• 대한수학회논문집
• /
• 제30권2호
• /
• pp.65-72
• /
• 2015

The minimum rank mr(G) of a simple graph G is defined to be the smallest possible rank over all symmetric real matrices whose (i, j)-th entry (for $i{\neq}j$) is nonzero whenever {i, j} is an edge in G and is zero otherwise. The corona $C_n{\circ}K_t$ is obtained by joining all the vertices of the complete graph $K_t$ to each n vertex of the cycle $C_n$. For any t, we obtain an upper bound of zero forcing number of $L(C_n{\circ}K_t)$, the line graph of $C_n{\circ}K_t$, and get some bounds of $mr(L(C_n{\circ}K_t))$. Specially for t = 1, 2, we have calculated $mr(L(C_n{\circ}K_t))$ by the cut-vertex reduction method.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.328-332
• /
• 2010

The SLF(Short Line Fault) breaking capability test for high voltage class $SF_6$ GCB(Gas Circuit Breaker) was conducted. Simplified LC resonant circuit test facility was used for SLF breaking test. During test, Test current was measured by Rogwski coil and arc voltage was measured by voltage divider. Arc conductance was calculated by using these test results before 200ns at current zero. Critical arc conductance value at rated voltage 145kV class is about 2.3mS regardless of breaking current magnitude and arc conductance value at rated voltage 170kV class is about 2.6mS.

• Korean Journal of Mathematics
• /
• 제29권4호
• /
• pp.825-831
• /
• 2021

The derivative of a polynomial p(z) of degree n, with respect to point α is defined by D_αp(z) = np(z) + (α - z)p'(z). Let p(z) be a polynomial having all its zeros in the unit disk |z| ≤ 1. The Sendov conjecture asserts that if all the zeros of a polynomial p(z) lie in the closed unit disk, then there must be a zero of p'(z) within unit distance of each zero. In this paper, we obtain certain results concerning the location of the zeros of D_αp(z) with respect to a specific zero of p(z) and a stronger result than Sendov conjecture is obtained. Further, a result is obtained for zeros of higher derivatives of polynomials having multiple roots.

• Journal of applied mathematics & informatics
• /
• 제40권5_6호
• /
• pp.831-842
• /
• 2022

In this work we classified translation invariant surfaces with zero Gaussian curvature in the 3-dimensional Sol Lie group endowed with Lorentzian metric.

• ETRI Journal
• /
• 제44권1호
• /
• pp.117-124
• /
• 2022

In this paper, the performance of precoding-aided differential spatial modulation (PDSM) systems with optimal transmit antenna subset (TAS) selection is examined analytically. The average bit error rate (ABER) performance of the optimal TAS selection-based PDSM systems using a zero-forcing (ZF) precoder is evaluated using theoretical upper bound and Monte Carlo simulations. Simulation results validate the analysis and demonstrate a performance penalty < 2.6 dB compared with precoding-aided spatial modulation (PSM) with optimal TAS selection. The performance analysis reveals a transmit diversity gain of (N_T-N_R+1) for the ZF-based PDSM (ZF-PDSM) systems that employ TAS selection with N_T transmit antennas, N_S selected transmit antennas, and N_R receive antennas. It is also shown that reducing the number of activated transmit antennas via optimal TAS selection in the ZF-PDSM systems degrades ABER performance. In addition, the impacts of channel estimation errors on the performance of the ZF-PDSM system with TAS selection are evaluated, and the performance of this system is compared with that of ZF-based PSM with TAS selection.

• 경영과정보연구
• /
• 제26권
• /
• pp.293-309
• /
• 2008

This study examined the market efficiency of korea stock market by comparing variance ratios(VR) of stock groups which is sorted by market capitalization. We compute variance ratios of KOSPI large capitalization, midium capitalization, and small capitalization for 546 trading days from 2006/01/02 to 2008/04/15. For our study, we also use high frequency data that is; intra-day 1 minute data. The characteristics of variance ratios of stock groups by market capitalization as follows: From 1 to 5 minute interval, variance ratios of three stock group increase far from zero(0). The longer time interval, the more variance ratios decrease, but only large capitalization converge on around zero. This means that the market of large capitalization is more efficient compare to other stock groups. The entire sample period can be divided two sub-period because the impact of sub prime crisis arised from U.S.A. influences Korea stock market. Before sub prime crisis, the VRs of mid cap and small cap do not converge on around zero except large cap although the time interval is longer. After sub prime crisis, the VRs of three stock groups decrease when time interval is longer, but only large cap converge on around zero. We conclude that large cap is more efficient than other stock groups in Korea Stock Market.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권4호
• /
• pp.262-266
• /
• 2014

In this paper, we consider the problem of determining the confidence level in zero-failure reliability sampling plans when the life distribution is Weibull distribution with a shape parameter m and a scale parameter ${\eta}$. We introduce zero-failure reliability sampling plans for Weibull distribution and investigate some characteristics of zero-failure reliability sampling plans. Finally, We propose new guideline for determining the confidence level in zero-failure reliability sampling plans for assuring $B_x-life$.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.306-313
• /
• 2014

Super duplex stainless steels (sDSS) are excellent for use under severely corrosive conditions such as offshore and marine applications like pipelines and flanges. sDSS has better mechanical properties and corrosion resistance than the standard duplex stainless steel (DSS) but it is easier for a sigma phase to appear, which depresses the mechanical property and corrosion resistance, compared to DSS, because sDSS has a higher alloy element than DSS. In addition, sDSS has a feeble ductile-brittle transition temperature (DBTT) because it has a 50% ferrite microstructure. In the actual operating environment, sDSS would be thermally affected by welding and a sub-zero temperature environment. This study analyzed how precipitated sDSS behaves at a sub-zero temperature through annealing heat treatment and a sub-zero tensile test. Six types of specimens with annealing times of up to 60 min were tested in a sub-zero chamber. According to the experimental results, an increase in the annealing time reduced the elongation of sDSS, and a decrease in the tensile test temperature raises the flow stress and tensile stress. In particular, the elongation of specimens annealed for 15 min and 30 min was clearly lowered with a decrease in the tensile test temperature because of the increasing sigma phase fraction ratio.

• 한국재료학회지
• /
• 제31권1호
• /
• pp.29-37
• /
• 2021

Martensitic stainless steel is commonly used in the medical implant instrument. The alloy has drawbacks in terms of strength and wear properties when applied to instruments with sharp parts. 440C STS alloy, with improved durability, is an alternative to replace 420 J2 STS. In the present study, the carbide precipitation, and mechanical and corrosion properties of STS 440C alloy are studied as a function of different heat treatments. The STS 440C alloy is first austenitized at different temperatures; this is immediately followed by oil quenching and sub-zero treatment. After sub-zero treatment, the alloy is tempered at low temperatures. The microstructures of the heat treated STS 440C alloy consist of martensite and retained austenite and carbides. Using EDX and SADP with a TEM, the precipitated carbides are identified as a Cr23C6 carbide with a size of 1 to 2 ㎛. The hardness of STS 440C alloy is improved by austenitization at 1,100 ℃ with sub-zero treatment and tempering at 200 ℃. The values of Ecorr and Icorr for STS 440C increase with austenitization temperature. Results can be explained by the dissolution of Cr-carbide and the increase in the retained austenite. Sub-zero treatment followed by tempering shows a little difference in the properties of potentiodynamic polarizations.

• 한국산학기술학회논문지
• /
• 제5권3호
• /
• pp.204-209
• /
• 2004

금형부품으로 사용되는 STD11과 STS3의 열처리에 따른 물리적 특성을 비교하여 금형부품으로 사용시 약점으로 지적되어온 물성을 개선시키고자 하였다. STS3와 STD11의 잔류 austenite의 측정과 촉진시효변형시험, Charpy 충격시험결을 실시한 결과 목표경도를 얻기 위한 심냉처리의 효과, 작업안정성과 칫수안정성면에서 STD11이 STS3보다 우수한 것으로 나타났다. STS3에서는 심냉처리에 의한 잔류 austenite의 감소량은 크게 나타나지 않았으며 또한, 변형을 최소화시켜야 하는 금형에서는 심냉처리가 필수적이라는 것을 확인하였다.