• Current Photovoltaic Research
• /
• v.4 no.4
• /
• pp.140-144
• /
• 2016

In this paper, core-shell structure of nickel/gold (Ni/Au) conductive layer on poly-methyl-methacrylate (PMMA) micro-ball was fabricated and its conduction property was investigated. Firstly, PMMA micro-ball was synthesized by using dispersion polymerization method. Size of the ball was $2.8{\mu}m$ within ${\pm}7%$ deviation, and appropriate elastic deformation of the PMMA micro-ball ranging from 31 to 39% was achieved under 3 kg pressure. Also, 200 nm thick Ni/Au conductive layer was fabricated on the PMMA micro-ball by uniformly depositing with electroless-plating. Adhesion of the conductive layer was optimized with help of surface pre-treatment, and the layer adhered without peeling-off despite of thermal expansion by collision with accelerated electrons. Composite paste containing core-shell structured particles well cured at low temperature of $130^{\circ}C$ while pressing the test chip onto the substrate to make electrical contact, and electrical resistance of the conductive layer showed stable behavior of about $6.0{\Omega}$. Thus, it was known that core-shell structured particle of the Ni/Au conductive layer on PMMA micro-ball was feasible to flexible electronics.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.282-287
• /
• 2017

SU-8 is an epoxy-type photoresist widely used for the fabrication of high-aspect-ratio (HAR) micro-structures in micro-electro-mechanical systems (MEMS). To fabricate highly integrated structures, chemical mechanical polishing (CMP) has emerged as the preferred manufacturing process for planarizing the MEMS structure. In SU-8 CMP, an oxidizer decomposes organic impurities and particles in the CMP slurry remove the chemically reacted surface of SU-8. To fabricate HAR microstructures using the CMP process, the adhesion between SU-8 and substrate material is important to avoid the delamination of the SU-8 film caused by the mechanical-dominant material removal characteristic. In this study, the friction force during the CMP process is measured with a CMP monitoring system to detect the delamination phenomenon and investigate the delamination of the SU-8 film from the silicon substrate under various pressure conditions. The increase in applied pressure causes an increase in the frictional force and wafer-edge stress concentration. The frictional force measurement shows that the friction force changes according to the delamination phenomenon of the SU-8 film, and that it is possible to monitor the delamination phenomenon during the SU-8 CMP process. The delamination at a high applied pressure is explained by the effect of stress distribution and pad deformation. Consequently, it is necessary to control the pressure of polishing, which can avoid the delamination in SU-8 CMP.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.145-146
• /
• 2006

A fluorine-doped diamond-like carbon (F-DLC) stamp which has high contact angle, high UV-transmittance and sufficient hardness, was fabricated using the following direct etching method: F-DLC is deposited on a quartz substrate using DC and RF magnetron sputtering, PMMA is spin coated and patterned using e-beam lithography and finally, O2 plasma etching is performed to transfer the line patterns having 100 nm line width, 100 nm line space and 70 nm line depth on F-DLC. The optimum fluorine concentration was determined after performing several pre-experiments. The stamp was applied successfully to UV-NIL without being coated with an anti-adhesion layer.

• Korean Journal of Veterinary Research
• /
• v.24 no.1
• /
• pp.99-104
• /
• 1984

Authors observed an outbreak of porcine pleuropneumonia at a piggery in Gyeongbug, Korea, which were diagnosed on the ground of clinical and pathological findings with the following results. 1. One hundred and forty weanlings out of 200 ones died suddenly without noticiable signs during the period of 15 days. All of the dead pigs showed formy, blood-tinged discharge from the nose and mouth. 2. Main clinical findings observed from 60 alive pigs from group consisted of fever, cyanosis severe degree of dyspnea and pleuritic friction rub. 3. On hematological observation for typical 5 cases leukocytes showed marked degenerative left shift with leukopenia (10500-13070/cmm), neutropenia (7-13%) and increase in the number of band neutrophils (6-27%). 4. The most prominent and constant pathological changes observed at necropsy for dead or alive pigs consisted of fibrinous pleurisy with partial adhesion, overlying of the pulmonary surface with fibrinous menbrane and necrotic pneumonic lesions with marked edema and congestion of lung parenchyma. 5. From these results the outbreak was considered to be typical porcine pleuropneumonia, although no bacteriological isolation was attempted.

• Molecules and Cells
• /
• v.39 no.10
• /
• pp.762-767
• /
• 2016

Fasciclin II (FasII), the Drosophila ortholog of neural cell adhesion molecule (NCAM), plays a critical role in synaptic stabilization and plasticity. Although this molecule undergoes constitutive cycling at the synaptic membrane, how its membrane trafficking is regulated to ensure proper synaptic development remains poorly understood. In a genetic screen, we recovered a mutation in Drosophila mical-like that displays an increase in bouton numbers and a decrease in FasII levels at the neuromuscular junction (NMJ). Similar phenotypes were induced by presynaptic, but not postsynaptic, knockdown of mical-like expression. FasII trafficking assays revealed that the recycling of internalized FasII molecules to the cell surface was significantly impaired in mical-like-knockdown cells. Importantly, this defect correlated with an enhancement of endosomal sorting of FasII to the lysosomal degradation pathway. Similarly, synaptic vesicle exocytosis was also impaired in mical-like mutants. Together, our results identify Mical-like as a novel regulator of synaptic growth and FasII endocytic recycling.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.3
• /
• pp.223-236
• /
• 2020

In this study, a safety evaluation was conducted to confirm if the Enterococcus faecium CKDB003 strain obtained by selection from a mixed fermentation of fruit and milk is suitable for use as a probiotic. The MIC value for the 10 antibiotics specified in the EFSA guidance was below the acceptable cut-off value. The antibiotic resistance genes aac(6')-li, eatAv, and msr(C) exist by whole genome sequencing, but are in the chromosome and not in the plasmid, thus confirming that there is no possibility of transmission to other microorganisms. It was confirmed that cytolysin (cylA, cylB, cylI, cylL-l, cylL-s, cylM, cylR1, cylR2), aggregation substance (asa1, asp1), collagen adhesion (ace), enterococcal surface protein (esp), endocarditis antigen (efaA), hyaluronidase (hyl) and gelatinase (gelE) were not present in the genome by examining the genes of factors related to virulence. Also, the biochemical analysis showed no toxic enzyme activities, and no virulence genes were detected by the PCR method. Thus, the E. faecium CKDB003 strain can be safely used as a health functional food probiotic, based on the results of the safety assessment.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.136-143
• /
• 2013

Recently, a novel coating method using an aqueous doapmine solution was proposed, the deposited coating was found to have extraordinarily strong-adhesion to numerous materials such as metal and polymers. However, it has suffered from many controversy in scientific fields due to its final structure and deposited mechanisms. Here, we have proposed a new structure for final dopamine product coupling with solid state spectroscopic, thermal behavior, and gas transport behaviors of dopamine coated microporous polyethersulfone membranes. In its final analysis, the results represented that it is a supramolecular aggregated of monomers consisting of 5,6-dihydroxyindoline and its derivative in contrast to previously proposed polymeric structure.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.73-81
• /
• 2013

PURPOSES : In this study, various laboratory tests were performed to investigate basic physical properties of the asphalt concrete which uses wasted vinyl aggregates. METHODS : The thermal conductivity, ultrasonic velocity, Marshall stability, flow, indirect tensile strength were measured according to binder content and wasted vinyl aggregate content. An experimental construction was performed to verify construct ability of the asphalt pavement using the wasted vinyl aggregates. RESULTS : The thermal conductivity and ultrasonic velocity decreased showing insulation effect by mixing more wasted vinyl aggregate, whereas stability and flow increased. The void ratio shows similar value regardless of the mixing ratio. The highest indirect tensile strength was measured at 2.5% of wasted vinyl aggregate content. The construct ability was verified by observing the process of mixing, placing, and compaction and the state of the pavement surface. CONCLUSIONS : The basic properties and construct ability of the asphalt concrete using the wasted vinyl aggregates were verified. The temperature according to pavement depth will be measured to verify the insulation effect of the wasted vinyl aggregates. In addition, amount of snowfall, snowmelt area, and ice adhesion strength will be analyzed quantitively.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.18-26
• /
• 1991

This study was carried out to examine not only the effect and the process of activation of aluminum sulfate for the manufacture of PB and MDF, but also application of the activation treatment to PB and MOF made with MDI adhesive. The results were as follows: 1. For the manufacture of PB, activating effect did not take place Because the low moisture content of 30% in the process of activation treatment made probably insufficient activation. It needs to examine higher moisture content for the uniform and enough activation same as that of MOF. 2. In the case of MOF, Activating effect was excellent, it showed not only better results of MOR 48%, MOE 29%, IB 60% than those of the control but also better dimensional stability. 3. Application of alum activation to the PB and MDF made with MDI adhesive yielded no effects. Maybe it was the reson that the curing mechanism of MDI is different. 4. Modifing the wood surface was the oxidation and wettability was not the variable limiting glueline performance. It is necessary to make a more study about activating reaction.

• Journal of the Korean Vacuum Society
• /
• v.17 no.3
• /
• pp.211-214
• /
• 2008

GaN-based light-emitting diodes (LEDs) of a 405 nm wavelength have been fabricated on a sapphire substrate by metal organic chemical vapor deposition (MOCVD). In order to reflect the photons, which are generated in the InGaN active region and emitted to the backside, to the front surface, a reflection layer was deposited onto the back of the substrate. Aluminum was used as the reflection layer and Al was deposited on the sample followed by Ti evaporation for firm adhesion of the reflection layer to the substrate. The light extraction efficiency was enhanced 52 % by adoption of the Ti-Al reflection layer.