Browse > Article
http://dx.doi.org/10.12989/aas.2018.5.3.385

Development of dynamic behavior of the novel composite T-joints: Numerical and experimental  

Mokhtari, Madjid (Department of Aerospace Engineering, Maleke-e-Ashtar University of Technology)
Shahravi, Morteza (Department of Aerospace Engineering, Maleke-e-Ashtar University of Technology)
Zabihpoor, Mahmood (Department of Aerospace Engineering, Maleke-e-Ashtar University of Technology)
Publication Information
Advances in aircraft and spacecraft science / v.5, no.3, 2018 , pp. 385-400 More about this Journal
Abstract
In this paper dynamic behavior (modal analysis and dynamic transient response) of a novel sandwich T-joint is numerically and experimentally investigated. An epoxy adhesive is selected for bonding purpose and making the step wise graded behavior of adhesive region. The effect of the step graded behavior of the adhesive zone on dynamic behavior of a sandwich T-joint is numerically studied. Finite element analysis (FEA) of the T-joints with carbon fiber reinforced polymer (CFRP) face-sheets is performed by ABAQUS 6.12-1 FEM code software. Modal analysis and dynamic half-sine transient response of the sandwich T-joint are presented in this paper. Two verification processes employed to verify the dynamic modeling of the manufactured sandwich panels and T-joint modeling. It has been shown that the step wise graded adhesive zone cases have changed the second natural frequency by about 5%. Also, it has been shown that the different arranges in the step wise graded adhesive zone significantly affect the maximum stresses due to transient dynamic loading by 1112% decrease in maximum peel stress and 691.9% decrease in maximum shear stress on the adhesive region.
Keywords
sandwich T-joints; step wise graded adhesive zone; transient dynamic loading; modal analysis;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Stapleton, S.E., Waas, A.M. and Arnold, S.M. (2012), "Functionally graded adhesives for composite joints", Int. J. Adhes. Adhes., 35, 36-49.   DOI
2 Stapleton, S.E., Weimer, J. and Spengler, J. (2017), "Design of functionally graded joints using a polyurethane-based adhesive with varying amounts of acrylate", Int. J. Adhes. Adhes., 76, 38-46.   DOI
3 Sun, D. and Luo, S.N. (2011), "Wave propagation and transient response of a FGM plate under a point impact load based on higher-order shear deformation theory", Compos. Struct., 93(5), 1474-1484.   DOI
4 Uysal, M.U. and Guven, U. (2015), "Buckling of functional graded polymeric sandwich panel under different load cases", Compos. Struct., 121, 182-196.   DOI
5 Da Silva, L.F.M. and Adams, R.D. (2007b), "Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives", Int. J. Adhes. Adhes., 27(3), 216-226.   DOI
6 Afkar, A. and Camari, M.N. (2014), "Finite element analysis of mono-and bi-adhesively bonded functionally graded adherend", J. Fail. Analy. Prev., 14(2), 253-258.   DOI
7 Andres, L.F.S., Carbas, R.J.C. and Da Silva, L.F.M. (2015), "Effect of carbon black nanoparticles concentration on the mechanical properties of an epoxy adhesive cured by dielectric heating", Microsc. Microanal., 21(S5), 15-16.   DOI
8 Apalak, Z.G., Ekici, R., Yildirim, M. and Apalak, M.K. (2014), "Free vibration analysis of an adhesively bonded functionally graded double containment cantilever joint", J. Adhes. Sci. Technol., 28(12), 1117-1139.   DOI
9 Gunes, R., Apalak, M.K. and Yildirim, M. (2007), "The free vibration analysis and optimal design of an adhesively bonded functionally graded single lap joint", Int. J. Mech. Sci., 49(4), 479-499.   DOI
10 Gunes, R., Apalak, M.K. and Yildirim, M. (2011), "Free vibration analysis of an adhesively bonded functionally graded tubular single lap joint", J. Adhes., 87(9), 902-925.   DOI
11 Gunes, R., Apalak, M.K., Yildirim, M. and Ozkes, I. (2010), "Free vibration analysis of adhesively bonded single lap joints with wide and narrow functionally graded plates", Compos. Struct., 92(1), 1-17.   DOI
12 Hart-Smith, L.J. (1973), Adhesive Bonded Double-Lap Joints, NASA-CR-112236, NASA.
13 Khalili, S.M.R. and Mokhtari, M. (2015), "Numerical study of adhesive single-lap joints with composite adherends subjected to combined tension-torsion loads", J. Adhes., 91(3), 214-234.   DOI
14 Kumar, S. and Scanlan, J.P. (2013), "On axisymmetric adhesive joints with graded interface stiffness", Int. J. Adhes. Adhes., 41, 57-72.   DOI
15 Khalili, S.M.R., Shariyat, M. and Mokhtari, M. (2014), "Static tensile and transient dynamic response of cracked aluminum plate repaired with composite patch-numerical study", Appl. Compos. Mater., 21(3), 441-455.   DOI
16 Kiani, Y., Sadighi, M., Salami, S.J. and Eslami, M. (2013), "Low velocity impact response of thick FGM beams with general boundary conditions in thermal field", Compos. Struct., 104, 293-303.   DOI
17 Kumar, S. (2009), "Analysis of tubular adhesive joints with a functionally modulus graded bondline subjected to axial loads", Int. J. Adhes. Adhes., 29, 785-795.   DOI
18 Kumar, S. and Scanlan, J.P. (2013a), "On axisymmetric adhesive joints with graded interface stiffness", Int. J. Adhes. Adhes., 41, 57-72.   DOI
19 Kumar, S. and Scanlan, J.P. (2013b), "Modeling of modulus graded axisymmetric adhesive joints", J. Adhes. 86, 369-394.
20 Malekzadeh, K., Khalili, S.M.R. and Veysi Gorgabad, A. (2015), "Dynamic response of composite sandwich beams with arbitrary functionally graded cores subjected to low-velocity impact", Mech. Adv. Mater. Struct., 22(8), 605-618.   DOI
21 Malekzadeh, P. and Ghaedsharaf, M. (2014), "Three-dimensional free vibration of laminated cylindrical panels with functionally graded layers", Compos. Struct., 108, 894-904.   DOI
22 Malekzadeh, P. and Monajjemzadeh, S.M. (2013), "Dynamic response of functionally graded plates in thermal environment under moving load", Compos. Part B: Eng., 45(1), 1521-1533.   DOI
23 Olmedo, A. and Santiuste, C. (2012), "On the prediction of bolted single-lap composite joints", Compos. Struct., 94(6), 2110-2117.   DOI
24 Marques, E.A.S. (2013), "Analysis of adhesive joints for aerospace applications", M.Sc. Dissertation, Porto University, Italy.
25 Miyamoto, Y., Kaysser, W.A., Rabin, B.H., Kawassaki, A. and Ford, G.R. (2013), Functionally Graded Materials: Design, Processing and Applications, Springer Science and Business Media, U.S.A.
26 Mokhtari, M. and Shahravy, M. (2017), "Numerical and experimental analysis of dynamical behavior of composite T-joint with step wise graded adhesive zone based on functional behavior model", J. Sci. Technol. Compos. 2(2), 63-76.
27 Raphael, C. (1966), "Variable-adhesive bonded joints", Proceedings of the Applied Polymer Symposium, 3, 99-108.
28 Carbas, R.J.C., Da Silva, L.F.M. and Andres, L.F.S. (2016), "Effect of carbon black nanoparticles concentration on the mechanical properties of a structural epoxy adhesive", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Material, Design and Applications, 232(5), 403-415.
29 Banea, M.D., Da Silva, L.F.M., Carbas, R.J.C. and De Barros, D. (2017), "Debonding on command of multimaterial adhesive joints", J. Adhes., 93(10), 756-770.   DOI
30 Bodaghi, M. and Shakeri, M. (2012), "An analytical approach for free vibration and transient response of functionally graded piezoelectric cylindrical panels subjected to impulsive loads", Compos. Struct., 94(5),1721-1735.   DOI
31 Carbas, R.J.C., Viana, G.M.S.O., Da Silva, L.F.M. and Critchlow, G.W. (2015), "Functionally graded adhesive patch repairs of wood beams in civil applications", J. Compos. Construct., 19(2).
32 Carbas, R.J.C., Da Silva, L.F.M. and Andres, L.F.S. (2017), "Functionally graded adhesive joints by graded mixing of nanoparticles", Int. J. Adhes. Adhes. 76, 30-36.   DOI
33 Carbas, R.J.C., Da Silva, L.F.M. and Critchlow, G.W. (2014), "Adhesively bonded functionally graded joints by induction heating", Int. J. Adhes. Adhes., 48(5), 110-118.   DOI
34 Carbas, R.J.C., Da Silva, L.F.M. and Critchlow, G.W. (2014), "Effect of post-cure on adhesively bonded functionally graded joints by induction heating", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 229(5), 419-430.   DOI
35 Chidlow, S., Chong, W. and Teodorescu, M. (2013), "On the two-dimensional solution of both adhesive and non-adhesive contact problems involving functionally graded materials", Eur. J. Mech. A-Solid., 39, 86-103.   DOI
36 Da Silva, L.F.M. and Adams, R.D. (2007a), "Techniques to reduce the peel stresses in adhesive joints with composites", Int. J. Adhes. Adhes. 27(3), 227-235.   DOI