내진성능이 저하된다. 교각과 교량받침에 대한 노후화를 몇 가지 단계로 정량화하여 해석모델에 반영하였고, 노후화된 교각과 교량받침에 대하여 부재-수준의 지진취약도를 평가하였다. 교량 시스템의 파괴 메카니즘을 직렬시스템으로 가정하여, 부재-수준의 지진취약도 해석 결과로부터 시스템-수준의 지진취약도를 평가하는 방법을 제안하였다. 노후도에 취약한 부재인 교각과 교량받침에 대하여 5가지 정량적인 노후도(0, 5, 10, 25, 40%)를 가정하여 부재-수준의 지진취약도를 평가하였고, 이 결과로부터 시스템-수준의 지진취약도 평가를 수행하였다. 시스템-수준의 지진취약도는 교량받침 보다는 교각이 지배적인 영향을 줌을 알 수 있었다. 이는 보다 취약한 구조부재의 지진취약도가 전체 교량시스템의 지진취약도에 지배적인 영향을 주는 것을 의미한다.

• Structural Engineering and Mechanics
• /
• 제64권3호
• /
• pp.301-310
• /
• 2017

For further development of passive control systems to dissipate larger seismic energy and prevent the structures from earthquake losses, this paper proposes an innovative two-level control system to improve behavior of chevron braced steel frames. Combining two Knee Braces, KB, and a Vertical Link Beam, VLB, in a chevron braced frame, this system can reliably sustain main shock and aftershocks in steel structures. The performance of this two-level system is examined through a finite element analysis and quasi-static cyclic loading test. The cyclic performances of VLB and KBs alone in chevron braced frames are compared with that of the presented two-level control system. The results show appropriate performance of the proposed system in terms of ductility and energy dissipation in two different excitation levels. The maximum load capacity of the presented system is about 30% and 17% higher than those of the chevron braced frames with KB and VLB alone, respectively. In addition, the maximum energy dissipation of the proposed system is about 78% and 150% higher than those of chevron braced frames with VLB and KB respectively under two separate levels of lateral forces caused by different probable seismic excitations. Finally, high performance under different earthquake levels with competitive cost and quick installation work for the control system can be found as main advantages of the presented system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권4호
• /
• pp.229-236
• /
• 2005

This paper presents a system level architecture evaluation technique that leverages transaction level modeling but also significantly extends it to the realm of system level performance evaluation. A major issue lies with the modeling effort. To reduce the modeling effort the proposed technique develops the concept of worst case scenarios. Since the memory controller is often found to be an important component that critically affects the system performance and thus needs optimization, the paper further addresses how to evaluate and optimize the memory controllers, focusing on the test environment and the methodology. The paper also presents an industrial case study using a real state-of-the-art design. In the case study, it is reported that the proposed technique has helped successfully find the performance bottleneck and provide appropriate feedback on time.

• 자동차안전학회지
• /
• 제12권4호
• /
• pp.61-69
• /
• 2020

As a sales volume of autonomous vehicle continually grows up, regulations on this new technology are being introduced around the world. For example, safety standards for the Level 3 automated driving system was promulgated in December 2019 by the Ministry of Land, Infrastructure and Transport of Korean government. In order to promote the development of autonomous vehicle technology and ensure its safety simultaneously, the regulations on the automated driving systems should be phased in to keep pace with technology progress and market expansion. However, according to SAE J3016, which is well known to classify the level of the autonomous vehicle technologies, the description for classification is rather abstract. Therefore it is necessary to describe the automated driving system in more detail in terms of the 'Level.' In this study, the functions and characteristics of automated driving system are carefully classified at each level based on the commentary in the Informal Working Group (IWG) of the UN WP29. In particular, regarding the Level 4, technical issues are characterized with respect to vehicle tasks, driver tasks, system performance and regulations. The important features of the autonomous vehicles to meet Level 4 are explored on the viewpoints of driver replacement, emergency response and connected driving performance.