• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.242-244
• /
• 2009

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.6
• /
• pp.253-259
• /
• 2003

In this paper, the scattered field from a Pierson-Moskowitz sea surface assumed as the PEC by the Finite-Difference Time-Domain(FDTD) method was computed. A one-dimensional surface used to analysis scattering was generated by using the Pierson-Moskowitz model. Back scattering coefficients are calculated with different values of the wind speed(U) which determine configuration of the Pierson-Moskowitz sea surface. The number of surface realization for the computed field, the point number, and the width of surface realization are set to be 50, 8192, and 128k, respectively. In order to verify the computed values these results are compared with those of small perturbation methods, which show good agreement between them.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.21-24
• /
• 2008

This study proposes a optimized shape of diffuser profile through investigating the scattering and diffusion characteristics of diffusers. The scattering coefficient according to ISO 17497-1 evaluates uniformity of reverberant sound field of late reflections, while the diffusion coefficient according to AES-4id-2001 evaluates polar response of early reflections. Thus both scattering and diffusion characteristics should contribute to design shape of diffusers to maximize physical performance. To find out design method, the previous results on hemisphere diffusers are reviewed. The frequency characteristics of scattering coefficients depended on the structural height of the diffusers, while amount of scattering coefficients depended on the surface coverage density of the diffusers. However absorptive properties also increased with augment of surface coverage density, thus optimum coverage density should be considered. For the directional diffuser, three types of 2D-diffusers are proposed; semicylinder of h=5mm, semi-truncated cone of h=5-25mm and semicylinder of h=25mm. As results, diffusers with the maximum height of 25mm show the highest scattering coefficients, while diffuser of h=5mm shows high scattering coefficients only at the high-frequency bands. Diffusion coefficient will be investigated for diffusive properties of the early reflection.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.558-562
• /
• 2012

As an alternative energy, Dye-sensitized solar cells (DSSCs) have received much attention due to low cost manufacturing procedure and high energy consumption rate. Incorporating scattering centers in the nanocrystalline photoanode or additional scattering layers on the nanocrystalline photoanode is an effective way to enhance the light harvest efficiency of the photoanode and the performance of dye-sensitized solar cells (DSSCs). The light scattering abilities of these scattering layers also depend on the relative sizes and phase of the particles in the layers. A higher surface area is normally obtained using large particle sizes. Therefore, transparent high surface area $TiO_2$ layers and an additional scattering layer consisting of $TiO_2$-Rutile 500 nm paste with relatively larger particles are attractive. In this work, we investigates the applicability of a hybrid $TiO_2$ electrode (or a working electrode with a light scattering layer) in a DSSCs. We fabrication various thin film using $TiO_2$ paste 20 nm and $TiO_2$ paste 500 nm. As a result, the efficiency of the a single structure thin film was 3.35% and the efficiency as scattering layer of hybrid structure thin film was 4.36%, 4.73%.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.79-85
• /
• 2022

Tracers are one of the critical factors for improving the performance of velocimetry. Silver and gold nanoparticles as tracers with localized surface-plasmon resonance are analyzed for their scattering properties. The scattering cross sections, angular distribution of the scattering, and equivalent scattering cross sections from 53° and 1.5° half-angle cones at 532 nm are calculated, with particle sizes in the nanoscale range. The 53° and 1.5° half-angle cones used as examples correspond respectively to the collection cones for microscope objectives in microscopic measurements and camera lenses in macroscopic measurements. We find that there is a transitional size near 35 nm when comparing the equivalent scattering cross sections between silver and gold nanoparticles in water at 532 nm. The equivalent scattering cross section of silver nanoparticles is greater or smaller than that of gold nanoparticles when the particle radius is greater or smaller than 35 nm respectively. When the radius of the plasmonic nanoparticles is smaller than about 44 nm, their equivalent scattering cross sections are at least ten times that of TiO₂ nanoparticles. Plasmonic nanoparticles are promising for velocimetry applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.244-250
• /
• 2002

In this paper, rile scattered field from a random rough perfectly conducting surface by method of moment(MoM) was computed. A one-dimensional random rough surface predetermined statistical properties was generated by a digital computer. The number of surface realization for the computed field and the width of surface realization are set to be 100, 80 λ, respectively. To eliminate the scattering from the ends of the surface, the Gaussian taper function is used. Using Monte Carlo technique, we calculated hi-static scattering and back scattering coefficient. In order to verify the result by MoM we compare the MoM results with those of Kirchhoff approximations, which show good agreement between them.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.11
• /
• pp.1095-1100
• /
• 2000

we have proposed a three-dimensional GLE approach to gas-surface reactive scattering, model H + H $${\rightarrow}$H_2/Si(100)-(2$ ${\times}$1) system, and the implementation of 3D GLE method on the hydrogen on silicon surface has been presented. The formalism and algori thm of the 3D GLE are worked properly in the reactive scattering system. The calculated normal mode frequencies of surface vibrations were almost identical to previous harmonic slab calculations. The reaction probabilities were calculated for two energies. The calculations show that a very large amount of energy is transferred in surface in low energy scattering. Three different types of reaction mechanisms has been observed, which can not be shown in flat and rigid surface models. Further work on the reaction mechanisms and calculations of the vibrational and rotation distributions of products is in progress. The results will be reported elsewhere soon.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.63-69
• /
• 1998

For detailed characterization of scattering losses occurring in VCSEL's distributed Bragg reflectors, we performed scattering experiment and obtained the information about surface roughness through the analysis of a modified transmission matrix method. The various wafers grown for VCSELs were used for the scattering experiment. The fractal surface assumption and extrapolation is used to estimate the scattered intensity near specular angle. The modified transmission matrix method employed in the analysis considers the scattering loss at each interface and calculates the reflectivity efficiently and easily. As a result, the surface roughness ranges from $4{\AA}$ to $10{\AA}$ The reduction of reflectivity due to the scattering amounts to 0.26% in case of $10{\AA}$ roughness.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.134-140
• /
• 2009

In this study, the influence of surface roughness on light scattering from Au pads on a PCB surface was investigated. Angular distributions of light scattered from Au pads with different surface roughness were measured for several incident angles. Diffusely-scattered light could be separated by using the fact that the amount of specularly-scattered light was directly related to surface roughness. The separated diffuse term was curve-fitted with a physics-based model, and then the related scattering parameters were extracted and compared with measured parameters.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.5
• /
• pp.311-317
• /
• 1988

The surface-enhanced Raman scattering(SERS) of methoxybenzonitrile in a silver sol was investigated. All of ortho-, meta-, and para-substituted benzonitriles were found to adsorb on the silver surface via the nitrogen lone pair electrons. The benzene ring of meta derivative seemed likely to stand perpendicular to the silver surface, while the benzene rings of both otho and para derivatives assumed tilted stances with respect to the surface. The SERS technique appeared to be a useful means to study the substituent electronic effects.