• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.3
• /
• pp.316-321
• /
• 2004

In this paper, we have developed a new mounting head system for flip chip. The proposed head system consists of a macro/micro positioning actuator for stable force control. The macro actuator provides the system with a gross motion while the micro device yields fine tuned motion to reduce the harmful impact force that occurs between very small sized electronic parts and the surface of a PCB(printed circuit board). In order to show the effectiveness of the proposed macro/micro chip mounting system, we compared the proposed system with the conventional chip mounting head equipped with a macro actuator only. A series of experiments were executed under the mounting conditions such as various access velocities and PCB stiffness. As a result of this study, a satisfactory voice coil actuator as the micro actuator has been developed, and its performance meet well the specifications desired for the design of the chip mounting head system and show good correspondence between theoretical analysis and experimental results.

• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.52-57
• /
• 2018

Surface dielectric barrier discharge (SDBD), which is widely used to control turbulence in aerodynamics, has a significant effect on the radar cross-section (RCS). A four-way linearly synthesized SDBD air plasma actuator is designed to bolster the plasma effects on electromagnetic waves. The diffraction angle is calculated to predict the RCS because of the periodic structure of staggered electrodes. The simplified plasma modeling is utilized to calculate the inhomogeneous surface plasma distribution. Monostatic RCS shows the diffraction in the plane perpendicular to the electrode array and the notable distortion by plasma. In comparison, the overall pattern is maintained in the parallel plane with minor plasma effects. The trends also appear in the bistatic RCS, which has a significant difference in the observation plane perpendicular to the electrodes. The peaks by Bragg's diffraction are shown, and the RCS is reduced by 10 dB in a certain range by the plasma effect. The diffraction caused by the actuator and the inhomogeneous air plasma should be considered in designing an SDBD actuator for a wide range of application.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.59-61
• /
• 2007

This paper proposes optimized actuator to obtain a improved position control ability and respiratory performance with reduced weight. Respiratory organ uses actuator and controls patient's respiratory air volume. Therefore, actuator decides respiratory performance. Redesign actuator using surface response method. Actuator that is reestablished through 3D-simulations searches whether have suitable characteristic to respiratory organ.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.115-121
• /
• 2001

In micro automation technology, the concurrent realization of a high resolution and a large operating rage has been achieved by a dual actuator, usually called by piggy-back system, conventionally. But, because of its manufacturing cost, the complexity of control, and the limit of overall bandwidth, the contract-free and single servo actuators have been suggested with specific applications. In this paper, we suggest a novel non-contact surface actuator suing combination of the Lorentz force and the magnetized force, and discuss the actuating principles including an analytical approach. Differently from the existing planar system, an operating range of the suggested system can be expanded by an additional attachment of active elements. Therefore, it is estimated to be suitable for the next-generation moving system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.607-612
• /
• 2013

The effect of the flow actuator on the asymmetric vortex structure around the ogive-cylinder body with fineness ratio of 4 flying at the speed of Mach 0.1 at angle of attack of 50 degree is studied. The ogive-cylinder model is developed with the actuator placed near the nose tip and numerically simulated using the in-house CFD code named KFLOW. The numerical simulation employs two different actuator modeling: one is the boundary condition given by blowing normal to the surface and another shearing on the surface. The numerical simulation reveals that response of the vortex structure to the actuation is dependent on the type of modeling as well as the strength and direction of the actuation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.155-160
• /
• 2003

It is very important to make an intensive control of burr and surface roughness in the actuator arm of HDD for personal computer. There are two finishing techniques for actuator arm mechanical and chemical method. Centrifugal barrelling and magnetic deburring are mechanical methods, and electrolysis finish is a chemical method. Centrifugal barrelling and magnetic deburring are widely used due to the excellence in convenience and mass production. In this study, characteristics of surface roughness and deburring effect in magnetic deburring and centrifugal barrelling are investigated, and their performance of finishing is compared.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.21-24
• /
• 1994

A piezoelectric actuator. which is composed of a piezoelectrically driven stator and a rotor, Is made and the characteristics are investigated experimentally is a new ultrasonic actuator which transforms rotary motion to linear one is proposed and proved to work successfully. If an ultrasonic wave is excited to propagate in the stator, particles on the internal surface move elliptically. Since the internal surface is machined as an internal thread and an external thread(rotor) is put into the stator. the external thread is rotated through the friction force and moved in the axial direction. The traveling wave is excited by a piezoelectric element bonded to the stator. This idea is firstly proposed by S. Ueha, et al. in 1987. However, efficiency of their actuator is less than 3%. In this study, in order to improve characteristics of this type actuator, we used various pitches and number of the screw thread, and materials of rotor, and we obtained good charcteristics.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.2
• /
• pp.132-139
• /
• 2000

This paper reports a novel micromachining process based on UV-LIGA process and (110) silicon anisotropic etching for fabrication of a high-aspect-ratio comb actuator. The comb electrodes are fabricated by (110) SILICON comb structure considering the etch-rate-ratio between (110) and (111) planes and lateral etch rate of a beam-type structure. The fabricated structure was$ 400\mum \; thick\; and\; 18\mum$ wide comb electrodes separated by $7\mim$ so that the height-gap ratio was about 57. Also considering resonant frequency of the comb actuator and the frequency-matching between sensing and driving mode for gyroscope application, we designed the number, width, height and length of the spring structures. Electroplated gold springs on both sides of the seismic mass were $15\mum\; wide,\; 14\mum\; thick\; and \; 500\mum$ long. The fabricated comb actuator had resonant frequency ay 1430Hz, which was calculated to be 1441Hz. The proposed fabrication process can be applicable to the fabrication of a high-aspect-ratio comb actuator for a large displacement actuator and precision sensors. Moreover, this combined process enables to fabricate a more complex structure which cannot be fabricate only by surface or bulk micromachining.

• The Journal of Korea Robotics Society
• /
• v.16 no.1
• /
• pp.12-16
• /
• 2021

Attempts are being made to provide various tactile feedbacks to user. In particular, a variety of soft actuators are being inserted into the tactile feedback device to give a more flexible, soft and strong stimulation. In this study, a basic study was performed to utilize a hydraulically amplified self-healing electrostatic (HASEL) actuator as a tactile feedback actuator. The HASEL actuator showed great displacement and force with a simple circuit configuration. In particular, by making the actuator in a circular shape, the angle was reduced and the electrode was arranged in a ring shape to maximize the displacement of the central part. As a result, the HASEL actuator showed a displacement difference according to the input waveform. In addition, in order to use it safely as an actuator for tactile feedback, we covered the surface with silicone and confirmed that the actuator works well. Using these actuators, it will be possible to manufacture a lightweight, portable tactile feedback device.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.905-908
• /
• 1999

In this paper, we present a polysilicon actuator on silicon wafer using surface micromachining technology which employs an electrostatic stepwise driven Scratch Drive Actuator to generate a force that can move an external object. For optical applications, we propose wavelength selector using distributed feedback structures and this micro actuator.