• Journal of Family Resource Management and Policy Review
• /
• v.9 no.1
• /
• pp.59-73
• /
• 2005

The purpose of this study was to understand which factors affect on the leisure constraint and leisure attitude of workers, to observe how the factors of leisure constraints affect on the leisure attitude. The subjects of this study were 267 urban workers who are older than 20 years old and resident in Seoul. The periods of this study was from November 15 to December 5. The modified versions of leisure constraint scale and leisure attitude scale were utilized for this study. The results of this study are as follows : First, as a result to compare the average of leisure constraint factors, intrapersonal constraint, which are individual mental status as interest, self-consciousness, uneasiness et at., was founded generally less than interpersonal constraints as personal relationship for leisure activity, or structural constraints as financial, time, information et at., Secondly, it was found that interpersonal constraint was statistically different in age, and that structural constraint was statistically different in sex, education, health status, marital status, income, and career. Thirdly, there were statistically different in cognitive leisure attitude, feeling leisure attitude, and behavioral leisure attitude according to the average monthly income and career. But, it was found that marital status and the five-day workweek system were not statistically different in 3 leisure attitude factors. Finally, 3 leisure constraint factors(intrapersonal, interpersonal, structural) had statistically significant effect on cognitive leisure attitude. Also, intrapersonal leisure constraint and interpersonal leisure constraint had statistically significant effect on feeling leisure attitude and behavioral leisure attitude

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.141-144
• /
• 2007

Given a number of training data, a traditional BPN is normally trained by minimizing the absolute difference between target outputs and approximate outputs. When BPN is used as a meta-model for inequality constraint function, approximate optimal solutions are sometimes actually infeasible in a case where they are active at the constraint boundary. The paper describes the development of the efficient BPN based meta-model that enhances the constraint feasibility of approximate optimal solution. The modified BPN based meta-model is obtained by including the decision condition between lower/upper bounds of a constraint and an approximate value. The proposed approach is verified through a simple mathematical function and a ten-bar planar truss problem.

• International Journal of Contents
• /
• v.6 no.2
• /
• pp.59-68
• /
• 2010

This research looks close the effect of security agent's hierarchical leisure constraint on the leisure motivation and participation based on the Jackson's Model of the hierarchical leisure constraints. This research selected 420 people for sampling, designating security agents who work for security companies located in Seoul in 2009 at present as subjects by utilizing purposive sampling method, but the number of sampling used for ultimate analysis is 356. In this research, reliability analysis's and structural equation modeling's Maximum Likelihood method are used to prove the reliability and validity of questionnaire. By using these research method and procedures, the conclusion of this research is as following. First, intra-personal leisure constraint was affected by interpersonal, structural leisure constraint. Second, leisure motivation was affected negatively by leisure constraint. Third, leisure participation was affected positively by leisure motivation. Synthesizing all things referred above, leisure constraint was affected by inter-personal, structural leisure constraint, and in turn, leisure motivation and leisure participation were affected by its effects. It turned out that leisure motivation has a meaningful effect on leisure participation through leisure participation and adjusting process.

• Management & Information Systems Review
• /
• v.35 no.1
• /
• pp.69-84
• /
• 2016

This study set the research model to examine the correlation between Word-of-Mouth constraint factors, efforts to negotiate pertaining to these, Flow and Word-of-Mouth intent based on the theory of leisure constrain when it comes to the correlation between consumers' Word-of-Mouth constraint factors and Word-of-Mouth. Correlation among the variables were verified in an empirical manner. Results of this study are summarized as follows. After verifying the hypotheses, all the hypotheses were adopted excluding the hypotheses of two results (Hypothesis 1, hypotheses 5). Detailed results regarding this are as follows. First, the following is the effect of the Intrapersonal Constraint and Word-of-Mouth constraint factors on the Word-of-Mouth constraint negotiation effort. Interpersonal Constraint and Structural Constraint exert positive (-) effect on the Word-of-Mouth constraint negotiation effort. In case of Intrapersonal Constraint, negative (-) effect was demonstrated. Thus, this was statistically significant although dismissed from hypothesis verification. Second, the following is the result of examining the structural correlation between Word-of-Mouth constraint negotiation effort, Flow and Word-of-Mouth. Word-of-Mouth constraint negotiation effort exerts positive (-) effect on the Flow, but it was not statistically effective in case of the Word-of-Mouth. Lastly, it is possible to see that the Flow plays the role of a medium since it exerted positive (-) effect on the Word-of-Mouth. Results of this study are expected to provide key theoretical and working level implications as well as general understanding of the Word-of-Mouth constraint factors, consumers' Flow and Word-of-Mouth.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.271-278
• /
• 2002

Structural optimization using improved higer-order convex approximation is proposed in this paper. The proposed method is a generalization of the convex approximation method. The order of the approximation function for each constraint is automatically adjusted in the optimization process. And also the order of each design variable is differently adjusted. This self-adjusted capability makes the approximate constraint values conservative enough to maintain the optimum design point of the approximate problem in feasible region. The efficiency of proposed algorithm, compared with conventional algorithm is successfully demonstrated in the Three-bar Truss example.

• Steel and Composite Structures
• /
• v.2 no.1
• /
• pp.35-50
• /
• 2002

A series of tests on simple-welded plate specimens (SWPS) and T-stub tension specimens simulating some of the joint details in moment frame connections were conducted in this investigation. The effects of weld strength mismatch and weld metal toughness on structural behavior of these specimens were considered under both static and dynamic loading conditions. Finite element analyses were performed by taking into account typical weld residual stress distributions and weld metal strength mismatch conditions to facilitate the interpretation of the test results. The major findings are as follows: (a) Sufficient specimen size requirements are essential in simulating both load transfer and constraint conditions that are relevant to moment frame connections, (b) Weld residual stresses can significantly elevate stress triaxiality in addition to structural constraint effects, both of which can significantly reduce the plastic deformation capacity in moment frame connections, (c) Based on the test results, dynamic loading within a loading rate of 0.02 in/in/sec, as used in this study, premature brittle fractures were not seen, although a significant elevation of the yield strength can be clearly observed. However, brittle fracture features can be clearly identified in T-stub specimens in which severe constraint effects (stress triaxiality) are considered as the primary cause, (d) Based on both the test and FEA results, T-stub specimens provide a reasonable representation of the joint conditions in moment frame connections in simulating both complex load transfer mode and constraint conditions.

• Management & Information Systems Review
• /
• v.33 no.2
• /
• pp.205-223
• /
• 2014

A study of the impact of constraint factors of festival participation and negotiation efforts of festival participant on festival satisfaction. This study reviewed earlier studies about festival and verified an impact of the leisure constraint factors of festival participant and the negotiation efforts on festival satisfaction by considering previous literature. Hypotheses based on literature reviews were analyzed emprically. According to the result of study, in aspect of the relationship between constraint factors of festival participation(intrapersonal constraint, interpersonal constraint, structural constraint) and negotiation efforts of festival participation, both interpersonal constraint and structural constraint have positive influence on constraint negotiation efforts. However, intrapersonal constraint factor influenced negatively. Also, the results revealed that in aspect of the relationship among festival participation, festival experience recognition, and satisfaction, festival participation have positive influence on cognitive and emotional experience and finally satisfaction.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1726-1746
• /
• 2022

This paper presents fracture mechanics analysis results for various cracks located at pressurized water reactor pressure vessel nozzle crotch corners taking into consideration constraint effect. Technical documents such as the ASME B&PV Code, Sec.XI were reviewed and then a fracture mechanics analysis procedure was proposed for structural integrity assessment of various nozzle crotch corner cracks under normal operation conditions considering the constraint effect. Linear elastic fracture mechanics analysis was performed by conducting finite element analysis with the proposed analysis procedure. Based on the evaluation results, elastic-plastic fracture mechanics analysis taking into account the constraint effect was performed only for the axial surface crack of the reactor pressure vessel outlet nozzle with cladding. The fracture mechanics analysis result shows that only the axial surface crack in the reactor pressure vessel outlet nozzle has the stress intensity factor exceeding the low bound of upper-shelf fracture toughness irrespectively of considering the constraint effect. It is confirmed that the J-integral for the axial crack of the outlet nozzle does not exceed the ductile crack initiation toughness. Hence, it can be ensured that the structural integrity of all the cracks is maintained during the normal operation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.165-171
• /
• 2013

Due to the difficulty in considering dynamic load in the view point of a computer resource and computing time, it is common that external load is assumed as ideal static loads. However, structural analysis under static load cannot guarantee the safety of design of the structures under dynamic loadings. Recently, the systematic method to construct equivalent static load from the given dynamic load has been proposed. Previous study has calculated equivalent static load through the optimization procedure under displacement constraints. However, previously reported works to distribute equivalent static load were based on ad-hoc methods. Improper selection of equivalent static loading positions may results in unreliable prediction of structural design. The present study proposes the selection method of the proper locations of equivalent static loads to dynamically applied loads when we consider transient dynamic structural problems. Moreover, it is appropriate to take into account the stress constraint as well as displacement constraint condition for the safety design. But the previously reported studies of equivalent static load design methods considered only displacement constraint conditions but not stress constraint conditions. In the present study we consider not only displacement constraint but also stress constraint conditions. Through a few numerical examples, the efficiency and reliability of proposed scheme is verified by comparison of the equivalent stress between equivalent static loading and dynamic loading.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1579-1586
• /
• 2020

Dissimilar metal joints (DMJs) are more common in the application of piping system of many industries. A 2- D and 3-D finite element analysis (FEA) is carried out on dissimilar metal Single Edged Notch Bending (DMSENB) specimens fabricated from ferritic steel, austenitic steel and Inconel - 182 alloy to study the behavior of DMJs with constraints by using linear elastic fracture mechanics (LEFM) principles. Studies on DMSENB specimens are conducted with respect to (i) dissimilar metal joint width (DMJW) (geometrical constraints) (5 mm, 10 mm, 20 mm, 30 mm and 50 mm) (ii) strength mismatch (material constraints) and (iii) crack lengths (16 mm, 20 mm and 24 mm) to study the DMJ behavior. From the FEA investigation, it is observed that (i) SIF increases with increase of crack length and DMJWs (ii) significant constraint effect (geometry, crack tip and strength mismatch) is observed for DMJWs of 5 mm and 10 mm (iii) stress distribution at the interfaces of DMSENB specimen exhibits clear indication of strength mismatch (iv) 3-D FEA yields realistic behavior (v) constraint effect is found to be significant if DMJW is less than 20 mm and the ratio of specimen length to the DMJW is greater than 7.4.