• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2021

The inverted Y-shaped strip detection method based on acetylcholinesterase (AChE) was developed for the rapid detection of organophosphorus and carbamate pesticides. The inactivation of AChE by organophosphorus and carbamate pesticides has been well known. The AChE catalyzes acetylthiocholine into thiocholine having (-) and (+) charges, and the (+) charge results in aggregation of gold nanoparticle (GNP). Malaoxon and carbofuran were used as standard organophosphorus and carbamate for the development of the inverted Y-shaped strip, respectively. In order to optimize the method, various angles of the Y-shaped strip, different types of nitrocellulose membrane, and concentration of AChE were tested as key parameters. The detection limit of the method was 10 ng/mL for both malaoxon and carbofuran pesticides. No cross-reaction was observed to other pesticides such as atrazine, cyanazine, simazine, bifenthrin, boscalid, metalaxyl, and chlorobenzilate. Recoveries from lettuce spiked when known concentrations of malaoxon and carbofuran were found ranging from 96.4 to 100.7% and 81 to 112.7%, respectively. This study suggests that the inverted Y-shaped strip method based on AChE may be a useful tool for the sensitive, specific, rapid detection of organophosphorus and carbamate pesticides in agricultural products.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.2
• /
• pp.64-68
• /
• 2012

We have successfully demonstrated a bandgap alteration of transparent zinc oxide (ZnO) thin film with Mg dopant by using sol-gel spin coating technique. By increasing the dopant from 0 to 30 atomic percent (at.%), a decrement value in the cutoff is observed, where the absorption edge shifts continuously to the shorter wavelength side, towards 300 nm. This resulted in a significant bandgap increment from 3.28 to 3.57 eV. However, the transmittance of the thin film at 350-800 nm gradually downgraded, from 93 to 80 % which is most probably due to the grain size that becomes bigger, and it also affected the electrical properties. The decrement from 45 to 0.05 mA at +10 V was observed in the I-V characteristics, concluding the significant relationship; where higher optical bandgap materials will exhibit lower conductivity. These findings may be useful in optoelectronics devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.245-245
• /
• 2009

l-D nanostructured materials have much more attention because of their outstanding properties and wide applicability in device fabrication. Copper oxide(CuO) has been realized as a p-type metal oxide semiconductor with narrow band gap of 1.2 -1.5eV. Copper oxide nanostructures can be synthesized by various growth method such as oxidation reaction, thermal evaporation thermal decomposition, sol-gel. and Mostly CuO nanowire prepared on the Cu substrate such as Copper foil, grid, plate. In this study, CuO NWs were grown by thermal oxidation (at various temperatures in air (1 atm)) of Cu metal deposited on CuO (20nm)/$SiO_2$(250nm)/Si. A 20nm-thick CuO layer was used as an adhesion layer between Cu metal and $SiO_2$

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.359-359
• /
• 2012

Trivalent rare-earth ($RE^{3+}=Eu^{3+}\;and\;Tb^{3+}$) ions activated $CaGd_4O_7$ phosphors were synthesized by a sol-gel process. After annealing at $1,500^{\circ}C$, the XRD patterns of the phosphor confirmed their monoclinic structure. The photoluminescence excitation spectra of $Eu^{3+}$ and $Tb^{3+}$ doped $CaGd_4O_7$ phosphor shows the broad-band excitations in the shorter wavelength region due to charge transfer band of completely filled $O^{2-}$ to the partially filled $Eu^{3+}$ ions and f-d transitions of $Tb^{3+}$ ions, respectively. The photoluminescence spectra show that the reddish-orange ions and green emission for $Eu^{3+}$ and $Tb^{3+}$ ions, respectively. Owing to the importance of thermal quenching property in the technological parameters, the temperature-dependent luminescence properties of these phosphors were measured for examing the suitability of their applications in the development of light emitting diodes (LEDs). In addition to those measurements, the cathodoluminescence properties were examined by changing the acceleration voltage and filament current. The calculated chromaticity coordinates of these phosphors were close proximity to those of commercially available phosphors for LED and field emission display devices.

• Advances in nano research
• /
• v.6 no.1
• /
• pp.1-19
• /
• 2018

Iron oxide nanoparticles excite researcher interest in biomedical applications due to their low cost, biocompatibility and superparamagnetism properties. Magnetic iron oxide especially magnetite ($Fe_3O_4$) possessed a superparamagnetic behaviour at certain nanosize which beneficial for drug and gene delivery, diagnosis and imaging. The properties of nanoparticles mainly depend on their synthesis procedure. There has been a massive effort in developing the best synthetic strategies to yield appropriate physico-chemical properties namely co-precipitation, thermal decomposition, microemulsions, hydrothermal and sol-gel. In this review, it is discovered that magnetite nanoparticles are best yielded by co-precipitation method owing to their simplicity and large production. However, its magnetic saturation is within range of 70-80 emu/g which is lower than thermal decomposition and hydrothermal methods (80-90 emu/g) at 100 nm. Dimension wise, less than 100 nm is produced by co-precipitation method at $70^{\circ}C-80^{\circ}C$ while thermal decomposition and hydrothermal methods could produce less than 50 nm but at very high temperature ranging between $200^{\circ}C$ and $300^{\circ}C$. Thus, co-precipitation is the optimum method for pre-compliance magnetite nanoparticles preparation (e.g., 100 nm is fit enough for biomedical applications) since thermal decomposition and hydrothermal required more sophisticated facilities.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.152-157
• /
• 2001

This paper is to model a 3D-shape product applying mathematically the data acquired from a 30 scanner and using an Automatic Design Program. The research studied in th reverse engineering up to now has been developed continuously and surprisingly. However, forming 3D-shape sol id models in CAE and CAM. based on the research, the study leaves much to be desired. Especially, analyses and studies reverse-designing automatically using measured data after manufacturing. Consequently, we are going to acquire geometric data using an 30 scanner in this study with which we will open a new field of reverse engineering by a program which can design a 3D-shape solid model in a CDA-based program automatically. Utilization of this program make it possible to minimize time in designing a product and establish a ADS(Automatic design system) program library to using all of the data from reverse engineering.

• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.224-228
• /
• 2014

The electrocaloric effect of 9/65/35 PLZT thin film fabricated by the sol-gel method, which has not been studied yet, was investigated for its structural, electrical properties as well as temperature change property. The relaxor ferroelectric property of 9/65/35 PLZT thin film was confirmed by examining its dielectric and electrical properties. The relaxor property can cause a more pronounced electrocaloric effect (ECE) in a wider temperature range than normal ferroelectric film. To avoid errors caused by using an indirect measurement method, the leakage current generated by increasing temperatures was minimized by using the optimal maximum electric field ($350kVcm^{-1}$) in the thin film. The largest temperature change ${\delta}T$ (0.23 K) and the electrocaloric strength ${\xi}$ (0.68 mkcm/kV), calculated by equations were obtained. The maximum field change ${\delta}E$ ($191kVcm^{-1}$) was in the vicinity of the curie temperature ($200^{\circ}C$).

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.96-99
• /
• 2014

We fabricated $(Li_{0.5-x}Na_xLa_{0.5})Ti_{0.8}Zr_{0.2}O_3$(LNTLZ)ceramics ($0{\leq}x{\leq}0.4$) with a perovskite structure via standard solid state synthesis. The influence of Na content on the structural and electrical properties of LNTLZ ceramics was also investigated. During XRD patterns analysis, all of the samples showed orthorhombic structure. The resistance of LNTLZ ceramics decreased as Na content increased, and the maximum activation energy shows 0.56 eV at x=0.4 at room temperature. These results indicated that LNTLZ ceramics are a candidate for use Lithium ion batteries as electrolytes.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.8
• /
• pp.1229-1235
• /
• 2006

A lab-on-a-chip (LoC) was designed for simultaneous monitoring of microorganisms, antibiotic residues, somatic cells, and pH in raw milk. The LoC was fabricated from polydimethylsiloxane (PDMS) using microelectromechanical system (MEMS) technology, which consisted of two parts; a protein array and microchannel. The protein array was fabricated by immobilizing five types of antibodies corresponding to two microorganisms, two antibiotic residues, and somatic cells. A sol-gel film was deposited on a glass substrate to immobilize the antibodies. The target analytes in raw milk could be bound with the corresponding antibody by an immunoreaction, and the antigen-antibody complex was detected using fluorescence microscopy. SNARF-dextran was used as a pH indicator, and the SNARF-entrapped hydrogel was attached to the microchannel in the chip. After injecting the milk sample into the channel, the pH was measured by monitoring the change in fluorescence intensity by fluorescence microscopy. The on-chip simultaneous assay of two microorganisms (E. coli O157:H7 and Streptococcus agalactiae), two antibiotic residues (penicillin G and dihydrostreptomycin), and neutrophils was successfully accomplished using the proposed LoC system.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.22-31
• /
• 1997

We have measured the optical properties, thickness, and energy band gap of the P $b_{1-x}$/100/L $a_{x}$100/ $Ti_{1-}$0.25x/100/ $O_{3}$ (PLT(x)) thin film prepared by the sol-gel method with varying the La concentration, x, fyom 15 nto 33 mol%. We have obtained the values from the tranmission spectrum and employed the envelope method in anayzing the spectrum. We have also performed the simulation of the transmission spectrum on the PC (personal computer) to verify the accuracy of the values 15 to 33mol%, the refractive index (at .lambda.=632.8nm) increases from 2.39 to 2.44. The extinction coefficient does not depend on the la concentration but mainly on te wavelength, and has the values between 0.2 and 0.5 at the wavelength shorter than 330nm and between 0.001 and 0.008 at the wavelength longer than 700nm. The energy band gap of the PLT (x) thin film has been obtained on the assumption of the direct band-to-band transition. It decreases from 3.28 to 3.17eV as the La concentration increases from 15 to 33 mol%. The thickness of the PLT(x) thin film has been also obtained in high accuracy by the envelope method..