• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.489-490
• /
• 2012

• Journal of the Korean Society for Library and Information Science
• /
• v.15
• /
• pp.7-44
• /
• 1988

The purpose of this paper is to in vestigate a relative effectiveness of instruction among such three orienting methods as lecture, slide-tape and video-tape which the library of Duk Sung Women's University has applied for orienting the freshmen for the last three years. This research also carried out a sample survey by distributing uniform questinnaire to the three different groups of the students. Each group was oriented with lecture, slide-tape and Video-tape respectively. Finally, the empirical findings of this research are as follows: 1. All three orienting methods were useful for students to improve knowledge as to how to use the library, 2. There were a wide difference in effectiveness among three instructional methods, obviously, the slide-tape method was more effective in the orientation than the lecture method and, furthermore, the video-tape was more effective than the slide-tape one, Therefore, it seem safe to conclude that the media utilization effective in orientation program should be encouraged by the university libraries of Korea.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.58-65
• /
• 1999

The spinning machine has been developed for a bus and truck wheel disc which is manufactured by spinning process method. This machine has the mechanical structure with bed, 2-column, cross head, 2-vertical slide, 2-horizontal slide with forming roller, clamp slide and main spindle similar to large size vertical lathe. Main spindle attached the mandrel is rotated about 500rpm drived by 280kW power DC motor, and a rotating black material pressed on the mandrel with the clamp slide is spinformed by 2-forming rollers which are attached inner end of the 2-horizontal slides. The 2-vertical and 2-horizontal slides are actuated by the hydraulic cylinder which is controlled by the servo valve individially, and these servo valves are controlled by control signal of the CNC controller which is computed with position signal feedbacked from the encoder sensor. The developed machine can manufacture wheel disc of various section profile without mandrel change because section profile is easily modified using program editing in the CNC controller processor. The wheel disc manufactured by spinning process method has many advantages that the endurance is increased by 2 times and the weight is decreased by 30% compared with a conventional disc.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1994.06c
• /
• pp.94-110
• /
• 1994

This paper Voposes a stabilizing method against landslide using slide suppressor wall reinforced with soil nails. Included are a Evuedlwe to predict earth Uessures acing on nailed-slide suppressor wall and a method of analysis of the laterally loaded concrete pile. Based rut the Voposed Vocedure, the emcignt installation type and inclusion angle of nails are analyzed. Also, optimum location of the slide suppressor wall composed of concrete panel and stabilizing pile is examined using the UC Vogram. Finally, an example is given to illustrate the analysis and desisa procedure of the proposed slope reinforcing method.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1225-1235
• /
• 2016

This paper presents a method for computer-assisted slide presentation using vision-based gesture recognition. The proposed method consists of a sequence of steps, first detecting a hand in the scene of projector beam, then estimating the smooth trajectory of a hand or a pointing finger using Kalman Filter, and finally interfacing to an application system. Additional slide navigation control includes moving back and forth the pages of the presentation. The proposed method is to help speakers for an effective presentation with natural improved interaction with the computer. In particular, the proposed method of using finger pointing is believed to be more effective than using a laser pointer since the hand, the pointing or finger are more visible and thus can better grab the attention of the audience.

• Geotechnical Engineering
• /
• v.11 no.1
• /
• pp.79-100
• /
• 1995

This paper proposes a stabilizing method against landslide using slide suppressor wall reinforced with soil nails. Included are a procedure to predict earth pressures acting on the concrete panel and a method of analysis of stabilizing pile. Based on the proposed procedure, the efficient installation type and inclusion angle of nails are analyzed. Also, optimum location of the slide suppressor wall composed of concrete panel and stabilizing pile is analyzed. Finally the comparison with a method proposed by Wright is made, and the effect of interactions between stabilizing piles is examined, throughout the design example.

• Korean Journal of Veterinary Research
• /
• v.10 no.1
• /
• pp.11-23
• /
• 1970

Recently Carter(1952) reported the capsule antigens of Pasteurella multocida could be divided into four serological types A,B,C and D by means of precipitation tests. Subsequently he showed that the most sensitive for identification of these types involved the use of capsule substance adsorbed by erythrocytes in hemagglutination test. It may be somewhat difficult to conduct the hemagglutination test in small laboratory, because relatively large amounts of antisera and erythrocytes of the human O type are required for the test. A simple method for serological typing of P. multocida was the slide agglutination test employed by Little et al. (1943) and Namioka et al. (1962), but this method is still in controversy. The author tried adapting Carter's hemagglutination method to the slide method so called "micromethod technique", and studied on the stabilization of erythrocytes for use of slide hemagglutination to P. multocida although many invesigators reported the stabilization of erythrocytes. The results obtained are summarized as follows: 1. A simplified method (slide method) for capsule typing of the organism was developed by adapting Carter's hemagglutination reaction(tube method). Antibody-containing serum can be diluted serially on Boerner's microtest slide with capillary or serological pipetts with a considerable accuracy. The slide reaction can be carried out with case on the slide by adding $0.05m{\ell}$ of antigen-sensitized erythrocytes suspension diluted to one percent on $0.05m{\ell}$ of serially diluted antibody-containing sera, and the final result can be read after 60 minutes at the room temperature ($15^{\circ}C$). 2. It is difficult to determine superiority of inferiority between the slide method and the tube method on the pattern of the reaction of hemagglutination. 3. The pH range of 6.6 to 8.3 is optimal for the slide hemagglutination reaction. 4. The antigen-sensitization against erythrocytes at $37^{\circ}C$ is optimal for the slide hemagglutination. 5. Both the doses and concentration of antigen do not influence the antigen-adsorbing capacity of erythrocytes. 6. The reduction of antigen-sensitizing hours does not influence the antigen-adsorbing capacity of erythrocytes even 30 minutes. 7. The tannic acid treatment against formalinized and non-formalinized erythrocytes showed no effect on the reaction of hemagglutination. 8. The erythrocytes preserved at $4^{\circ}C$ in the ACD solution do not decrease the reactivity on the reaction of hemagglutination for 60 days, while they begin slight hemolysis 30 days after preserving. 9. The stable preparation of erythrocytes can be obtained by treating the cells at $37^{\circ}C$ for 20 hours with from 4 to 8 percent of formalin in saline or buffer. These cells can be preserved at $4^{\circ}C$ for more than 8 months experimented without hemolysis. With low concentration of formalin, the cells were not sufficiently stabilized resulting in the hemolysis after short period of preservation at $4^{\circ}C$. 10. The erythrocytes treated with 16 percent of formalin remain constantly or increase the reactivity for the reaction of hemagglutination. On the contrary, the cells treated with I to 8 percent of formalin decrease the reactivity. 11. There is no difference between nontreated fresh erythrocytes and the erythrocytes preserved in the ACD solution on the reactivity against the hemagglutination, and the erythrocytes treated with 16 percent of formalin showed the reactivity of higher level than that of the above two kinds of erythrocytes. 12. There is no difference between the saline and the isotonic buffer solution on the reaction of hemagglutination.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.743-750
• /
• 2000

This paper presents an equivalent linearization method and application to the equations of motion of a 6 degree-of-freedom PRRS HexaSlide type parallel manipulators which are characterized as the architecture with constant link lengths that are attached to moving sliders on the ground and to a mobile platform. Since dynamic equations of parallel manipulators are complicated and highly nonlinear, control bandwidth, adjustable control gain as well as vibration characteristics cannot be easily found. The proposed equivalent linearization method can be applied over specified workspace as well as on a path of mobile platform. Through an equivalent linearization method, one can easily get a simple linear dynamic model. This linearized dynamic model may be utilized in a simplified computed torque control strategy.

• Korean journal of applied entomology
• /
• v.25 no.3 s.68
• /
• pp.133-138
• /
• 1986

This study was conducted to compare the methods of slide dip and leaf dip techniques in the resistant level determination of spider mites to acaricides used; .and to investigate resistant levels of two-spotted spider mite, Tetranychus urticae Koch to benzomate, dicofol and cyhexatin in Honam region of Korea. Comparisons of the resistant strains and susceptible strain based on $LC_{50}$ values were summarized. Using the slide dip and leaf dip techniques with benzomate acaricide, the Keumchun strain of T. urticae showed 75-and 69-fold resistant levels, respectively, as compared with the Kwangju susceptible strain, but the Hackyo strain was 38-and 35-fold resistant levels, respectively. There was no significant difference (P>0.05) between the slide dip and leaf dip methods. With dicofol acaricide, resistant levels of the Keumchun strain of T. urticae were 71 times by using the slide dip and 74 times by using the leaf dip as resistant as the Kwangju susceptible strain while the Hackyo strain was 24 times by the former method and 23 times by the later method. There was also no significant difference (P>0.05) between both the methods. The slide dip technique is more recommendable than the leaf dip technique for determination of degree of chemical resistance to the spider mites with accuracy and less variation of the results. Using the slide dip method with cyhexatin, the Bia, Keumchun and Hackyo strains of T. urticae were 19-, 18- and 9-fold resistant levels, respectively, over the Kwangju susceptible strain.

• Journal of Power System Engineering
• /
• v.16 no.6
• /
• pp.52-58
• /
• 2012

Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.