• 한국대기환경학회지
• /
• 제13권2호
• /
• pp.103-113
• /
• 1997

The research described in this paper was conducted to estimate the stability and heat budget in planetary boundary layer (PBL) at Kimhae. The upper air observation was carried out during period from 3 Februsry 1993 to 5 February 1993 at Kimhae. The surface observation data used the one during period from 1 April 1994 to 31 March 1995. The maximum height of inversion layer observed at Kimhae was 310 m. Destruction of the inversion was simultaneously occurred at the surface and the mid-layer (200 $\sim$ 300 m), however the origin of destruction is different each other. The surface inversion is destructed by surface heating owing to growing radiation in surface but disappearance of the mid-layer inversion is related to the upper cold air movement.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.904-910
• /
• 2001

Static and oscillatory loss of stability of composite pipes conveying fluid is investigated. The theory of thin walled beams is applied and transverse shear, rotary inertia, primary and secondary warping effects are incorporated. The governing equations and the associated boundary conditions are derived through Hamilton's variational principle. The governing equations and the associated boundary conditions are transferred to eigenvalues problem which provides the information about the dynamic characteristics of the system. Numerical analysis is performed by using extended Gelerkin method. Critical velocity of fluid is investigated by increasing fiber angle and mass ratio of fluid to pipe including fluid.

• 태양에너지
• /
• 제8권1호
• /
• pp.82-94
• /
• 1988

The hydrodynamic stability equations for natural convection flows adjacent to a vertical isothermal surface in cold or warm water (Boussinesq or non-Boussinesq situation for density relation), constitute a two-point-boundary-value (eigenvalue) problem, which was solved numerically using the simple shooting and the orthogonal collocation method. This is the first instance in which these stability equations have been solved using a computer code COLSYS, that is based on the orthogonal collocation method, designed to solve accurately two-point-boundary-value problem. Use of the orthogonal collocation method significantly reduces the error propagation which occurs in solving the initial value problem and avoids the inaccuracy of superposition of asymptotic solutions using the conventional technique of simple shooting.

• 대한수학회지
• /
• 제58권5호
• /
• pp.1109-1129
• /
• 2021

This paper considers an anisotropic polytropic infiltration equation with a source term $$u_t={\sum\limits_{i=1}^{N}}{\frac{{\partial}}{{\partial}x_i}}\(a_1(x){\mid}u{\mid}^{{\alpha}_i}{\mid}u_{x_i}{\mid}^{p_i-2}u_{x_i}\)+f(x,t,u)$$, where p_i > 1, α_i > 0, a_i(x) ≥ 0. The existence of weak solution is proved by parabolically regularized method. Based on local integrability $u_{x_i}{\in}W_{loc}^{1,p_i}(\Omega)$, the stability of weak solutions is proved without boundary value condition by the weak characteristic function method. One of the essential characteristics of an anisotropic equation different from an isotropic equation is found originally.

• 한국측량학회지
• /
• 제24권3호
• /
• pp.251-259
• /
• 2006

기존 철도의 전철화 사업 수행을 위해서는 노후 터널의 역학적 안정성 조사와 함께 건축한계의 확보가 필수적으로 이루어져야 한다. 건축한계가 확보되지 않으면 터널의 선형 개선을 토대로 한 재시공이 발생하므로 측량 자료가 요구된다. 본 연구에서는 영동선 구간의 3개 터널에 대하여 동일좌표체계의 정밀 측량을 실시하고 종횡단면도, 종단레일고, 레일경사, 횡단터널높이, 건축한계높이 등의 자료를 취득하여 직선 및 곡선 터널구간의 건축한계를 효율적으로 분석하였다. 종횡단 측량성과를 이용한 도면과 기존 설계값과 비교하여 건축한계를 분석하고 시공성을 파악할 수 있도록 전철화 설계의 안정성에 대한 평가자료로 제시할 수 있었으며, 향후에는 터널구조물의 실시간 모니터링 시스템 개발에 이의 운용성을 증대시키고자 한다.

• 터널과지하공간
• /
• 제5권1호
• /
• pp.1-10
• /
• 1995

The behavior of a jointed rock mass depends mainly on the geometrical and mechanical properties of joints. The failure mode of a rock mass and kinematics of rock blocks are governed by the orientation, spacing, and persistence of joints. The mechanical properties such as dilation angle, shear strength, maximum closure, strength of asperities and friction coeffiient play important roles on the stability and deformation of the rock mass. The normal and shear behaviour of a joint are coupled due to dilation, and the joint deformation depends also on the boundary conditions such as stiffness conditons. In this paper, the joint constitutive law including the dilatant behaviour of a joint is numerically modelled using the edge-to-edge contact logic in distinct element method. Also, presented is the method to quantify the input parameters used in the joint law. The results from uniaxial compression and direct shear tests using the numeical model of the single joint were compared to the analytic results from them. The boundary effect on the behaviour of a joint is verified by comparing the results of direct shear test under constant stress boundary condition with those under constant stiffness boundary condition. The numerical model developed is applied to a complex jointed rock mass to examine its performance and to evaluate the effect of joint dilation on tunnel stability.

• 대한수학회지
• /
• 제42권6호
• /
• pp.1137-1152
• /
• 2005

In this article we prove the existence of the solution to the mixed problem for Euler-Bernoulli beam equation with memory condition at the boundary and we study the asymptotic behavior of the corresponding solutions. We proved that the energy decay with the same rate of decay of the relaxation function, that is, the energy decays exponentially when the relaxation function decay exponentially and polynomially when the relaxation function decay polynomially.

• 대한수학회지
• /
• 제49권5호
• /
• pp.947-964
• /
• 2012

In this paper, the memory type boundary stabilization for an Euler-Bernoulli beam with one end fixed and control at the other end is considered. We prove the existence of solutions using the Galerkin method and then investigate the exponential stability of solutions by using multiplier technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.38.1-38
• /
• 2001

In this paper, the vibration suppression problem of an axially moving power transmission belt is investigated. The equations of motion of the moving belt is first derived by using Hamilton´s principle for systems with changing mass. The total mechanical energy of the belt system is considered as a Lyapunov function candidate. Using the Lyapunov second method, a nonlinear boundary control law that guarantees the uniform asymptotic stability is derived. The control performance with the proposed control law is simulated. It is shown that a boundary control can still achieve the uniform stabilization for belt systems.

• East Asian mathematical journal
• /
• 제32권3호
• /
• pp.355-364
• /
• 2016

In this paper, we study exponential stabilization of the vibrations of the Kelvin-Voigt type wave equation with Balakrishnan-Taylor damping and acoustic boundary in a bounded domain in $R^n$. To stabilize the systems, we incorporate separately, the internal material damping in the model as like Kang [3]. Energy decay rate are obtained by the exponential stability of solutions by using multiplier technique.