• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.18-26
• /
• 2011

Debates concerning the competitive edge of leading 3DTV technology of the shutter glasses (SG) 3D and the film-type patterned retarder (FPR) are flaring up. Although SG technology enables Full-HD 3D vision, it requires complex systems including the sync transmitter (emitter), the sync processor chip, and the LCD lens in the active shutter glasses. In addition, the transferred sync-signal is easily affected by the external noise and a 3DTV viewer may feel flicker-effect caused by cross-talk of the left and right image. The operating current of the sync processor in the 3DTV active shutter glasses is gradually increasing to compensate the sync reconstruction error. The proposed chip is a low-power hardware sync processor based discrete-event SoC(system on a chip) designed specifically for the 3DTV active shutter glasses. This processor implements the newly designed power-saving techniques targeted for low-power operation in a noisy environment between 3DTV and the active shutter glasses. This design includes a hardware pre-processor based on a universal edge tracer and provides a perfect sync reconstruction based on a floating-point timer to advance the prior commercial 3DTV shutter glasses in terms of their power consumption. These two techniques enable an accurate sync reconstruction in the slow clock frequency of the synchronization timer and reduce the power consumption to less than about a maximum of 20% compared with other major commercial processors. This article describes the system's architecture and the details of the proposed techniques, also identifying the key concepts and functions.

• Culinary science and hospitality research
• /
• v.8 no.2
• /
• pp.59-76
• /
• 2002

After 1990, Food service industry is growing up so fast and asking a lot of employee to be able to work this one. Our society will continue the growth of quantity and quality of food service industry with closing to the developed country and increasing the national income and leisure time. But our present culinary education system cannot gain the efficient of professional training to adopt food service industry without re-education and training. So, in our culinary education we have to be introduced new education system which is used effectively as a professional culinary education system in C.I.A. This system has merit to be able to teach step by step from basic to advanced course. Also Most of school system(management purchasing, human research, school life, etc.) is focused for culinary education. But, although this system has a lot of merits, it is too early toy us to adopt in our culinary education system. Because our education system has too much limited educational administrations of government and school for introducing new education system. The present educational situation is not enough to have facilities and financial support Finally, our culinary educational system have to change to right direction to improve in culinary education. Block system is one of the well-prepared system. But we need to administrational support of government and school to be able to adopted to our culinary educational system.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.371-380
• /
• 2007

This paper proposes a new automatic compensation network (ACN) for a system-on-chip (SoC) transceiver. We built a 5 GHz low noise amplifier (LNA) with an on-chip ACN using 0.18 ${\mu}m$ SiGe technology. This network is extremely useful for today's radio frequency (RF) integrated circuit devices in a complete RF transceiver environment. The network comprises an RF design-for-testability (DFT) circuit, capacitor mirror banks, and a digital signal processor. The RF DFT circuit consists of a test amplifier and RF peak detectors. The RF DFT circuit helps the network to provide DC output voltages, which makes the compensation network automatic. The proposed technique utilizes output DC voltage measurements and these measured values are translated into the LNA specifications such as input impedance, gain, and noise figure using the developed mathematical equations. The ACN automatically adjusts the performance of the 5 GHz LNA with the processor in the SoC transceiver when the LNA goes out of the normal range of operation. The ACN compensates abnormal operation due to unusual thermal variation or unusual process variation. The ACN is simple, inexpensive and suitable for a complete RF transceiver environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.22-28
• /
• 1998

It is required to automate a manufacturing industry of a glasses frame, because of the inaccuracy in assembly and shortage of labor. So, in this paper, rim-lock electric welding system has been developed in order to automate a electric welding process and to increase welding quality. Rim-lock electric welding system consists of circular and linear feeder, holder for welding rim and lock, and the equipment for silver-lead provision and so forth. Main controller is a V55 microprocessor which is easy to be expanded into other function. Control program is programed using 'C' language which is easier than other language in coding, modification and adding function. At the practical welding that Rim-Lock electric welding system from this study is used, we can get such advantages as uniform quality of electric welding, continuous operation and improved productivity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.390-398
• /
• 2004

This paper describes a study on the automatic generation system of the interface for communication among AMBA bus and IPs with different protocols. Employing an extended STG, the proposed system generates the interface modules required for the communication among IPs with different protocols. For an example system, the interface module for communication between AMBA AHB bus and a video decoder has been generated and verified in its functionality. The area and latency have been compared with the manually designed interface. For burst-mode communication, the generated interface module shows the comparable performance with the manually designed module. For single-mode communication, the generated interface module shows a slightly worse performance than the manually designed module. However, the increased area is negligible considering the size of the IP.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.1
• /
• pp.65-74
• /
• 2008

In Korea, air source heat pump system is less efficient than conventional heat source facilities, such as ground source, river water, because the air temperature in winter season is so low that COP of air source heat pump system drops below 3.0. Therefore, the study on the application of heat pump heating and cooling systems is crucial for the efficient popularization of heat pump. In this work, we present the dynamic analysis of energy consumption for the large resident building by heat resistance-capacitance method. The system simulation of water storage air source heat pump is additionally performed by changing of sizes and locations of the hospital building. The computed results show that energy cost of water storage air source heat pump is low, so it is more economical than absorption chiller & heater.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1295-1297
• /
• 1996

CCITT G.721, G.723 standard ADPCM algorithm is implemented by using TI's fixed point DSP start kit (DSK). ADPCM can be implemented on a various rates, such as 16K, 24K, 32K and 40K. The ADPCM is sample based compression technique and its complexity is not so high as the other speech compression techniques such as CELP, VSELP and GSM, etc. ADPCM is widely applicable to most of the low cost speech compression application and they are tapeless answering machine, simultaneous voice and fax modem, digital phone, etc. TMS320C50 DSP is a low cost fixed point DSP chip and C50 DSK system has an AIC (analog interface chip) which operates as a single chip A/D and D/A converter with 14 bit resolution, C50 DSP chip with on-chip memory of 10K and RS232C interface module. ADPCM C code is compiled by TI C50 C-compiler and implemented on the DSK on-chip memory. Speech signal input is converted into 14 bit linear PCM data and encoded into ADPCM data and the data is sent to PC through RS232C. The ADPCM data on PC is received by the DSK through RS232C and then decoded to generate the 14 bit linear PCM data and converted into the speech signal. The DSK system has audio in/out jack and we can input and out the speech signal.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.63-68
• /
• 2002

JPEG2000은 기존의 정지영상압축부호화 방식에 비해 우수한 비트율-왜곡(Rate-Distortion)특성과 향상된 주관적 화질을 제공하며 인터넷, 디지털 영상카메라, 이동단말기, 의학영상 등 다양한 분야에서 적용될 수 있는 새로운 정지영상압축 표준이다. 본 논문에서는 SoC(System on a Chip)설계를 고려한 JPEG2000 인코더의 구조를 제안하고 IP(Intellectual Property)를 설계 및 검증하였다. 구현된 JPEG2000 IP는 DWT(Discrete Wavelet Transform)블록, 스칼라양자화블록, EBCOT(Embedded Block Coding with Optimized Truncation)블록으로 구성되어 있다. IP는 모의실험을 통해 구현 구조에 대한 타당성을 검증하였고, 반도체설계자산연구센터에서 제시한 'RTL Coding Guideline'에 따라 HDL을 설계하였다. 특히, DWT블록은 구현시 많은 연산과 메모리 용량이 필요하므로 영상을 저장할 외부 메모리를 사용하였고, 빠른 곱셈과 덧셈연산을 위한 3단 파이프라인 부스곱셈기(3-state pipeline booth multiplier)와 캐리예측 덧셈기(carry lookahead adder)를 사용하였다. 설계된 JPEG2000 IP들은 삼성 0.35$\mu\textrm{m}$ 라이브러리를 이용하여 Synopsys사 Design Analyzer 틀을 통해 논리 합성하였으며, Xillinx 100만 게이트 FPGA칩에 구현하여 그 동작을 검증하였다. 또한, Hard IP 설계를 위해 Avanti사의 Apollo툴을 이용하여 Layout을 수행하였다.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.50-55
• /
• 2017

In this paper, the design of the RF system monitoring and control system of KUS (KASS: KASS Uplink Station) which constitutes KASS (Korea Augmentation Satellite System) is described. The Korean satellite calibration system is named KASS and aims to develop the SBAS system of the APV-1 level SoL service level and the CAT-1 test operation technology. Software and hardware development environment, function and algorithm of supervisory control device, structure of supervisory control device, and user interface were designed to implement KUS / RFS monitoring control device. We have secured the stability and reliability of the system by using the monitoring and control system design of the COMS (Communication Ocean & Meteorological Satellite) and the Korea Satellite 5A / 7 control system, which has already been used for the design of the surveillance control system. In addition, we have made it possible to provide the user interface according to the actual operator's request more conveniently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2532-2537
• /
• 2012

In recent, the researches on driver assistance systems have been actively performed with development of vehicle industry. AVM(Around View Monitoring) Systems, a part of these systems, have been researching and developing. Existing AVM systems have been developed in the forms of embedded systems or a SoC (System on Chip) to provide view around vehicle in real time. However, if Car PC is equipped with in vehicle, AVM can be developed using only software without additional cost. In this study, we implemented AVM system which provides location information by adding the informations such as latitude, longitude and speed to functions of "Car PC" based AVM system. If storing function is added to the AVM system implemented in this study which provides location information, the system with storing function can be used as AVM black box system.