• Journal of The Korean Association For Science Education
• /
• v.17 no.2
• /
• pp.127-137
• /
• 1997

The purpose of this study was to assess elementary student's ability of measuring length, area, and volume and reading metric scales. The findings of this study were as follows. All students were successful in measuring without scale, regardless of grades. But they were less successful in measuring the task using standard and nonstandard scales. Especially, in measuring area, lower grade students were not able to perform the task using nonstandard instruments, but higher grade students were able to perform the task. Measuring area using grade paper was least successful for sixth graders. In measuring volume, students under fifth grade read the upper scale when using graduated cylinder. In measuring by direct comparison, students were more successful in measuring length than in measuring area and volume using given material. The use of given nonstandard material was successful for 4th, 5th, and 6th grade students. In measuring using metric scale, lower grade students did not pay attention to the zero of the scale, but just read the end point. Higher grade students considered both zero and end points.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.7
• /
• pp.44-51
• /
• 2010

This paper proposes the architecture of high-performance Viterbi decoder circuit. The proposed circuit does not require additional memory to calculate the branch metrics because it uses the characteristics of the branch data. The speed of the Viterbi decoder circuit is increased up to 75% by rearranging the path metric data in SRAM and registers properly for fast add-compare-select operations. We described the proposed Viterbi decoder circuit in Verilog HDL and synthesized the gate-level circuit using 130nm standard cell library. The synthesized circuit consists of 8,858 gates and its maximum operating frequency is 130MHz.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.937-946
• /
• 2005

In the current marketplace, there are maturity models, standards, methodologies and guidelines that can help an organization improve the way it does business. All SPI models including ISO/IEC I5504 and CMMI provide the capability level of software process. However, most available improvement models focus on a specific goals and Practices of the processes So my assessors need an objective process measure how to estimate achievement of goals and practices. We proposed quantitative process capability metric (PCM) which can determine the degree of capability And the effective measuring approach help SPI assessor as well as organization unit.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.45-51
• /
• 1989

Lens distortion would produce image displacement, therefore correction of lens distortion is required urgently to improve accuracy of results in photogrammetry. The objective of this study is to find out lens distortion coefficients versus focussing distance on non-metric and metric camera and to investigate propriety of application of lens distortion coefficients to three dimensional analysis. Analytical plumb line method which needs not perform control survey and space resection and requires only one photograph was used in order to get lens distortion coefficients. As the result of this study, the coefficients of radial and tangential distortion change as focussing distance changes, and consequently it is reasonable to apply the eigenvalues of lens distortion coefficients according to focussing distance. When these coefficients were applied to actual measurement, standard errors decreased about 30% or 76% remarkably.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.135-148
• /
• 2001

The measuring rule Is to extimate a size of a physical solid and its standard was each part of body since the beginning of the world. Korean traditional measuring rule was "Kyul Boo Sok Pa Bob". It bases on wreth of farm land and means a handful and a bundle. It was the real Korean traditional measuring rule though it was a influence on Chinese rule. And in Koguryo it had an effect on Japanese′s. In Chosun dynasty the King Sejong imprived the measuring rule and regylations in such a way to meet the realistic needs of civil lives. He put in good order by a proportions of the musical scale. It was one of fille correct ways to preserve the measuring rule and based on "Kyul Beo Sok Pa Bob"too. So ill that time the measuring rule for Korean traditional costume′s length was 46.703cm. In king Soonjo it′s length was 49.254cm and in 1926 it changed 50cm by the metric system. In 1990s the standard length has a difference in regions, 30cm, 45cm, 50cm, 54.5cm, 55cm and 60cm. As a result of the actual object investigation by regional measuring rule for Korean traditional costume it can reduce an accidental error when use the standard measuring rule, 50cm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.601-614
• /
• 2007

Lately, as importance of biometric is recognized, domestic and foreign biometric software market is soaring and the requests of high reliability and quality of biometric software are inclosed. Evaluation items and criteria must be established for the biometric software quality certification. In this paper, we development the evaluation module for biometric software test based on ISO/IEC 12119 that is the standard about package software quality requirement and test, and ISO/IEC 9126 that is the standard about evaluation of software product, and ISO/IEC 14598-6 that is the standard for construction of the evaluation module. We think that this study can be used in establishing the software quality evaluation method of bio information processing software and constructing the basis for quality improvement.

• The KIPS Transactions:PartD
• /
• v.10D no.4
• /
• pp.719-726
• /
• 2003

A SPICE (Software Process Improvement and Capability dEtermination) and CMM (Capability Maturity Model) assessment can be considered as representative software process assessment models since assessors assign ratings to indicators and metrics to measure the capability of software precesses. But ail of process assessment models don't provide a subjective measurement procedure and metrics. In this paper we define basic quality process metrics and propose standard metrics for each process based on SPICE and CMM. This study also proposed a guideline for a subjective measurement procedure and the metrics are effectively use to SPI.

• KIEAE Journal
• /
• v.9 no.6
• /
• pp.65-72
• /
• 2009

Lighting for outdoor advertising is very common feature of building facades as they provide the information and commercial identification. As the interest of improving street beautification more widely, application of various lighting technologies has been develop for advertisement such as electric sign board and signage. Furthermore, the installation of higher sign luminance than needed has many negative consequences, including higher energy consumption and light pollution. There are now no standard for outdoor advertisements in terms of luminance, and installation of indiscreet outdoor advertisement without luminance consideration is becoming more commonplace. This study was to evaluate the luminous characteristics of outdoor advertising as a function of sign and building facade luminance, luminance ratio. Data were collected on 8 electric sign boards, 20 internally illuminated, externally illuminated, neon, and channel letter signs and 4 commercial areas. Photometric measurements were taken by CS-100(Minolta) and ProMetric-1400(Radiant Imaging) for various sign modes and sign design. Also luminance of building facades were analyzed according with CIE standard of maximum obtrusive light permitted for exterior lighting installations. The findings are as follows; (1) There were excessive luminance of electric sign boards that could affect adjacent building facade and night sky luminance. (2) Sings that are externally illuminated providing an inappropriate amount of light on to the outer surface of the sign caused higher building facade luminance and potential of unnecessary glare.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3C
• /
• pp.215-223
• /
• 2003

Turbo codes are selected as FEC(Forward error correction) codes with convolution code in 3GFP(3rd generation partnership project) and 3GPP2 standard of IMT2000. Especially, l/3 turbo code with K=4 is employed for 3GPP standard. In this paper, we proposed a hardware structure of a turbo decoder and denveloped the decoder for 3GPP standard turbo code. For its efficient operation, we design a SOVA decoder by employing a register exchange decoding block and new path metric normalization block as a SISO constituent decoder. In addition, we estimate its performance under MATLAB 6.0 and designed the turbo decoder including control block, input control buffer, SOVA constituent decoder with VHDL. Finally, we synthesized the developed turbo decoder under Synopsys FPGA Express and verified it with ALTERA EPF200SRC240-3 FPGA device.

• The KIPS Transactions:PartD
• /
• v.13D no.5 s.108
• /
• pp.699-708
• /
• 2006

The latest biometric field have marched fast with security technology of IT. As importance of present biometrics is realized, internal and external biometrics software market is trend that is soaring. Accordingly, high reliability of biometric software and request of high quality software are enlarged. Evaluation items and criteria must be established for biometric software quality assurance. In this paper, we development the evaluation module for biometric software test based on ISO/IEC 12119 that is the standard about software quality requirement and test, and ISO/IEC 9126 that is standard about evaluation of software product, and ISO/IEC 14598-6 that is the standard about construction of the evaluation module. Constituents of biometric software products(product descriptor, user document program and data) is subject to the quality evaluation module that we developed in this paper, we can expect improvement in the quality of software by using with a standard such as ISO/IEC 9126-3 that can be used in software development process.