• 로봇학회논문지
• /
• 제18권3호
• /
• pp.285-292
• /
• 2023

Small-scale ground mobile robots can access confined spaces where people or larger robots are unable. As the scale of the robot decreases, the relative size of the environment increases; therefore, maintaining the mobility of the small-scale robot is required. However, small-scale robots have limitations in using a large number of high-performance actuators, powerful computational devices, and a power source. Insects can effectively navigate various terrains in nature with their legged motion. Discrete contact with the ground and the foot enables creatures to traverse irregular surfaces. Inspired by the leg motion of the insect, researchers have developed small-scale robots and they implemented swing and lifting motions of the leg by designing leg linkages that can be adapted to small-scale robots. In this paper, we propose a leg linkage design for insect-inspired small-scale ground mobile robots. To use minimal actuation and reduce the control complexity, we designed a 1-DOF 3-dimensional leg linkage that can generate a proper leg trajectory using one continuous rotational input. We analyzed the kinematics of the proposed leg linkage to investigate the effect of link parameters on the foot trajectory.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.270-277
• /
• 2019

Inspired by small insects, which perform rapid and stable locomotion based on body softness and tripod gait, various milli-scale six-legged crawling robots were developed to move rapidly in harsh environment. In particular, cockroach's leg compliance was resembled to enhance the locomotion performance of the crawling robots. In this paper, we investigated the effects of changing leg compliance for the locomotion performance of the small light weight legged crawling robot under various payload condition. First, we developed robust milli-scale six-leg crawling robot which actuated by one motor and fabricated in SCM method with light and soft material. Using this robot platform, we measured the running velocity of the robot depending on the leg stiffness and payload. In result, there was optimal range of the leg stiffness enhancing the locomotion ability at each payload condition in the experiment. It suggests that the performance of the crawling robot can be improved by adjusting stiffness of the legs in given payload condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.398-402
• /
• 1996

This paper addresses the design and the gait control of quadruped walking robot. First, we concern the mechanical and electronical(control system) hardware of walking robot, and the second is the results of experiments. The walking robot is the most suitable form to substitute fot human being. So walking robot is worthy of research. The quadruped walking robot and control system is the simplest type of walking robot, therefore we designed a small seale robot for realization of static gait. The robot is designed commpactly and its legs are constructed parallel link type and able to move freely in space. Control system consists of one upper level controller and four lower level controllers. The upper level controller plans the walking path and commands the low level controllers to follow the planned path. The main function of low level cotrollers is control of motors. Total number of motors is twealve and they operate four legs. And robot is ordered to walk and realize static wave gait.

• 로봇학회논문지
• /
• 제13권2호
• /
• pp.97-102
• /
• 2018

A small and lightweight crawling robots have been actively studied thanks to their outstanding mobility and maneuverability. Those robots can navigate into more confined spaces that larger robots are unable to reach or enter such as debris and caves. In this paper, we propose a milli-scale hexapedal robot based on planar linkage design. To make this possible, two necessary conditions for successful crawling are satisfied: thrust force from the ground and aerial phase while running. These conditions are achieved through a newly developed leg design. The robot has a pair of legs and each leg has three feet. Those feet alternatively moves based on 1DOF planar linkage. This linkage is installed at each side of the robot and finally the robot shows the alternating gait and aerial phase during running. As a result, the robot runs with the crawling speed of 0.9 m/s.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.380-385
• /
• 2020

Over the past decade, small robots have been of particular interest in the engineering field. Among the various types of small robots, biomimetic robots, which mimic animals and insects, have been developed for special activities in areas where humans cannot physically access. The optimal motion of a walking robot can be determined by the characteristics of the traversed surface (e.g., roughness, curvature, slope, materials, etc.). This study proposes three types of piezoelectric structures using different driving mechanisms, depending on the application range of the small walking robots. Dynamic modeling using computer-aided engineering optimized the shape of the robot to maximize its moving characteristics, and the results were also verified through its fabrication and experimentation. Three types of robots, named by their actuator shapes as I, π, & T-shape, were proposed regarding application for small scale ambulatory robots to different terrain conditions. Among these, the T-shaped robots were shown to have a wide range of speeds (from 2 mm/s up to 255 mm/s) and good carrying capacity (up to 10 g at 50 mm/s) through driving experiments. Based on this study, we proposed possible application areas for the three types of walking robot actuators.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.193-194
• /
• 2010

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.690-693
• /
• 2004

This paper proposes a multi-resolution electrostatic potential field (MREPF) based solution to the mobile robot path planning and collision avoidance problem in 2D dynamic environment. The MREPF is an environment method in calculation time and updating field map. The large scale resolution map is added to EPF and this resolution map interacts with the small scale resolution map to find an optimal solution in real time. This approach can be interpreted with Atlantis model. The simulation studies show the efficiency of the proposed algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1427-1432
• /
• 2008

This paper describes the locomotion of a water jumping robot which attempts to emulate the fishing spider’s ability to jump on the water surface. While previous studies of the robots mimicking arthropods living on water were focused on recreating their horizontal skating motions, here we aim to achieve a vertical jumping motion. The robot jumps by pushing the water surface with rapidly released legs which were initially bent. The motion is triggered with a latch driven by the shape memory alloy actuator. The robot is capable of jumping to the maximum height of 26mm. Jumping efficiency, defined the maximum jumping height on water over the maximum jumping height on rigid ground, is 0.26 This work represents a first step toward robots that can locomote on water with superior versatility including skating and jumping.

• 로봇학회논문지
• /
• 제3권2호
• /
• pp.106-111
• /
• 2008

This paper presents a decentralized coordination for a small-scale mobile robot teams performing a task through cooperation. Robot teams are required to generate and maintain various geometric patterns adapting to an environment and/or a task in many cooperative applications. In particular, all robots must continue to strive toward achieving the team's mission even if some members fail to perform their role. Toward this end, given the number of robots in a team, an effective coordination is investigated for decentralized formation control strategies. Specifically, all members are required first to reach agreement on their coordinate system and have an identifier (ID) for role assignment in a self-organizing way. Then, employing IDs on individual robots within a common coordinate system, a decentralized neighbor-referenced formation control is realized to generate, keep, and switch between different geometric shapes. This approach is verified using an in-house simulator and physical mobile robots. We detail and evaluate the formation control approach, whose common features include self-organization, robustness, and flexibility.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.149-156
• /
• 2014

This paper proposes the battery charging algorithm for small-scale wind power generator using three phase PWM converter. it is impossible to control output power of the converter in over wind speed region since back EMF of PMSG is higer than battery voltage. Therefore, battery charging algorithm is proposed to expand battery charging over wind speed region. The suggested method is using the q-axis current for battery charging in the rated wind speed region. In the over wind speed region after it lower back EMF of PMSG using d-axis current it can control output power of the converter. The validity of the proposed algorithm are verified by experiments.