• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.304-305
• /
• 2018

Development of waterproof methods and materials resulted in the huge changes in waterproof construction materials. In consequence, the construction-standard-production-rate underwent overall revision in 2018. Especially, from the development of the specification standard and construction methods, the waterproof construction which had lower applicability in the existing construction production rate was revised. The construction methods which did not have applicability were removed. In addition, as there was a material difference based on parts, the constructionstandard-production-rate was revised by distinguishing vertical part and floor. Furthermore, by suggesting more clear work extent, the practicability in creating the standard for calculation of the estimated price in the construction field will increase.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.708-717
• /
• 2009

Recently, Korea government decided to introduce RPS (Renewable Portfolio Standard) mechanism which requires electricity providers to gradually increase the amount of renewable energy sources such as wind, solar, bioenergy, and geothermal. As a consequence, it is expected that the long-term fuel mix would be changed to result in more expensive production and the increased production costs would be distributed to the rate payers via electricity tariffs. This paper presents the change in long-term fuel mix in year 2020 with the four RPS scenarios of 3%, 5%, 10% and 20%, and the methodologies for collecting the increased production costs through new tariff schedule. The studies on long-term fuel mix have been carried out with the GATE-PRO (Generation And Transmission Expansion Program) optimization package, a mixed-integer program developed by the Korea Energy Economics Institute and Hongik university. Three methodologies for distributing the production costs to the rate payers have also been demonstrated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.69-70
• /
• 2022

The domestic process planning generally relies on calculations based on the construction-standard-production-rate. This method requires trial and error practice during the construction phase to deduce the optimized equipment combination for time and cost. Trial and error during construction can lead to cost overruns and schedule delays. Accordingly, this paper suggests an advanced method for establishing a productivity database based on combinations of equipment and also considering site conditions in order to reduce the timely effort for deducing the optimized equipment combination. For this purpose DES (Discrete Event Simulation) model was developed based on the information provided in the construction-standard-production-rate.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.21-29
• /
• 2022

Productivity estimation of construction operations is crucial to successful project delivery. Especially in the preconstruction phase, the adequacy and effectiveness of plans directly affect the actual performance of operations. Currently, productivity estimation is conducted by referring to existing references such as the Construction Standard Production Rate. However, it is difficult to promptly apply changing conditions of operations when using such references. Moreover, it is difficult to deduce the optimal combination of construction machinery for the given condition. This paper presents a simple simulation model that can be used to generate productivity data that considers site conditions and construction equipment combination. The suggested method is expected to be used as a decision making assisting tool for practitioners who rely on estimations using the Construction Standard Production Rate when establishing construction plans using heavy machinery such as backhoes, loaders and dumptrucks.

• Weed & Turfgrass Science
• /
• v.5 no.2
• /
• pp.82-87
• /
• 2016

Herbicide options for weed control in sorghum is very limited, hence there is a need for exploring potential herbicides. Sorghum herbicide tolerance field trails were conducted at two locations, Yaechoun, Gyeongsangbuk-do, and Miryang, Gyeongsangnam-do, in 2013. Tolerance of sorghum was evaluated following the pre-emergence application of methabenzthiazuron 70% (WP), simazine 50% (WP), oxadiargyl 1.7% (EC), and dimethenamid-P 5% + pendimethalin 20% (EC) at the standard rate 157.5 g, 75 g, 5.1 g, and 75 g a.i. $10a^{-1}$, respectively. As well as double the standard rate. On a phytotoxicity scale of 0 to 9, methabenzthiazuron (WP) induced injury to sorghum up to level 1 at the standard rate and to 3 at double the rate, but did not significantly affect the yield any statistical difference from the untreated. Simazine (WP) induced phytotoxicity up to levels 2 and 4 at single and double rates, respectively. Simazine (WP) did not significantly affect yield: however, the values were numerically lower than those in the methabenzthiazuron (WP) treatment. Oxidiargyl (EC) and dimethenamid + pendimethalin (EC) induced no or slight phytotoxicity; however they failed to provide effective weed control at the standard rate (32 and 68% control, respectively). Out of the tested, methabenzthiazuron (WP) was found to have potential for use in sorghum whereas the other herbicides caused unacceptable levels of injury.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.181-184
• /
• 2003

We manufactured standard motor to measure burning rate of propellant, used to estimate burning rate of main motor by static fired testing. We installed static fired testing facility and developed standard motor more lightly to accomplish the test. As a result of the tests, we could get the burning rate closer than acquired by existing method to the main motor's on. And we confirmed repeatability by many times of tests. We will use this method positively for R&D and quality assurance activity of mass production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.864-873
• /
• 2013

In developing countries, biogas energy production is seen as a technology that can provide clean energy in poor regions and reduce pollution caused by animal manure. Laboratories in these countries have little access to advanced gas measuring equipment, which may limit research aimed at improving local adapted biogas production. They may also be unable to produce valid estimates of an international standard that can be used for articles published in international peer-reviewed science journals. This study tested and validated methods for measuring total biogas and methane ($CH_4$) production using batch fermentation and for characterizing the biomass. The biochemical methane potential (BMP) ($CH_4$ NL $kg^{-1}$ VS) of pig manure, cow manure and cellulose determined with the Moller and VDI methods was not significantly different in this test (p>0.05). The biodegradability using a ratio of BMP and theoretical BMP (TBMP) was slightly higher using the Hansen method, but differences were not significant. Degradation rate assessed by methane formation rate showed wide variation within the batch method tested. The first-order kinetics constant k for the cumulative methane production curve was highest when two animal manures were fermented using the VDI 4630 method, indicating that this method was able to reach steady conditions in a shorter time, reducing fermentation duration. In precision tests, the repeatability of the relative standard deviation (RSDr) for all batch methods was very low (4.8 to 8.1%), while the reproducibility of the relative standard deviation (RSDR) varied widely, from 7.3 to 19.8%. In determination of biomethane concentration, the values obtained using the liquid replacement method (LRM) were comparable to those obtained using gas chromatography (GC). This indicates that the LRM method could be used to determine biomethane concentration in biogas in laboratories with limited access to GC.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1207-1219
• /
• 2022

「Act On Contracts To Which The State Is A Party」 stipulates that the "Construction Standard Production Rate" and "Construction Standard Unit Price" be used as the criteria for determining the estimated price of construction works performed by public institutions. In this regard, issues such as the application scope of the Construction Standard Unit Price, and the effect of budget reduction continue. However, due to the lack of quantitative data on the actual application of Construction Standard Unit Price, it is difficult to objectively evaluate various issues. In order to prepare data for objective evaluation of the Construction Standard Unit Price, this study analyzed the ripple effect of applying the Construction Standard Unit Price based on the bill of quantity. As a result of the analysis, the Construction Standard Unit Price ripple effect in the civil engineering part was 9.2%, and it was analyzed that there was a ripple effect of about 1.9% based on the civil engineering direct cost. In the construction part, the ripple effect was analyzed to be relatively high at 17%, but it was found to have a ripple effect of about 3% in the construction direct cost. Based on the total direct cost, the ripple effect was calculated as 2.2%. Based on the analysis results, it is possible to evaluate the effect of applying the Standard Market Unit Price, and it is expected to be used as basic data to solve issues. As a future study, it is necessary to additionally analyze the ripple effect by Standard Market Unit Price application range (over 10 billion, over 20 billion won, etc.) and delivery system type (comprehensive evaluation, qualification examination, technical bidding, etc.). In addition, it is necessary to study the appropriate ripple effect of the Standard Market Unit Price.

• Journal of the Korean Society of Industry Convergence
• /
• v.12 no.2
• /
• pp.69-78
• /
• 2009

Dust in the fabric production sites is increased by the static electricity in air which is generated in the manufacturing process. The static electricity is shown in inverse proportion to humidity of the production sites. The optimum humidity rate for the filament in the production process has been established as 65~75%. Where as, average humidity rate of production site is estimated as 40%. Therefore, it is necessary to raise the humidity rate by 30% to maintain appropriate humidity to control generation of static electricity and dust in the production sites. In this study, a new air-jet water sprayer was developed and it can produce $10{\mu}m$ sprayed particles. When the air-jet water sprayer was operated on the production site dust generation rate was shown far below the environmental standard. It is assumed that when the air jet sprayers was applied to 1,000 fabric machines of 5 gloves making plants, its productivity and rates of operation will be improved by value of about 2.5 billion Won a year.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.12
• /
• pp.1693-1702
• /
• 2009

Economic values of 14 production and functional traits for two Slovak dairy sheep breeds (Improved Valachian and Tsigai) were calculated. Semi-extensive production systems with one lambing per year were simulated using a bio-economic deterministic computer model. The marginal economic value of a trait was defined as the partial derivative of the profit function with respect to that trait. The relative economic value expressed the percentage proportion of standardized economic value (marginal economic value${\times}$genetic standard deviation) of a trait in the sum of the absolute values of the standardized economic values over all traits. Milk yield was of highest relative importance (26% and 32% in Improved Valachian and Tsigai) followed by productive lifetime and conception rate of ewes (16% and 15% in Improved Valachian and Tsigai, in both traits). Conception rate of female lambs and litter size had nearly the same relative economic importance in both breeds (9% to 11%). Survival rate of lambs at lambing and till weaning reached slightly lower economic values (4% to 7%). The economic importance of all remaining traits was less than 4%.