• Journal of Korean Society for Quality Management
• /
• v.12 no.2
• /
• pp.15-24
• /
• 1984

Since W.A. Shewhart (1931) developed the quality control method using the control chart, many theoretical and empirical works about such an analytical method have been done. However there are two major methods relating to the control chart analysis; the conventional 3 sigma control method and the warning limit method which has been suggested as a modification of the former. The conventional 3 sigma method requires to take a remedial action only when a quality characteristic is beyond the control limit (3 sigma). However, once a quality characteristic is over the control limit, searching and repairing an assignable cause requires time consuming job and high costs. Therefore if we set the warning limit between the central line and the control limit, we will be able to take remedial measures before too late. In spite of its advantage, much attention has not been paid to use the control chart with warning limit in Korean industries. The main object of this study is to examine improvement of quality and productivity when the control chart with warning limit is used.

• Journal of Korean Society for Quality Management
• /
• v.29 no.3
• /
• pp.79-85
• /
• 2001

Estimation of the process deviation is an important problem in statistical process control, especially in the control chart, process capability analysis or measurement system analysis. In this paper we suggest the use of the Gini's mean difference for the estimation of the process deviation when we design the control limits in construction of the control charts. The efficiency of the Gini's mean difference was well explained in Nam, Lee and Jung(2000). In this paper we propose an $\overline{X}$ control chart which use the control limits based on the Gini's mean difference. In various classes of distributions, the proposed control chart shows food performance.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.285-295
• /
• 2004

Statistical process control(SPC) and engineering process control(EPC) are two complementary strategies for quality improvement. An integrated process control(IPC) can use EPC to reduce the effect of predictable quality variations and SPC to monitor the process for detection of special causes. In this paper we assume an IMA(1,1) model as a disturbance process and an occurrence of a level shift in the process, and we consider the economic performance for applying an EWMA chart to monitor MMSE-controlled processes. The numerical results suggest that the IPC scheme in an IMA(1,1) disturbance model does not give additional advantages in the economic aspect.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.114-120
• /
• 2008

The control chart is widely used statistical process control(SPC) tool that searches for assignable cause of variation and detects any change of process. Generally, ${\bar{X}}-R$ control chart and ${\bar{X}}-S$ are most frequently used. When the production run is short and process parameter changes frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. The CV control chart is an effective tool to control the mean and variability of process simultaneously. The CV control chart, however, is not sensitive at small shift in the magnitude of CV. In this paper, we propose an CV-EWMA (exponentially weighted moving average) control chart which is effective in detecting a small shift of CV. Since the CV-EWMA control chart scheme can be viewed as a weighted average of all past and current CV values, it is very sensitive to small change of mean and variability of the process. We suggest the values of design parameters and show the results of the performance study of CV-EWMA control chart by the use of average run length (ARL). When we compared the performance of CV-EWMA control chart with that of the CV control chart, we found that the CV-EWMA control chart gives longer in-control ARL and much shorter out-of-control ARL.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.1
• /
• pp.233-241
• /
• 1999

Control chart is a very extensively used tool in testing whether a process is in a state of statistical control or not. In this paper, we propose a robust EWMA(exponentially weighted moving averages) control chart for variables, which is based on the Huber's M-estimator. The Huber's M-estimator is a well-known robust estimator in sense of distributional robustness. In the proposed chart, the estimation of the process deviation is modified to have a s table level and high power. To compare the performances of the proposed control chart with other charts, some Monte Carlo simulations we performed. The simulation results show that the robust EWMA control chart has good performance.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.3
• /
• pp.773-782
• /
• 2007

The statistical process control charts are very extensively used for monitoring of process mean, deviation, defect rate or reject rate. In this paper we consider a control chart to monitor the process reject rate in the high yield process, which is based on the observed cumulative probability of the number of items inspected until r defective items are observed. We first propose selection of the optimal value of r in the CPC-r charts, and also consider the usefulness of the chart in high yield process such as semiconductor or TFT-LCD manufacturing process.

• Journal of the Korean Statistical Society
• /
• v.23 no.1
• /
• pp.89-102
• /
• 1994

A new method for approximating the average run length (ARL) of cumulative sum (CUSUM) chart is proposed. This method uses the conditional expectation for the test statistic before the stopping time and its asymptotic conditional density function. The values obtained by this method are compared with some other methods in normal and exponential case.

• Communications for Statistical Applications and Methods
• /
• v.4 no.3
• /
• pp.715-723
• /
• 1997

Multivariate control statistics to simultaneously monitor both means and variances for several quality variables under multivariate normal process are proposed. Performances of the proposed multivariate charts are evaluated in terms of average run length(ARL). Multivariate Shewhart chart is also proposed to compare the performances of multivariate exponentially weighted moving average(EWMA) charts. A numerical comparison shows that multivariate EWMA charts are more efficient than multivariate Shewhart chart for small and moderate shifts and multivariate EWMA scheme based on accumulate-combine approach is more efficient than corresponding multivariate EWMA chart based on combine-accumulate approach.

• Communications for Statistical Applications and Methods
• /
• v.19 no.5
• /
• pp.685-696
• /
• 2012

These days the interest of quality leads to the necessity of control charts for monitoring the process in various fields of practical applications. The $\overline{X}$ chart is one of the most widely used tools for quality control that also performs well under the normality of quality characteristics. However, quality characteristics tend to have nonnormal properties in real applications. Numerous recent studies have tried to find and explore the performance of $\overline{X}$ chart due to non-normality; however previous studies numerically examined the effects of non-normality and did not provide any theoretical justification. Moreover, numerical studies are restricted to specific type of distributions such as Burr or gamma distribution that are known to be flexible but can hardly replace other general distributions. In this paper, we approximate the false alarm rate(FAR) of the $\overline{X}$ chart using the Edgeworth expansion up to 1/n-order with the fourth cumulant. This allows us to examine the theoretical effects of nonnormality, as measured by the skewness and kurtosis, on $\overline{X}$ chart. In addition, we investigate the effect of skewness and kurtosis on $\overline{X}$ chart in numerical studies. We use a skewed-normal distribution with a skew parameter to comprehensively investigate the effect of skewness.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.123-129
• /
• 2000

The Bootstrap method proposed by Efron is non-parametric method which doesn't depend on the estimation of prior distribution refer to population. A typical statistical process control chart which is generally used is developed under the assumption that observations follow mutually independent and identically distributed within a sample and between samples. However, autocorrelation greatly affect the developed control chart under the assumption that observations are mutually independent. Many researchers showed that the result which was analyzed by using a typical control chart for the observations which has the correlation violated to the independence assumption can not be true. Therefore, we compared the standard method with bootstrap method and then evaluated them for x control chart and EWMA control chart by using bootstrap method which was proposed by Efron in the AR(1) model when the observations have correlation.