• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.725-728
• /
• 2004

In this study, the effect of mode II by variation of multilevel loading direction was experimentally investigated in the fatigue crack propagation behavior. To generate mixed-mode I+II loading state, the compact tension shear(CTS) specimen and loading device were used in this tests. The experimental method divided into three steps and three cases that were step I(0$^{\circ}$), step II(30$^{\circ}$, 60$^{\circ}$, 90$^{\circ}$),step III(0$^{\circ}$) and case I(0$^{\circ}$ ⇒ 30$^{\circ}$ ⇒ 0$^{\circ}$), case II(0$^{\circ}$ ⇒ 60$^{\circ}$ ⇒ 0$^{\circ}$), case III(0$^{\circ}$ ⇒ 90$^{\circ}$ ⇒ 0$^{\circ}$). The result of test, the step II affected to the step III in the all case. Specially, The fatigue crack propagation rate was faster and the fatigue life was smaller than of mixed mode I+II(30$^{\circ}$,60$^{\circ}$) due to the effect of mode II in the step III of the case III

• Smart Structures and Systems
• /
• 제30권4호
• /
• pp.353-369
• /
• 2022

In this paper, a new sensor chip with frequency reconstruction range of 2.252 GHz ~ 2.450 GHz is designed and fabricated. On this basis, a self-designed "T-shaped" shell is added to overcome the disadvantage of uneven deformation of the traditional steel shell, and the range of the sensor chip is expanded to 0 kN ~ 96 kN. The liquid metal antenna is used to carry out a step-by-step loading test, and the relationship between the antenna resonance frequency and the pressure load is analyzed. The results show that there is a good linear relationship between the pressure load and the resonant frequency. Therefore, the liquid metal antenna can be regarded as a pressure sensor. The cyclic loading and unloading experiments of the sensor are carried out, and different loading rates are used to explore the influence on the performance of the sensor. The loading and unloading characteristic curves and the influence characteristic curves of loading rate are plotted. The experimental results show that the sensor has no residual deformation during the cycle of loading and unloading. Moreover, the influence of temperature on the performance of the sensor is studied, and the temperature correction formula is derived.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.155-158
• /
• 2003

In this study consolidation back analyses were performed with the data measured in the reservoir construction field. some effects due to gradual step loading were considered carefully in this back analysis. the replacement depth of soft ground was estimated from the difference between the measured and the back analyzed data

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.21-31
• /
• 1994

In this research, tool allocation methods are studied in conjunction with loading and muting in FMSs. The objective function is to minimize production time while maximizing machine utilization of the FMS with several constraints. The proposed method has 2 steps. The first step is to determine tool allocation type with the proposed tool allocation method. The second step is to design loading models with routing. The effectiveness of the proposed FMS operation procedure is shown through numerical examples.

• 한국광학회지
• /
• 제23권6호
• /
• pp.246-250
• /
• 2012

We derive analytical expressions for the output spectral density and the noise power $P_{\beta}$ in noise loading analysis using Volterra kernels to characterize fiber nonlinearities. The bandwidth of the input noise source has little effect on $P_{\beta}$, but the power of the input noise source and the dispersion parameter value of the fiber have a significant effect on $P_{\beta}$. The Volterra method predicts ${\Delta}P_{\beta}[dB]$ = 30 dB/decade, which agrees very accurately over a wide range of fiber parameters compared with the numerical results by the split-step Fourier method. Therefore the Volterra method could be useful to predict the performance of a dense WDM system when we plan to upgrade fiber or increase signal power.

• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.565-589
• /
• 2004

The present paper concerns the macroscopic overall description of rheologic properties for steel wire and synthetic fibre cables under variable loading actions according to non-linear creep and/or relaxation theory. The general constitutive equations of non-linear creep and/or relaxation of tension elements - cables under one-step and the variable stress or strain inputs using the product and two types of additive approximations of the kernel functions are presented in the paper. The derived non-linear constitutive equations describe a non-linear rheologic behaviour of the cables for a variable stress or strain history using the kernel functions determined only by one-step - constant creep or relaxation tests. The developed constitutive equations enable to simulate and to predict in a general way non-linear rheologic behaviour of the cables under an arbitrary loading or straining history. The derived constitutive equations can be used for the various tension structural elements with the non-linear rheologic properties under uniaxial variable stressing or straining.

• Advances in aircraft and spacecraft science
• /
• 제5권3호
• /
• pp.385-400
• /
• 2018

In this paper dynamic behavior (modal analysis and dynamic transient response) of a novel sandwich T-joint is numerically and experimentally investigated. An epoxy adhesive is selected for bonding purpose and making the step wise graded behavior of adhesive region. The effect of the step graded behavior of the adhesive zone on dynamic behavior of a sandwich T-joint is numerically studied. Finite element analysis (FEA) of the T-joints with carbon fiber reinforced polymer (CFRP) face-sheets is performed by ABAQUS 6.12-1 FEM code software. Modal analysis and dynamic half-sine transient response of the sandwich T-joint are presented in this paper. Two verification processes employed to verify the dynamic modeling of the manufactured sandwich panels and T-joint modeling. It has been shown that the step wise graded adhesive zone cases have changed the second natural frequency by about 5%. Also, it has been shown that the different arranges in the step wise graded adhesive zone significantly affect the maximum stresses due to transient dynamic loading by 1112% decrease in maximum peel stress and 691.9% decrease in maximum shear stress on the adhesive region.

• Structural Engineering and Mechanics
• /
• 제13권5호
• /
• pp.569-589
• /
• 2002

In performing the dynamic analysis, the step size used in a step-by-step integration method might be much smaller than that required by the accuracy consideration in order to capture the rapid chances of dynamic loading or to eliminate the linearization errors. It was first found by Chen and Robinson that these difficulties might be overcome by integrating the equations of motion with respect to time once. A further study of this technique is conducted herein. This include the theoretical evaluation and comparison of the capability to capture the rapid changes of dynamic loading if using the constant average acceleration method and its integral form and the exploration of the superiority of the time integration to reduce the linearization error. In addition, its advantage in the solution of the impact problems or the wave propagation problems is also numerically demonstrated. It seems that this time integration technique can be applicable to all the currently available direct integration methods.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.642-647
• /
• 2007

Determination of loading conditions for tube hydroforming(THF) process that implies an amount of the increment in axial feeding and internal pressure for each step is one of the most important constituents at the process design level. On account of the fact that those design factors mentioned above are imposed simultaneously during the process, suitable loading conditions are required to obtain robust products without any failure such as buckling, necking, bursting and so on. In which, especially, bursting is well known as the most frequently occurred failure in general THF process. In this study, therefore, determination of the loading condition based on the adaptive method was carried out to obtain safe loading paths. In addition, forming limit curves are applied to evaluate the derived loading conditions by using the simulation results. Consequently, it is found that described method in this study for THF process design is useful and has a feasibility.

• 대한토목학회논문집
• /
• 제7권4호
• /
• pp.103-113
• /
• 1987

본(本) 연구(硏究)는 단순변동하중하(單純變動荷重下)에서의 피로균열성장거동(疲勞龜裂成長擧動)을 고찰하고 해석방법(解析方法)을 구하고자, 용접구조용강(鎔接構造用鋼) SWS 58을 사용하여 CT 시험편을 제작하고 간단한 하중모델을 설정(設定)하여 피로실험(疲勞實驗)을 행했다. 그 결과 단일과하중작용직후(單一過荷重作用直後)에는 가속효과(加速效果)가 경미(輕微)하게 발생하였으며 그후 상당한 지연효과(遲延效果)가 발생했다. 2단중복하중하(段重復荷重下)에서는 low-high인 경우 약간의 가속효과(加速效果)가 발생하나 high-low인 경우는 상당한 지연효과(遲延效果)가 발생했다. 이러한 하중변화(荷重變化)에 따른 균열성장율(龜裂成長率)(da/dN)은 균열선단(龜裂先端)의 잔류응력(殘留應力)과 소성영역(塑性領域)으로 인한 상호영향(相互影響)때문이며, 이러한 미시적(微視的) 균열성장거동(龜裂成長擧動)은 Elber의 crack closure model로 잘 설명(說明)될 수 있으나 피로균열성장해석방법(疲勞龜裂成長解析方法)으로는 불충분(不充分)하다. 반면 변동하중하(變動荷重下)에서의 피로균열성장해석방법(疲勞龜裂成長解析方法) 중(中) Wheeler의 retardation model은 간편하면서도 적합한 이론임을 알 수 있었다.