Browse > Article
http://dx.doi.org/10.3795/KSME-A.2004.28.8.1229

Application of the Static Photoelastic Experimental Hybrid Method to the Crack Propagation Criterion for Isotropic Materials  

Shin Dong-Chul (영남대학교 기계공학부)
Hawong Jai-Sug (영남대학교 기계공학부)
Nam Sung-Su (영남대학교 대학원 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.28, no.8, 2004 , pp. 1229-1236 More about this Journal
Abstract
The specimen materials used in this research are isotropic epoxy resins. The static photoelastic experiment was applied to them. And then the specimens used in photoelastic experiment were fractured under static load. The static photoelastic experimental hybrid method was introduced and its validity had been assured. Crack propagation criterion used the stress components, which are considered the higher order terms, obtained from the static photoelastic experimental hybrid method was introduced and it was applied to the minimum strain energy density criterion, the maximum tangential stress criterion and mode mixity. Comparing the actual initial angle of crack propagation with the theoretical initial angle of crack propagation obtained from the above failure criterions, the validities of the above two criterions are assured and the optimal distance (r) from the crack-tip is 0.01mm in order to get the initial angle of crack propagation of isotropic epoxy resin.
Keywords
Isotropic Material; Static Photoelastic Experimental Hybrid Method; Crack Propagation Criterion; Minimum Strain Energy Density Criterion; Maximum Tangential Stress Criterion; Mode Mixity;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kitagawa, H. and Yuuki, R., 1977, 'Analysis of Arbitrarily Shaped Crack in a Finite Plate Using Conformal Mapping, 1st Report-Construction of Analysis Procedure and its Applicability,' Trans. Japan Soc. Mech. Engrs., Vol. 43, No. 376, pp. 4354-4362   DOI
2 Williams, J. G. and Ewing, P. D., 1972, 'Fracture under Complex Stress the Angled Crack Problem,' Int. J. Frac. Mech., Vol. 8, No.4, pp. 441-445
3 Hussain, M. A., Pu, S. L. and Underwood, J., 1974, 'Strain Energy Release Rate for a Crack under Combined Mode I and Mode II,' Fract. Anai. ASTM STP, Vol. 560, pp. 2-28   DOI
4 Erdogan, F. and Sih, G. C., 1963, 'On the Crack Extension in Plates under Plane Loading and Transverse Shear,' Tran. ASME, pp. 519-528
5 Sih, G. C., 1972, 'Mechanics of Fracture,' Noordhoff, Leyden
6 Sih, G. C., 1974, 'Strain-Energy-Density Factor Applied to Mixed Crack Problems,' Int. J. Frac .. Vol. 10, No.3. pp. 305-321   DOI
7 Muskhelishvili, N. I., 1963, 'Some Basic Problems of the Mathematical Theory of Elasticity,' 4th Edition, P. Noordhoff Ltd., Groningen, Netherlands
8 Sih, G C., Liebowitz, H., 1968, 'Mathematical Theories of Brittle Fracture,' Fracture an Advanced Treatise, Academic Press, New York, Vol. II, pp. 67-190
9 Hawong, J. S., Lin, C. H., Lin, S. T., Rhee, J. and Rowlands, R. E., 1995, 'A Hybrid Method to Determine Individual Stresses in Orthotropic Composites Using Only Measured Isochromatic Data,' Journal of Composite Material, Vol. 29, No. 18, pp. 2366-2387   DOI
10 Shin, D. C., Hawong, J. S., Lee, H. J., Nam, J. H. and Kwon, O. S., 1998, 'Application of Transparant Photoelastic Experiment Hybrid Method to the Fracture Mechanics of Isotropic Material,' Tans. of KSME (A), Vol. 22, No.5, pp. 834-842
11 Shin, D. C., Hawong, J. S., Nam, J. H., Lee, H. J. and Kwon, O. S., 1998, 'Application of Transparant Photoelastic Experimental Hybrid Method for the Fracture Mechanics of Orthotropic Material,' Tans. of KSME (A), Vol. 22, No.6, pp. 1036-1044
12 Hawong, J. S., Shin, D. C. and Lee, H. J., 2001, 'Photoelastic Experimental Hybrid Method for Fracture Mechanics of Anisotropic Materials,' Experimental Mechanics, Vol. 41, No. 1, pp. 92-99   DOI   ScienceOn
13 Griffith, A. A., 1921, 'The Phenomena of Rupture and Flow in Solids,' Phi. Trans. Royal Soc. London A, Vol. 221, pp. 163-198   DOI