• 한국자기학회지
• /
• 제4권2호
• /
• pp.179-183
• /
• 1994

자왜 또는 자기이방성의 측정에 사용되는 전자석의 여자전류를 측정에 필요한 수초간만 흘려서 에너지 소모 및 측정시의 최대난점인 시료의 온도변화의 문제를 극소화하였다. 따라서 전자석의 냉각장치는 생략되고 크기와 전원의 용량도 극소화되었다. 공기간격 22 mm, 자극의 단면적 $40{\times}25mm^{2}$에서 0.5 T의 자장발생에는 180 W의 전원으로 족하였다. 시료의 자왜와, 자기이방성에 의한 토크를 전기용량센서에 의하여 측정하여 $10^{-8}$의 자왜분해능과 1 nJ의 토크 분해능을 얻었다. $0.02{\times}0.8{\times}10mm^{2}$의 연자성 리본의 형상이방성을 이용하여 이방성 측정시의 토크값을 교정하였다.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.363-367
• /
• 2011

We have designed, fabricated and demonstrated a novel micro-system for programmable magnetic actuation using magnetic elliptical pathways on Si substrates. Lithographically patterned soft NiFe ellipses are arranged sequentially perpendicular to each other as stepping stones for the transport of magnetic beads. We have measured the magnetization curve of the ellipsoid ($9\;{\mu}m{\times}4\;{\mu}m{\times}0.1\;{\mu}m$) elements with respect to the long and short axes of the ellipse. We found that the magnetization in the long axis direction is larger than that in the short axis direction for an applied field of ${\leq}$ 1,000 Oe, causing a force on carriers that causes them to move from one element to another. We have successfully demonstrated a micro-system for the magnetic actuation of biomolecule carriers of superparamagnetic beads (Dynabead$^{(R)}$ 2.8 ${\mu}m$) by rotating the external magnetic field. This novel concept of magnetic actuation is useful for future integrated lab-on-a-chip systems for biomolecule manipulation, separation and analysis.

• Journal of Magnetics
• /
• 제13권3호
• /
• pp.92-96
• /
• 2008

There are few reports of high frequency loss behavior in the near-field for magnetic films with semiconducting properties, even though semiconducting magnetic materials, such as soft magnetic amorphous alloys and nanocrystalline thin films, have been demonstrated. The electromagnetic loss behavior of multilayer magnetic films with semiconducting properties on the microstrip line in quasi-microwave frequency band was analyzed numerically using a commercial finite-element based electromagnetic solver. The large increase in the absorption performance and broadband characteristics of the semiconducting/insulating layer magnetic films examined in this study were attributed to an increase in the loss factor of resistive loss. The electromagnetic reflection increased significantly with increasing conductivity, and the loss power deteriorated significantly. The numerical results of the magnetic field distribution showed that a strong radiated signal on the microstrip line was emitted with increasing conductivity and decreasing film thickness due to re-reflection of the radiated wave from the surface of the magnetic film, even though the emitted levels varied with film thickness.

• 한국자기학회지
• /
• 제7권4호
• /
• pp.180-185
• /
• 1997

비정질 리본으로 제조된 링 코아 시편의 자장중 열처리 조건에 따른 철손 및 보자력 등의 연자기 특성 변화를 BH loop tracer를 이용하여 최대인가자기유도 0.1 T를 유지하면서 10 kHz에서 측정하였다. 열처리 시간이 증가함에 따라 코아의 철손 및 보자력은 감소하여 최소값에 도달한 다음 다시 증가한다. 공기 중에서 열처리한 경우의 시료가 Ar 분위기에서 열처리한 시료 보다 우수한 연자기 특성을 나타낸다. 코아의 원주방향으로 자장을 인가한 경우에는 인가자장의 세기가 6 Oe 이상이어야 자장중 열처리 효과가 나타나 철손 및 보자력이 감소하였으며, 냉각시 Curie 온도근처에서의 냉각속도가 빠를 수록 철손과 보자력은 감소한다. 코아의 폭 방향으로 자장을 인가한 경우에는 보자력의 증가와 투자율의 감소 및 약간의 철손 증가가 나타났다.

• Journal of Magnetics
• /
• 제8권1호
• /
• pp.18-23
• /
• 2003

In our previous work, microstructure and magnetic properties of two-phase exchange-coupled $Sm_2Fe_{15}Ga_2C_{x}$/$\alpha$-Fe nanocomposites have been investigated by means of x-ray diffraction, transmission electron microscopy and magnetization measurement. It was found the exchange coupling between the magnetically hard phase $Sm_2Fe_{15}Ga_2C_{x}$ and the magnetically soft one ${\alpha}$-Fe results in an enhancement of the remanence. The sizes of crystallites of both phases are, however much larger than the Block domain-wall width of the magnetically hard phase. This microstructure gives rise to a concave demagnetization curve and consequently reduces the maximum energy Product. In order to improve their magnetic properties, a few Percent of Zr, which may be effective to refine the microstructure through rapid quenching, was introduced into the nanocomposites. The addition of Zr was found to improve the magnetic properties significantly, Under optimum heat-treatment conditions, the remanence, coercivity and maximum energy Product increase from 0.65 T, 0.48 T and 50 kJ/$m^{3}$ for the Zr-free sample to 0.72 T, 0.77 T and 71.6 kJ/$m^{3}$ for the 1 at.% Zr-containing one, respectively, The improvements of magnetic properties are due to the refinement of microstructure by the addition of Zr.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.225-228
• /
• 2011

Magnetic properties and Rockwell hardness of 1Cr-0.5Mo steel have been investigated as a function of isothermal aging time. Our results showed that coercivity, hysteresis loss and Rockwell hardness in the aged samples decreased as aging time increased. This phenomenon was analyzed using optical microscopy and scanning electron microscopy. A significant diffusion of Cr and Mo atoms formed $M_2C$ and $M_7C$ carbides, lowering the matrix strength. $M_2C$ and $M_7C$ carbides partially segregated inside grains, diffused into grain boundaries, and finally resulted in a soft ferrite matrix and a hard grain boundary. The magnetic and mechanical softening of the matrix is likely to govern the properties of the sample more than the hardening of the grain boundary by carbide precipitations.

• Journal of Magnetics
• /
• 제15권4호
• /
• pp.194-198
• /
• 2010

In our present work, we developed a GMI (giant magnetoimpedance) sensor system to detect magnetic fields in the milli gauss range based on the asymmetric magnetoimpedance (AGMI) effect in Co-based amorphous ribbon with self bias field produced by field-annealing in open air. The system comprises magnetoimpedance sensor probe, signal conditioning circuits, A/D converter, USB controller, notebook computer, and program for measurement and display. Sensor probe was constructed by wire-bonding the cobalt based amorphous ribbon with dimensions $10\;mm\;{\times}\;1\;mm\;{\times}\;20\;{\mu}m$ on a printed circuit board. Negative feedback was used to remove the hysteresis and temperature dependence and to increase the linearity of the system. Sensitivity of the milli gauss meter was 0.3 V/Oe and the magnetic field resolution and environmental noise level were less than 0.01 Oe and 2 mOe, respectively, in an unshielded room.

• 한국자기학회지
• /
• 제11권3호
• /
• pp.114-121
• /
• 2001

순털 코아의 소결밀도와 자기특성에 미치는 분진의 첨가량과 소결온도의 영향을 조사하였다. 1350 $^{\circ}C$에서 1시간동안 소결한 경우 최고의 자기특성을 나타내었으며, 분진의 첨가량이 증가할수록 자기특성은 열악해지나 10 wt.%까지는 양호하였다. 한 예로 10 Wt.%의 분진 첨가로 얻어진 직류자기특성은, 자속밀도(B$_{15}$), 보자력(H$_{c}$)과 최대투자율($\mu$$_{max}$)이 각각 9.8~10.9 kG, 2.2~2.3 Oe, 1950~2050로 나타났다. 이 값은 Hoganas사에서 제조된 순철 분말(Ancorsteel)의 자기특성과 동등한 수준이며, 본 연구에서 얻어진 우수한 특성의 소결코아는 자동차, DC 모터의 고정자 등에 활용이 기대된다.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.235-238
• /
• 2016

Microstructure and magnetization behaviors of $MnBi/Fe_3B/Nd2_Fe_{14}B$ nanocomposite alloy have been investigated. It was found that the coercivity increased firstly and then decreased, and saturation magnetization decreased with the additon of MnBi alloy. The addition of 40 wt.% MnBi powder enhanced the coercivity from 192.8 kA/m to 311.2 kA/m. The ${\delta}M$ and D(H)-H plots suggested the occurrence of a stronger exchange-coupling occurring between the hard and soft magnetic phase for this sample. The dependence of coercivity with temperature was discussed in 40 wt.% $Mn_{55}Bi_{45}$/ 60 wt.% $Nd_{4.5}Fe_{76.5}Nb_{0.5}B_{18.5}$ alloy powder, and a positive temperature coefficient was founded from 298 K to 350 K.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.192-196
• /
• 2016

The Fe-Si-B-Nb-Cu alloys containing Ca and Al were rapidly solidified to thin ribbons by melt-spinning. The ribbons were ball-milled to make powders, and then mixed with 1 wt.% water glass and 1.5 wt.% lubricant. The mixed powders were burn-off, and then compacted to form toroidal-shaped cores, which were heat treated to crystallize the nano-grain structure and to remove residual stress of material. The characteristics of the powder cores were analyzed using a differential scanning calorimetry (DSC) and a B-H meter. The microstructures were observed using transmission electron microscope (TEM). The optimized soft magnetic properties (${\mu}_i$ and $P_{cv}$) of the powder cores were obtained from the Ca and Al containing alloys after annealing at $530^{\circ}C$ for 1 h. The core loss of Fe-Si-B-Nb-Cu-based powder cores was reduced by the addition of Ca element, and the initial permeability increased due to the addition of Al element.