• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.192-196
• /
• 2004

A combined optimal design problem is discussed taking a 3-D truss structure as a design object. We use descriptor forms for a controlled object and a generalized plant because the structural parameters appear naturally in these forms. We consider not only the minimum weight design problem for the structure, but also the suppression problem of the effect of disturbances for the control system as the purpose of the design. A numerical example shows the validity of combined optimal design of the structure and control systems. We also consider the validity of the sensor-actuator collocation for the control system design in this paper.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.253-259
• /
• 2000

This thesis investigated the behavior of super structure by varying the factors such as the change of pile rigidity, the characteristics of soil and the constraint condition of support. The results of this study are as follows; 1. The pile rigidity in the Fig 3.3 computed by the rotating deformed plane method becomes the elastic range at approximately about 5.1 m (D : 1.0 m) below the ground level. This result is consistent with the previous study that the pile deformation occurs approximately 3 to 6 times pile diameter from the pile head. 2. The values of forces and deformations for the structure-pile system in Y-direction appeared larger than that in X-direction, since the pile rigidity and constraint condition of support were changed as shown Fig.3.5 to 3.8. 3. The current practice for the analysis of structure-pile system has not considered the variation of pile rigidity and the constraint condition of support. So, the analysis of structure-pile system with large difference in super-structure rigidity must includes these factors in both X and Y directions.

• 한국시뮬레이션학회논문지
• /
• 제4권1호
• /
• pp.1-11
• /
• 1995

The model of a FMS (Flexible Manufacturing System) admits to a natural hierarchical decomposition of highly decoupled units with similar structure and control. The FMS fractal architecture model represents a hierarchical structure built from elements of a single basic design. A SES (System Entity Structure) is a structural knowledge representation scheme that contains knowledge of decomposition, taxonomy, and coupling relationships of a system necessary to direct model synthesis. A substructure of a SES is extracted for use as the skeleton for a model. This substructure is called pruned SES and the extraction operation of a pruned SES from a SES is called pruning (or pruning operation). This paper presents a pruning operation called recursive pruning. It is applied to SES for generating a model structure whose sub-structure contains copies if itself as in FMS fractal architecture. Another pruning operation called delay pruning is also presented. Combined with recursive pruning the delay pruningis a useful tool for representing and constructing complex systems.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1383-1391
• /
• 1996

The steady-state response for a coupled structure-acoustic-cavity systme has been investigated by numerical technique using a directly coupled finite element method(FEM) and Boundary Element Method(BEM) model. The Laplace tranformed matrix equations for the structure and the acoustic cavity are coupled directly satisfying the necessary equilibrium and compatibility conditions. The coupled FEM-BEM code is verified by comparing its prediction for an example with known analytical, numerical and experimental results. The example involves a coupled structure-acoustic-cavity system which is a box-type cavity with one end as experimentally excited pinned-pinned plate.

• 한국철도학회논문집
• /
• 제1권1호
• /
• pp.20-29
• /
• 1998

State of the art and current issues related with the RC and PSC structure system for the German magnetic levitation train "Transrapid" were investigated. The German magnetic levitation train adopted a new kind of a structure to enable high-speed transportation, which allows the use of the space over a ground. The loading from Transrapid is light-weight compared with a regular train due to load distribution to a supporting structure. Therefore, Transrapid is considered an economical and efficient transportation system, and is also an environmentally-sustainable structure. In this paper, the structural design and construction technology specific to a magnetic levitation train were discussed, and structural considerations related with an actual operation of the train were pointed out. In addition, the future research area of a magnetic levitation train was proposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 특별세미나 특별세션
• /
• pp.239-252
• /
• 2006

The existing track structure for urban Maglev system is designed for the Maglev vehicles of HSST in Japan and UTM in Korea. The tracks hvaing cross beams for supporting rails are located on bridge girders and have several draw backs. Linimo in Nagoya, Japan, the first commercial urban Maglev line, has separated tracks from a bridge to overcome the previous track structure. However, the Linimo just put the existing track on bridge deck. This study suggests a improved track structure for urban Maglev system and compares the behavior of the new and existing track through static structural analyses. In the improved track, the power collector of a Maglew vehicle is installed parallel to the bridge deck surface, and, thus, the bottom width of the track structure is not limited by the vehicle's width. Therefore, the live load is distributed more effectively by the wide bottom of the track. Also, steel plates instead of steel cross beams are used to support rails, and, thus, the rail's deflection is improved.

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.219-232
• /
• 1998

A lot of difficulties exist in analyzing the structure of a system owing to the complex and organic relations in the systems we face in reality. Focuses have been put on the research of optimal solution in a defined structure, however, on the assumption that the structure of the system has been already defined. With the grasping of the structure as the most prior condition, ISM(Interpretive Structural Modeling) and FSM(Fuzzy Structural Modeling) are suggested as solutions in this paper. ISM uses the systematic application of some elementary notions of graph theory and boolean algebra, FSM uses Fuzzy conception for representing relationship between elements. In FSM, the entries in the relation matrix are taken to value on the interval [0,1] by virtue of a fuzzy binary relation. Numeric examples are used as the actual application as follows.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.393-400
• /
• 2001

State of the art and current issues related with the RC and PSC structure system for the German magnetic levitation train were investigated. The German magnetic levitation train adopted a new kind of a structure to enable high-speed transportation, which allows the use of the space over a ground. The loading from Transrapid is light-weight compared with a regular train due to load distribution to a supporting structure. Therefore, Transrapid is considered an economical and efficient transportation system, and is also an environmentaly-sustainable structure, In this paper, the structural design and construction technology specific to a magnetic levitation train were discussed, and structural considerations related with an actual operation of the train were pointed out. In addition, the future research area of a magnetic levitation train was proposed.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권4호
• /
• pp.434-443
• /
• 1999

In this paper, neural network predictive PID (NNPPID) control system is proposed to reduce the vibration of building structure. NNPPID control system is made up predictor, controller, and self-tuner to yield the parameters of controller. The neural networks predictor forecasts the future output based on present input and output of building structure. The controller is PID type whose parameters are yielded by neural networks self-tuning algorithm. Computer simulations show displacements of single and multi-story structure applied to NNPPID system about disturbance loads-wind forces and earthquakes.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권2호
• /
• pp.22-32
• /
• 2015

본 연구는 MIDAS-Gen을 사용하여 초고층건물에서 단일 아웃리거 구조의 최적위치에 미치는 구조요소의 영향에 대하여 비교분석하고자 하였다. 본 연구에서는 구조해석의 변수로 아웃리거 위치와 전단벽, 아웃리거, 아웃리거와 연결된 외곽기둥, 아웃리거에 연결되지 않은 프레임과 같은 주요한 구조요소의 강성을 설정하였다. 초고층건물에서 단일 아웃리거 구조의 최적위치를 탐색하기 위하여 80층 건물의 최상층에 발생한 수평변위를 고찰하였다. 본 연구 결과로부터 아웃리거의 위치, 전단벽, 아웃리거, 아웃리거와 연결된 외곽기둥, 아웃리거와 연결되지 않은 프레임과 같은 주요한 구조요소의 강성은 단일의 아웃리거 최적 위치에 영향을 주는 것으로 나타났다. 그리고 본 연구 결과는 초고층건물에서 단일의 아웃리거 최적위치를 탐색하기 위한 구조설계 데이터를 취득하는 데 매우 유용할 것으로 기대된다.