A Finite Element Simulation of the V-Belt Pulley Spinning Process

V-벨트 풀리 스피닝 성형공정의 유한요소 시뮬레이션

  • 김성종 (강원대학교 기계 메카트로닉스 공학부) ;
  • 김홍래 (강원대학교 기계 메카트로닉스 공학부) ;
  • 이태경 (한국파워트레인(주)) ;
  • 김용성 (ATES(주)) ;
  • 김형종 (강원대학교 기계 메카트로닉스 공학부)
  • Published : 2001.05.01

Abstract

Some trials to simulate the spinning process by which V-belt pulley is usually being manufactured are done in this study. 2D finite element analysis (FEA) for the whole process to produce a mono-typed pulley including preforming, 1st spinning, axial compression and 2nd spinning processes is carried out using the commercial code $DEFORM2D^{TM}$. The sectional shape after each process is compared with that of real product. The deformed shape obtained from the FEA, on the whole, coincides with the experimental result well, but the thickness around the bottom of the V-groove is somewhat different each other.

Keywords