• 기술사
• /
• 제33권5호
• /
• pp.38-44
• /
• 2000

High Quality is requested by Consumers more and more, Accordingly, the Quality of Yarns should be followed to satisfy the Desire of Consumers. Therefore, Yarn Hairiness, which has effects on Touch, Handle, iud Dyeing, is one of important factor. In order to reduce Yarn Hairiness, various tests were made in Spinning process and the following Spinning conditions can be suggested. -. The Speed should be as lower as possible. -. Using proper Tension Disc on Winding process. -. Using Colletor on Ring Spinning process. -. Using proper Ring and Traveller :n Ring Spinning process To get the best results, continuous Trial tests should be carried-on.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.620-623
• /
• 2002

Spinning has been used widely for the manufacture of hollow parts with rotational symmetry. With developing CNC machine, CNC machine center can be applied to the spinning processes. In this paper, a study on the development of CNC spinning technology without mandrel is carried out. The deforming process of the spinning process was simulated by DEFORM 3D to give basic design data.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.111-115
• /
• 1998

Fiber spinning is a continuous deformation process by which material is converted into a fiber. The melt spinning process was analyzed mainly by employing an asymptotic method of the so-called thin filament equations which formulates dynamics of spinning process by averaging over the cross-section of filament the set of fundamental equations. The method gives the approximate results for commonly used circular fiber spinning.(omitted)

• 소성∙가공
• /
• 제21권6호
• /
• pp.360-365
• /
• 2012

The aim of this study was to investigate the effects of forming depth on the deformation behavior of cup-like tubes made of AISI1020 steel in tube spinning process. Spinning process was performed on cup-like tubes, which had an inner diameter of 34mm and thicknesses of 7, 8.5 or 11.5mm. The forming depths achieved were 3, 4, and 5.5mm. The complex deformation behaviors occurring during the tube spinning process was explained using the experimental results. Also analyzed were the causes of the material buildup and the bulge defect of inner surface, observed on cross section of tubes. The relationship between tube spinning conditions and the height of bulge defect was examined. The results indicate that bulge defect is increased with a decrease of the forming depth. Moreover, a critical forming depth exists for preventing the generation of the bulge defect in the tube spinning process. The present results will be useful for future decisions of forming depths for successful tube spinning of cup-like tubes.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.27-37
• /
• 2022

In this study, a study and interpretation of the spinning process in copolymerized aramid spinning was conducted. In order to proceed with the spinning process modeling and analysis, the spinning process was modeled through the physical property modeling of the spinning solution and the structural modeling of the spinneret, and structural stability and flow of the spinneret for this spinning were analyzed. After modeling the spinning solution and the spinneret in a virtual space, the pack pressure and flow rate when the spinning solution was discharged were simulated. Macroscopically, the structural stability of the spinneret was confirmed at the standard pack pressure (100 kg·f/cm²), and microscopically, the flow rate and pressure drop data of the spinning solution according to the L/D(Length (L)/Diameter (D)) value were analyzed. Based on the research and development of virtual engineering modeling and analysis, we present the possibility of changing the shape and mechanical properties of copolymer aramid fibers according to the spinning process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.115.4-115
• /
• 2002

The disc spinning machine is a specific production machine for discs of automobile. Using this machine, we could product superior wheels in hardness and strength to the press method and the machine made process time shorten by one-pass spinning. But, the spinning machine became huge because it needed maximum pressure during the process and this can badly affect the lifetime of components. In this paper, hydraulic control system was designed to make up for defects of spinning machine and to shorten overusing power. Experimental hydraulic control system was used to simulate the wheel disc spinning process and the control performance was evaluated for the required forces and positions.

• 한국추진공학회지
• /
• 제19권6호
• /
• pp.64-71
• /
• 2015

스피닝 공정은 축대칭의 얇은 두께를 가지고 있는 속이 빈 실린더형 단면을 가지고 있는 부품에 일반적으로 사용된다. 전통적인 스피닝 제작 기술은 컨벤셔널 스피닝과 파워 스피닝(전단 스피닝과 유동성형)으로 구분된다. 액체추진로켓의 연소기의 재생냉각 챔버와 확대노즐부에서 적용된 스피닝에 대한 문헌조사를 수행하였다. 연소실과 노즐의 제작에 사용되는 스피닝은 대부분 맨드럴을 사용하였다. 최근에는 전통적인 냉간 스피닝에 비해 열간 스피닝도 많이 사용되고 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.81-84
• /
• 2001

Some trials to simulate the spinning process by which V-belt pulley is usually being manufactured are done in this study. 2D finite element analysis (FEA) for the whole process to produce a mono-typed pulley including preforming, 1st spinning, axial compression and 2nd spinning processes is carried out using the commercial code $DEFORM2D^{TM}$. The sectional shape after each process is compared with that of real product. The deformed shape obtained from the FEA, on the whole, coincides with the experimental result well, but the thickness around the bottom of the V-groove is somewhat different each other.

• Korea-Australia Rheology Journal
• /
• 제15권1호
• /
• pp.1-7
• /
• 2003

A new method is introduced to build up organic/organic multilayer films composed of cationic poly(allylamine hydrochloride) (PAH) and negatively charged poly (sodium 4-styrenesulfonate) (PSS) using the spinning process. The adsorption process is governed by both the viscous force induced by fast solvent elimination and the electrostatic interaction between oppositely charged species. On the other hand, the centrifugal and air shear forces applied by the spinning process significantly enhances desorption of weakly bound polyelectrolyte chains and also induce the planarization of the adsorbed polyelectrolyte layer. The film thickness per bilayer adsorbed by the conventional dipping process and the spinning process was found to be about 4 ${\AA}$ and 24 ${\AA}$, respectively. The surface of the multilayer films prepared with the spinning process is quite homogeneous and smooth. Also, a new approach to create multilayer ultrathin films with well-defined micropatterns in a short process time is Introduced. To achieve such micropatterns with high line resolution in organic multilayer films, microfluidic channels were combined with the convective self-assembly process employing both hydrogen bonding and electrostatic intermolecular interactions. The channels were initially filled with polymer solution by capillary pressure and the residual solution was then removed by the .spinning process.

• 품질경영학회지
• /
• 제20권1호
• /
• pp.147-157
• /
• 1992

This article describes a prototype expert system for yarn spinning process planning in textile industry. This expert system is intended as a consultant to give the technicians interactive assistance for the appropriate process planning in accordance with used materials, required count, and other factors affected yarn spinning by means of many types of machine. Also, this system has the other function that can be compared the standard values with the measured ones for quality characteristics control. VP-EXPERT-a rule-based microcomputer expert system development tool-provides the expert system components for this development. The details of knowledge organization, rule representation, inference reasoning process, and performance of this expert system are demonstrated with the practical yarn spinning operations.