• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.797-803
• /
• 2010

A method has been developed to tune the static stiffness at a rotation joint considering the whole machine tool system by interactive use of finite element method and experiment. This paper describes the procedure of this method and shows the results. The method uses the static experiment on measurement model which is set-up so that the effects of uncertain factors can be excluded. For FEM simulation, the rotation joint model is simplified using only spindle, bearing and spring. At the rotation joint, the damping coefficient is ignored, The spindle and bearing is connected by only spring. By static experiment, 500 N is forced to the front and behind portion of spindle and the deformation is measured by capacitive sensor. The deformation by FEM simulation is extracted with changing the static stiffness from the initial static stiffness considering only rotation joint. The tuning static stiffness is obtained by exploring the static stiffness directly trusting the deformation from the static experiment. Finally, the general tuning method of the static stiffness of machine tool joint is proposed using the force stream and the modal analysis of machine tool.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.14 no.1
• /
• pp.15-23
• /
• 2008

Purpose : To evaluate the effects of elastic resistance exercise of lumbo-pelvic region and upper limbs muscle on equilibrium ability and shoulder pain of the elderly. Methods : The subject consisted of sixteen healthy elderly people(14 females. 2 males). They were from 61 to 83 years old and the mean age was 68.06. All subjects were assigned only the elastic resistance exercise group. The subject group received elastic resistance exercise for about 60 minutes per day, two times per weeks, during 8 weeks period. A Stop watch was used to measure static equilibrium ability and dynamic equilibrium ability and then pressure algometer was used to measure shoulder press pain threshold. All measurements of each subjects were measured at pre-experiment and post-experiment stage. SPSS 12.0 program was used to compile results. A Paired samples t-test was conducted to examine changes of static equilibrium, dynamic equilibrium and shoulder press pain threshold between pre-experiment and post-experiment. Results : The static equilibrium ability, dynamic equilibrium ability and shoulder press pain threshold were significantly differences between pre-experiment and post-experiment(p<.05). Conclusion : This data suggests that an eight week elastic resistance exercise improved static equilibrium ability and dynamic equilibrium ability and then reduced shoulder pain.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1216-1221
• /
• 2003

The specimen materials used in this research is bimaterial. The static photoelastic experiment was applied to them. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic hybrid method was introduced and it's validity had been assured. The static photoelastic hybrid method was applied to the Minimum Strain Energy Density Criterion, the Maximum Tangential Stress Criterion and Mode Mixity. Crack propagation criterion by the static photoelastic hybrid method was introduced and it was applied to the above various failure theories. Comparing the experimental initial angle of crack propagation with the theoretical initial angle of crack propagation from the various failure criterions. And then the optimal crack propagation criterion was suggested and it's validity was assured.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.140-145
• /
• 1997

A stuey to investigate the perception characteristics of color and brightness was conducted in a combined PC and TV monitor, The objective of this study is to suggest user's favorite color temperature in PC mode and user's favorite contrast in TV mode. Investigated factors were monitor coating(coatiog vs. non-coation)and screen brightness (30fL vs. 35fL)in first experiment and monitor coating and pucture movement(static vs. dynamic) in second experiment. The first experiment was conducted in TV mode. Twenty-three subjects (male 12, female 11) perticipated in this experiment. In first experiment, average color temperatures were about 8000K in all experimental conditions. In addition, there was significant difference between coating and non-coating screen at 0.1 level. In second experiment, average contrasts were obtained in all esperimental conditions. There was significant difference between coating and ndn-coating screen at 0.05 level, In addition, there was significant difference between static picture and dynamic picture at 0.1 level

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.204-205
• /
• 2014

Among common test methods of assessing structure safety for existing lightweight walls, the criteria of the quality assessment of the horizontal static load resistance has been considered ambiguous. In the current study, therefore, an experiment was conducted to figure out the standardized assessment criteria of the lightweight wall's horizontal static load resistance. Based on the findings of the experiment with gypsum board and ALC block walls, an acceptable amount of each standard and the variables of the stud wall arising from the appropriate load (1000N) on the wall in a daily life were accounted for, arbitrarily setting the maximum deformation amount below 15mm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1229-1236
• /
• 2004

The specimen materials used in this research are isotropic epoxy resins. The static photoelastic experiment was applied to them. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic experimental hybrid method was introduced and its validity had been assured. Crack propagation criterion used the stress components, which are considered the higher order terms, obtained from the static photoelastic experimental hybrid method was introduced and it was applied to the minimum strain energy density criterion, the maximum tangential stress criterion and mode mixity. Comparing the actual initial angle of crack propagation with the theoretical initial angle of crack propagation obtained from the above failure criterions, the validities of the above two criterions are assured and the optimal distance (r) from the crack-tip is 0.01mm in order to get the initial angle of crack propagation of isotropic epoxy resin.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1799-1806
• /
• 2004

The static photoelastic experiment was applied to orthotropic materials. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic experimental hybrid method for orthotropic material was introduced and its validity had been assured. Crack propagation criterion used the stress components, which are considered the higher order terms, obtained from the static photoelastic experimental hybrid method was introduced and it was applied to the minimum strain energy density criterion, the maximum tangential stress criterion and mode mixity. Comparing the actual initial angle of crack propagation with the theoretical initial angle of crack propagation obtained from the above failure criterions, the validities of the above two criterions are assured and the optimal distance (${\gamma}$) from the crack-tip is 0.01mm in order to get the initial angle of crack propagation of orthotropic material(C.F.E.C.).

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.4
• /
• pp.1879-1888
• /
• 2019

Background: The treatment of pain in the iliotibial band friction syndrome has been difficult to determine, according to studies to date. However, recent studies have suggested that flexibility in the subacute stage of pain in the iliotibial band friction syndrome may help reduce pain. Objective: To investigate the immediate effect on pressure pain threshold and flexibility of the tensor fascia latae and iliotibial band by applying static and dynamic myofascial release foam rolling and self-stretching to adults with shortening iliotibial band. Design: Randomized controlled trial Methods: In this study, 50 subjects who were selected in advance as a randomized controlled trial were randomly allocated using a R Studio program. The included subjects were randomly allocated to three intervention groups. The static self-myofascial release 18 people, dynamic self-myofascial release group 16 people separated the self-stretching group 16 people and conducted a homogeneity check in advance. Before the start of the experiment, after of the experiment, 5 minutes after the end of the experiment, the pressure pain threshold and flexibility change for each part were measured. Results: The results of this study showed that the static self-myofascial release showed a significant difference in the pressure pain threshold in the tensor fascia latae and middle, lower part of the iliotibial band, compared with the other intervention groups (p<.05). In change of flexibility, the static self-myofascial release was significantly different than the other intervention groups (p<.05). Conclusion: The result of this study suggest that static self-myofascial release using foam roller may help to improve the pain and flexibility of the iliotibial band and to apply it as a more discerning intervention.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.851-858
• /
• 2023

Purpose: A study was conducted to ensure the structural safety of a raised girder bridge with improved cross-sectional efficiency compared to the conventional PSC girder. For this purpose, the cross-sectional specifications such as girder length, height, and width were determined, the arrangement of the tendons was designed, and the practical performance of the raised girder under static and dynamic loads was verified. Method: The static performance experiment examined the serviceability limit state by measuring behavioral responses such as deflection and cracking to primary and secondary static loads. In addition, the dynamic load loading experiment measured the acceleration and displacement behavior response over time to calculate the natural frequency and damping ratio to examine the usability limit state. Result: As a result of the static performance test, the deflection value based on the maximum applied load showed stable behavior, and the crack width measured at the maximum applied load level was very small, satisfying the serviceability limit state. In addition, a natural frequency exceeding the natural frequency calculated during the design of the dynamic loading experiment was found, and a damping ratio that satisfies the current regulations was found to be secured.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.2
• /
• pp.33-40
• /
• 2008

Background: The purpose of this study is to examine the effect of resistance exercise on static and dynamic proprioception by applying elastic bands to the knee flexor, which can be performed earlier than proprioception, a weight bearing pattern. Proprioceptive training may be applied to the early period of recuperation training along with resistance exercise to prevent damage to the knees and the joints in the lower body, as well as the reoccurrence of injury, which is expected to improve the effect of static and dynamic proprioceptive training. Methods: The subjects of this study were 32 men and women in their 20s who volunteered to participate in the experiment which was carried out over the course of 6 weeks from March 14 to April 24 at K Hospital located in Yongin City. They were tested in two groups: the elastic band resistance exercise group (RE: Resistance Excercise Group, n＝17) and the joint motion range exercise group(ROM: Range of Motion Group, n＝15). In this experiment, static and dynamic proprioceptive tests were given to both groups before and after the test. In this study, SPSS Win ver.12.0 was utilized to perform a T-test on the independent samples in order to validate the identical features of subjects in the RE and ROM Group and substantiate the significance as to the difference between both groups before and after the test. Also, a paired T-test was conducted to compare the static and dynamic proprioception of both groups before and after the test. The statistical significance levels were ${\alpha}$＝.05. Results: 1.The static proprioception in both groups, RE and ROM, increased in a statistically significant way after the test(p<.05). 2.The static propriocetion of the RE group increased in a statistically significant way after the test(p<.05). However, the increase of the static proprioception in the ROM group was not statistically significant. 3.Static and dynamic proprioception of the RE group increased significantly more than that of the ROM group after the test(p<.05). Conclusion: The resistance exercise using elastic bands improved the static and dynamic proprioception more than the joint motion range exercise did, reducing the risk of injury by enhancing the location sense of the joints and the sense of motion and shortening the period of recovery from injury. The outcome of the experiment may provide basic data for developing an effective way to reduce the risk of injury among ordinary people and athletes.