• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.543-546
• /
• 2000

Ferroeleclric 0.05PZN-xPZT(90/10)-(0.95-x)PZT(10/90) (x=0.65, 0.85) specimens were fabricated by the mixed-oxide method and cold-pressing method using sol-gel derived PZT(90/10) and PZT(10/90) powders. All specimens show a uniform ferroelectric grain without the presence of the pyrocholre phase. Average grain size increased with an increase in sintering temperature, the value for the x=0.65 specimen sintered at 125$0^{\circ}C$ was 14.4$\mu$m. The dielectric constant and dielectric loss of the x=0.65 specimen sintered at 125$0^{\circ}C$ were 1247, 2.06%, respectively. All specimens showed fairly good temperature and frequency stability of dielectric constant with the range from -2$0^{\circ}C$ to 6$0^{\circ}C$ and 100Hz to 10MHz. The coercive field and the remanent polarization of x = 0.65 specimen sintered at 125$0^{\circ}C$ were 8.5 kV/cm and 13 $\mu$C/cm$^2$, respectively. The pyroelectric coefficient of the x=0.65 specimen sintered at 125$0^{\circ}C$ was 5.64$\times$10$^{-8}$ C/cm$^2$K, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제21권11호
• /
• pp.1116-1122
• /
• 2011

In this study, site-directed mutagenesis was performed on the ${\beta}$-agarase AgaA gene from Zobellia galactanivorans to improve its catalytic activity and thermostability. The activities of three mutant enzymes, S63K, C253I, and S63K-C253I, were 126% (1,757.78 U/mg), 2.4% (33.47 U/mg), and 0.57% (8.01 U/mg), respectively, relative to the wild-type ${\beta}$-agarase AgaA (1,392.61 U/mg) at $40^{\circ}C$. The stability of the mutant S63K enzyme was 125% of the wild-type up to $45^{\circ}C$, where agar is in a sol state. The mutant S63K enzyme produced 166%, 257%, and 220% more neoagarohexaose, and 230%, 427%, and 350% more neoagarotetraose than the wild-type in sol, gel, and nonmelted powder agar, respectively, at $45^{\circ}C$ over 24 h. The mutant S63K enzyme produced 50% more neoagarooligosaccharides from agar than the wild-type ${\beta}$-agarase AgaA from agarose under the same conditions. Thus, mutant S63K ${\beta}$-agarase AgaA may be useful for the production of functional neoagarooligosaccharides.

• 마이크로전자및패키징학회지
• /
• 제26권1호
• /
• pp.23-28
• /
• 2019

타이타니아 ($TiO_2$)는 독성이 없고 매우 높은 굴절률, 촉매 활성 및 생체 적합성을 지니고 있으며 화학적 안정성이 있고 높은 이방성을 갖는 저렴한 재료로써 다양한 분야에서 각광받고 있는 세라믹 소재이다. 이러한 $TiO_2$를 sol-gel법을 이용하여 나노입자화 하였다. 나노입자 형성중에 pH를 조절하여 $TiO_2$의 결정성을 제어하였다. 합성된 나노입자는 엑스선 회절분석법, 퓨리에 분광기(Fourier transform infrared), 전계방사형 주사전자현미경(field emission scanning electron microscopy)과 포토루미네선스(photoluminescence spectroscopy)를 이용하여 분석하였다. 합성된 $TiO_2$ 나노입자는 5 nm 이하의 크기를 갖는 것을 확인하였다. 나노입자의 결정성이 증가됨에 따라 550 nm 영역의 발광세기가 증가함을 확인하였다. 이러한 결과로 $TiO_2$ 나노입자의 결정성 조절을 통한 발광 특성 조절을 기대할 수 있다.

• 한국재료학회지
• /
• 제32권9호
• /
• pp.384-390
• /
• 2022

A spin coating process for RRAM, which is a TiN/TiO₂/FTO structure based on a PTC sol solution, was developed in this laboratory, a method which enables low-temperature and eco-friendly manufacturing. The RRAM corresponds to an OxRAM that operates through the formation and extinction of conductive filaments. Heat treatment was selected as a method of controlling oxygen vacancy (V_O), a major factor of the conductive filament. It was carried out at 100 ℃ under moisture removal conditions and at 300 ℃ and 500 ℃ for excellent phase stability. XRD analysis confirmed the anatase phase in the thin film increased as the heat treatment increased, and the Ti³⁺ and OH- groups were observed to decrease in the XPS analysis. In the I-V analysis, the device at 100 ℃ showed a low primary SET voltage of 5.1 V and a high ON/OFF ratio of 10⁴. The double-logarithmic plot of the I-V curve confirmed the device at 100 ℃ required a low operating voltage. As a result, the 100 ℃ heat treatment conditions were suitable for the low voltage driving and high ON/OFF ratio of TiN/TiO₂/FTO RRAM devices and these results suggest that the operating voltage and ON/OFF ratio required for OxRAM devices used in various fields under specific heat treatment conditions can be compromised.

• 한국분말재료학회지
• /
• 제30권4호
• /
• pp.346-355
• /
• 2023

Epoxy-based composites find extensive application in electronic packaging due to their excellent processability and insulation properties. However, conventional epoxy-based polymers exhibit limitations in terms of thermal properties and insulation performance. In this study, we develop epoxy-based siloxane/silica composites that enhance the thermal, mechanical, and insulating properties of epoxy resins. This is achieved by employing a sol-gel-synthesized siloxane hybrid and spherical fused silica particles. Herein, we fabricate two types of epoxy-based siloxane/silica composites with different siloxane molecular structures (branched and linear siloxane networks) and investigate the changes in their properties for different compositions (with or without silica particles) and siloxane structures. The presence of a branched siloxane structure results in hardness and low insulating properties, while a linear siloxane structure yields softness and highly insulating properties. Both types of epoxy-based siloxane/silica composites exhibit high thermal stability and low thermal expansion. These properties are considerably improved by incorporating silica particles. We expect that our developed epoxy-based composites to hold significant potential as advanced electronic packaging materials, offering high-performance and robustness.

• 한국분말재료학회지
• /
• 제30권2호
• /
• pp.107-115
• /
• 2023

Li_1.3Al_0.3Ti_1.7(PO₄)₃(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide potential window (~6 V), and relatively high ion conductivity (10^-3-10^-4 S/cm). Solid electrolytes based on LATP are manufactured via sintering, using LATP powder as the starting material. The properties of the starting materials depend on the synthesis conditions, which affect the microstructure and ionic conductivity of the solid electrolytes. In this study, we synthesize the LATP powder using sol-gel and co-precipitation methods and characterize the physical properties of powder, such as size, shape, and crystallinity. In addition, we have prepared a disc-shaped LATP solid electrolyte using LATP powder as the starting material. In addition, X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopic measurements are conducted to analyze the grain size, microstructures, and ion conduction properties. These results indicate that the synthesis conditions of the powder are a crucial factor in creating microstructures and affecting the conduction properties of lithium ions in solid electrolytes.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.503-510
• /
• 2005

본 연구는 졸-겔법을 이용하여 복합 알루미나를 제조하였고, 다양한 첨가제의 첨가에 의한 복합 알루미나의 열적 안정성을 고찰하였다. $1,200^{\circ}C$에서 소성시킨 복합 알루미나의 열적 안정성은 사용된 첨가제에 따라서 $Si{\fallingdotseq}La$ > Ti > $Ba{\fallingdotseq}Ce$ > Y > $Zr{\fallingdotseq}Mg$ 순으로 나타났다. 특히 실리카 첨가시 ${\alpha}$-알루미나로의 상전이 온도를 $150^{\circ}C$이상 높여 $1,200^{\circ}C$에서 소성 후에도 ${\gamma}$-형에서 ${\delta}$-형의 알루미나 상을 유지함을 알 수 있었고, 비표면적이 $3m^2/g$인 ${\alpha}$-알루미나에 비해 $71m^2/g$(비표면적) 범위까지 증가됨을 보였다. 이러한 알루미나 입자의 특성변화는 실리카 첨가 알루미나의 경우 고온으로 소성시 Si-O-Al의 결합의 증가로 인하여 알루미나의 상전이를 지연시키는 결과로 나타나고, 란타늄 첨가 알루미나의 경우 $LaAlO_3$ 구조의 존재로 인해 알루미나의 입자간 소결을 지연시킴을 알 수 있었다. 또한 란타늄 첨가시 $1,000^{\circ}C$ 이하에서 소성시킨 경우 란타늄이 알루미나 표면에 $La_2O_3$ 구조로 존재하나 $1,000^{\circ}C$ 이상에서는 $LaAlO_3$의 perovskite 구조로 존재하고, $1,300^{\circ}C$ 이상에서는 $LaAl_{11}O_{18}$의 magneto-plumbite 구조로 존재함을 XRD와 XPS 분석 결과에 의해 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.78-94
• /
• 2005

Purpose. The purpose of this study was to compare the effects of various surface treatments by measuring resonance frequency and histomorphometric analyses. Material and methods. In 5 adult dogs, the mandibular premolar were extracted. Six months later, 30 screw titanium implants (Dentium Co., Seoul, Korea) 6mm in length and 3.4mm in diameter, were placed in the mandibles of 5 dogs. Implants were divided into five groups following to surface treatment methods ; Group 1 is machined controls, Group 2 is sandblasted with large grit and acid-etched (SLA), Group 3 is anodized (Autoelectric Co., Korea, 660Hz, Duty10), Group 4 is hydroxyapatite(HA) coated by ion beam assisted deposition(E-beam), Group 5 is hydroxyapatite(HA) coated with Sol-gel coating process. Resonance frequency was measured implant placement immediately, and 3, 6 weeks and 10 weeks of healing perods. With the animal subject's sacrifice 10 weeks after implantation, implants were removed on bloc and histologic and computer-based histomorphometric analyses were performed. Histomorphometric analysis involved quantification of the entire bone to metal contact around the implants. Statistical analyses were performed using the SPSS for Windows (ver. 9.0 SPSS Inc.) Statistical differences were considered significant at P<0.05. Results. The results were as follows : 1) In five groups, mean value of resonance frequency analysis(RFA) were highest in group 5 (Sol-gel implant) at implantation and those of group 4 (E-beam)was highest at 10 weeks . but there was no correlation between surface treatments and RFA. 2) In all surface treatment groups, the RFA values of implants decreased until 3 weeks and increased to 10 weeks. 3) The percentage of direct bone-to-implant contact (BIC) had statistical significance between five groups in cancellous bone, (P<0.05) the percentage of bone density inside the thread had no statistical significance between five groups. (P>0.05) 4) There was a significant difference between cortical bone and cancellous bone in BIC. (P<0.05) and bone density. (P<0.05) 5) There was a correlation between the RFA value of implants at 10 weeks and BIC in cancellous bone, and between the RFA value of implants at 10 weeks and bone density in cortical bone. (P<0.05). Conclusions. These results indicate that surface treatment does not affect the implant stability in case of good bone quality.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.292-299
• /
• 2012

Beads mill 분산 공정을 통하여 8 wt%의 나노 사이즈 흄드 실리카(일차 입자크기 12 nm)를 광경화형 아크릴 시스템용 단량체에 분산하여 실리카 분산체를 제조하였다. 이러한 분산체는 유/무기 하이브리드 코팅 재료에 응용이 가능하다고 알려져 있다. 하이드록시기 유무, 용해도 상수(solubility parameter, Sp, 극성도 ${\delta}_p$의 범위; 5.204~6.286($cal/cm^3)^{1/2}$), 분자 크기가 다른 4 종의 단량체를 사용하였다. 극성 용매인 이소프로필알코올(IPA)을 혼합하여 용매가 실리카 분산체의 안정성에 미치는 영향도 관찰하였다. 제조된 실리카 분산체는 레오미터를 이용하여 전단속도에 따른 전단 점도 거동과 주기적 진동흐름 하에서 동적 거동을 측정하여 분산체의 안정성을 유변학적 관점에서 관찰하였다. 단일 단량체계 및 혼합 단량체계 실리카 분산체에서 하이드록시기를 가진 단량체의 함량이 증가될수록 실리카 분산체는 손실탄성률(G")이 저장탄성률(G')보다 큰 입자가 응집되지 않는 안정한 졸의 거동을 나타내었다. 하이드록시기를 갖지 않은 단량체계 실리카 분산체는 분자 크기와 상관없이 입자가 응집되는 겔의 거동을 나타내었다. 단량체에 IPA를 혼합한 실리카 분산체는 IPA의 함량이 증가할수록 안정한 졸의 거동을 보였다.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.252-258
• /
• 2002

Titanium(IV) isopropoxide에 킬레이팅 리간드로 Acetylacetone(Acac), Ethyl-acetoacetate(Etac) 그리고, Ethanolamine을 첨가시켜 변형된 티타늄 알콕사이드를 합성한 후 졸-겔 방법으로 투과성 티타늄 산화물 박막을 제조하였다. 박막 제조 조건이 최적의 상태일 때는 티타니아 졸 용액의 농도가 3wt% 이하이고, 리간드로는 Acetyl acetone(Acac)를 선택하고, pH가 2.5로 조절하였을 때였다. 순수한 티타늄 산화물 박막보다는 리간드가 치환된 박막들의 굴절률이 더 높았고 가시광선 영역에서 80% 이상의 투과율을 나타냄을 알 수 있었다. 티타니아 졸 상태에서는 입자 크기가 나노 크기를 나타냈으며 분말로 소성 후 마이크론 크기로 증가함을 알 수 있었다. 티타늄 박막들은 400$^{\circ}$C에서 무정형에서 anatase로 상전이가 일어나고 700$^{\circ}C$에서는 rutile로 변화됨을 XRD로 관찰하였다. 박막의 결정형태와 모양 및 크기도 SEM과 XRD로 측정하였다. 또한 분말의 물성 및 구조를 SEM, XRD, TGA 그리고 DSC로 알아보았고, 박막의 광학적 특성에 대해서는 ellipsometer로 굴절률과 막두께를 측정하여 비교하여 보았다.