• Korean journal of food and cookery science
• /
• v.17 no.2
• /
• pp.129-138
• /
• 2001

In this study, development of the pine needle flavor oils and their application to foods, especially to traditional Korean foods, were investigated. The pine needle flavor oils were prepared by the autoclaving method, and their volatile flavor components(VFCs) were determined by capillary gas chromatographic method The major flavor components of the pine noddle flavor oil were a -pinene 31.1%, pentane 9.8%, tricyclene 7.5%, camphene 6.8%, hexanal 6.2%, propane 6.0%, ${\beta}$-pinene 5.6%, limonene 3.9%. The acceptability of the pine needle flavor oils, sensory evaluation including a preference test and quantitative descriptive analysis(QDA), of the pine needle flavor oil, a sesame oil, and a blended oil (pine needle flavor oil : sesame oil 50 : 50 v/v) was carried out. The blended oil and sesame oil showed much higher preference scores than the pine needle flavor oil, and blended oil was almost as acceptable as sesame oil(P ＜ 0.05). The results seem to indicate that blended oil can be used as a unique substitution for sesame oil in some foods, especially in some traditional Koran food.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.645-652
• /
• 2019

Phosphor with phosphorus doped with rare earth ions was investigated by searching Sr and Eu phosphors suitable for substitution of Eu ions with similar ionic radius to polyphosphate host. The $NaSr(PO_3)_3$ phosphor was synthesized by the solid state method and the $NaSr(PO_3)_3:Eu^{2+}$ phosphor was prepared by the carbon thermal reduction method. Both of the phosphors were identified by X - ray diffraction. The excitation and emission spectra of $NaSr(PO_3)_3:Eu^{3+}$ increased fluorescence intensity and intensity quenching with increasing $Eu^{3+}$ concentration. The higher the $Eu^{3+}$ concentration in the emission spectrum, the higher the local symmetry of $Eu^{3+}$ environment. The mechanism of concentration quenching, in which fluorescence decreases due to the energy transfer between $Eu^{2+}$ ions with the closest critical distance between $Eu^{2+}$ ions with increasing $Eu^{2+}$ ion concentration, was confirmed in the emission spectrum of $NaSr(PO_3)_3:Eu^{2+}$ concentration. It is possible to change the fluorescent region through the post-processing of single rare earth ion added phosphors, and it is possible to change the fluorescence by applying the energy transfer and concentration quenching mechanism according to the local symmetry of $Eu^{3+}$ will be used for high phosphor development.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.8-15
• /
• 2019

When RC(Reinforced Concrete) structures are exposed to harsh environment, deterioration phenomenon occurs, and the corrosion in rebar due to chloride intrusion is known as representative deterioration, so called chloride attack. In this paper, chloride resistance performance of 2 years aged concrete is evaluated considering 3 levels of water to binder ratio(0.37, 0.42, and 0.47) and 2 levels of substitution ratio of fly ash(0% and 30%). Accelerated chloride diffusion coefficient tests referred to Tang's method, total passed charge tests referred to ASTM C 1202, and compressive strength tests referred to KS F 2405 are performed. With adaptation of the previous test results and the results from this study, time-dependent chloride diffusion characteristics are analyzed for each concrete. The FA(Fly Ash) concrete has higher chloride resistance performance than OPC(Ordinary Portland Cement) concrete. According to the evaluation standard of ASTM C 1202, the FA concrete has "Moderate" grade after 49 days while OPC concrete does "Moderate" grade after 365 days. As the results of time-parameter for chloride diffusion, OPC concrete and FA concrete show the decreasing behavior of time-parameters with increasing water to binder ratio. Also, FA concrete has 1.57~2.74 times of time-parameter than OPC concrete. That's cause is thought that the time-parameter indicates the gradient of decreasing of diffusion coefficient. FA concrete has higher time-parameters than OPC concrete by pozzolanic reaction of FA.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1760-1770
• /
• 2022

Objective: It is crucial to accurately determine the net energy (NE) values of feed ingredients because the NE system is expected to be applied to the formulation of broilers feed. The NE values of 5 wheat and 5 wheat brans were determined in 12-to 14-day old Arbor Acres (AA) broilers with substitution method and indirect calorimetry method. Methods: A total of 12 diets, including 2 reference diets (REF) and 10 test diets (5 wheat diets and 5 wheat bran diets) containing 30% of test ingredients, were randomly fed to 864 male AA birds with 6 replicates of 12 birds per treatment. These birds were used to determine metabolizable energy (ME) (8 birds per replicate) in the chicken house and NE (4 birds per replicate) in the chamber respectively at the same time. After a 4-d dietary and environment adaptation period, growth performance, energy values, energy balance and energy utilization were measured during the following 3 d. Multiple linear regression analyses were further performed to generate prediction equations for NE values based on the chemical components and ME values. The NE prediction equation were also validated on another wheat diet and another wheat bran diet with high correlation (r = 0.98, r = 0.75). Results: The NE values of 5 wheat and 5 wheat bran samples are 9.34, 10.02, 10.27, 11.33, and 10.49 MJ/kg, and 5.37, 5.17, 4.87, 5.06, and 4.88 MJ/kg DM, respectively. The equation with the best fit were NE = 1.968AME-0.411×ADF-14.227 (for wheat) and NE = -0.382×CF-0.362×CP-0.244×ADF+20.870 (for wheat bran). Conclusion: The mean NE values of wheat and wheat bran are 10.29 and 5.07 MJ/kg DM in AA broilers. The NE values of ingredients could be predicted by their chemical composition and energy value with good fitness.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.1
• /
• pp.21-34
• /
• 2023

This study identified the materials and construction methods of 'Old Wall' in 13 villages which were designated as National Registered Cultural Heritage at the time of designation and examined the their structural changes based on field survey. The results are as follows: First, the 'Old Wall' consisted of 10 Soil-Stone Wall and 5 Stone Wall. At the time of designation, Stone Wall, which was built irregularly by dry-construction of natural stones, is similar in shape, but Soil-Stone Wall showed difference by the construction method of making used stones, joints, and faces. Second, the study extracted the changes of 'Old Wall' by repair and examined the changes of construction methods as well as the substitution and addition of materials of structure. The wall-roof was built with cement roof-tile and asbestos slate which have the advantage improve durability and cost-effectiveness. In addition, tile-mouth soil was added to korean traditional roof-tile to prevent rainwater from flowing in. Besides, to improve constructional convenience, the natural stone of the wall-body was replaced with blast stone, float stone and cut stone. Cement block, cement brick and cement mortar were frequently used to repair as well. As Soil-Stone Wall was transformed from irregular pattern-construction to comb pattern-construction and wet-construction was changed to dry-construction, it caused landscape and structural problems. Also, the layer of cement mortar applied to wall-foundation blocked the flow of rainwater that was induced by dry-construction of natural stones. Third, the study regarded that the problem with the repair of 'Old Wall' may occur as it is located in living space, because the owner of the wall could repair for the minor damages without technical knowledge. In addition, it is difficult for repair companies in charge of maintenance of Cultural Heritage to supply local materials, and it is differential construction specifications are not applied.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.239-244
• /
• 2007

In order to investigate the effect of fluorine ion in the $Li_{1-x}FeO_2Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8) cathode material, it was synthesized $Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8, $0.05{\le}y{\le}0.15$) cathode materials at $350^{\circ}C$ for 10hrs using solid-state method. $Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ (Mn/(Mn + Fe) = 0.8, $0.0{\le}y{\le}0.1$ was composed many large needle-like particles of about $1-1.5\;{\mu}m$ and small particles of about 50-100 nm, which were distributed among the larger particles. However, $Li_{1-x}FeO_{1.85}F_{0.15}-Li_xMnO_2$ material showed slightly different particle morphology. The particles of $Li_{1-x}FeO_{1.85}F_{0.15}-Li_xMnO_2$ were suddenly increased and started to be a spherical type of particle shape. $Li/Li_{1-x}FeO_{1.9}F_{0.1}-Li_xMnO_2$ cell showed a high initial discharge capacity of 163 mAh/g and a high cycle retention rate of 95% after 50 cycles. The initial discharge capacity of $Li/Li_{1-x}FeO_{2-y}F_y-Li_xMnO_2$ ($0.05{\le}y{\le}0.15$) cells increased according to the increase of F content. However, the cycleability of this cell was very rapidly decreased when the substituted fluorine content is over 0.1. We suggested that too large amount of F ion fail to substitute into the $Li_{1-x}FeO_2-Li_xMnO_2$ structure, which resulted in the severe decline of battery performance.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.557-564
• /
• 2021

Sr_0.92Y_0.08Ti_1-xV_xO_3-δ (SYTV) with perovskite structure was investigated as an alternative anode to utilize H₂S containing fuels in solid oxide fuel cells. To improve the electrochemical performance of Sr_0.92Y_0.08TiO_3-δ (SYT), vanadium(V) was substituted to titanium(Ti) at the B-site of the SYT perovskites. The SYTV synthesized by the Pechini method was chemically compatible with the YSZ electrolyte without additional by-products formation under the cell fabricating conditions. As increasing V substitution amounts, the oxygen vacancies increased, resulting to increasing ionic conductivity of the anode. The cell performance in pure H₂ at 850 ℃ is 19.30 mW/cm² and 34.87 mW/cm² for a 1 mol.% and 7 mol.% of V substituted anodes, respectively. The cell performance using H₂ fuel containing 1000 ppm of H₂S at 850 ℃ was 23.37 mW/cm² and 73.11 mW/cm² for a 1 mol.% and 7 mol.% of V substituted anodes, respectively.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.3
• /
• pp.285-292
• /
• 2008

Purpose: The present study was performed to evaluate the effect of surface treatment of the cervical area of implant on bone regeneration in fresh extraction socket following implant installation. Materials and methods: The four minipigs, 18 months old and 30 kg weighted, were used. Four premolars of the left side of both the mandible and maxilla were extracted. ${\phi}$3.3 mm and 11.5 mm long US II plus implants (Osstem Implant co., Korea) with resorbable blasting media (RBM) treated surface and US II implants (Osstem Implant co., Korea) with machined surface at the top and RBM surface at lower portion were installed in the socket. Stability of the implant was measured with $Osstell^{TM}$ (Model 6 Resonance Frequency Analyser: Integration Diagnostics Ltd., Sweden). After 2 months of healing, the procedures and measurement of implant stability were repeated in the right side by same method of left side. At four months after first experiment, the animals were sacrificed after measurement of stability of all implants, and biopsies were obtained. Results: Well healed soft tissue and no mobility of the implants were observed in both groups. Histologically satisfactory osseointegration of implants was observed with RBM surface, and no foreign body reaction as well as inflammatory infiltration around implant were found. Furthermore, substantial bone formation and high degree of osseointegration were exhibited at the marginal defects around the cervical area of US II plus implants. However, healing of US II implants was characterized by the incomplete bone substitution and the presence of the connective tissue zone between the implant and newly formed bone. The distance between the implant platform (P) and the most coronal level of bone-to-implant contact (B) after 2 months of healing was $2.66{\pm}0.11$ mm at US II implants group and $1.80{\pm}0.13$mm at US II plus implant group. The P-B distance after 4 months of healing was $2.29{\pm}0.13$mm at US II implants group and $1.25{\pm}0.10$mm at US II plus implants group. The difference between both groups regarding the length of P-B distance was statistically significant(p<0.05). Concerning the resonance frequency analysis (RFA) value, the stability of US II plus implants group showed relatively higher RFA value than US II implants group. Conclusion: The current results suggest that implants with rough surface at the cervical area have an advantage in process of bone regeneration on defect around implant placed in a fresh extraction socket.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.4 no.2
• /
• pp.213-217
• /
• 2001

Purpose: Glycogen storage disease type Ia (GSD Ia) is an autosomal recessive disorder of glycogen metabolism caused by glucose-6-phosphatase (G6Pase) deficiency. The clinical manifestations of G6Pase deficiency include growth retardation, hepatomegaly, hypoglycemia, lactic acidemia, hyperlipidemia and hyperuricemia. Many mutations of this gene have been found worldwide in various ethnic groups, establishing the molecular basis of GSD Ia. To elucidate a spectrum of the G6Pase gene mutations in Korean, we analyzed mutations in Korean patients with GSD Ia. Methods: Both alleles of 9 unrelated GSD 1a patients were studied by PCR and direct DNA sequencing methods. In all patients, GSD 1a was diagnosed by the enzyme assay for the liver biopsy specimen. Results: In Korean, the most prevalent mutation was g727t substitution in exon 5, which has been reported to cause abnormal mRNA splicing: Sixteen out of 18 alleles were found to have this mutation. In addition, we identified one novel mutation, a c611g, converting a proline to an alanine at codon 178. Conclusion: Our findings suggest that a screening for the g727t mutation by noninvasive molecular method can detect most cases of GSD Ia in Korean patients.

• Journal of Animal Science and Technology
• /
• v.57 no.9
• /
• pp.35.1-35.8
• /
• 2015

Background: An experiment was conducted in Vietnam to test the hypothesis that total dry matter (DM) intake and liveweight (LW) gain would increase in a curvilinear manner with increasing amounts of concentrate offered. Method: There were five treatments: a basal diet of Guinea grass fed at 1 % of LW and rice straw fed ad libitum (T0), or this diet supplemented with concentrate at 0.6 (T1), 1.2 (T2), 1.8 (T3), or 2.4 % of LW (T4). The concentrate comprised locally available ingredients, namely cassava chips, rice bran, crushed rice grain, fishmeal, salt, and urea, mixed manually. Results: Concentrate intake increased from T0 to T3, but there was no difference in concentrate intake between T3 and T4. Total feed intake increased in a curvilinear manner from 4.0 to 6.4 kg DM/d as the quantity of concentrate consumed increased. The substitution of concentrate for grass and rice straw increased with increasing consumption of concentrate and was as high as 0.49 kg DM reduction per kg of concentrate consumed. LW gain increased curvilinearly, with significant differences between T0 (0.092 kg/d), T1 (0.58 kg/d) and T2 (0.79 kg/d); but there were no significant differences in LW gain between T2, T3 (0.83 kg/d) and T4 (0.94 kg/d).With increasing amount of concentrate in the diet, the digestibilities of dry matter, organic matter, crude protein, and crude fat increased, but NDF digestibility decreased. Conclusion: Based on these results, young Vietnamese Brahman-cross growing cattle will respond to a locally-sourced concentrate mix offered at a level of up to 1.2 % of LW.